//************************************************************************************ //** //** Source name: C:\Flowcode10\Projekter\NewSun\NewSun.fcfx //** Title: //** Description: //** Device: ESP.ESP32.ESP32_DEVKITV1 //** //** Generated by: Flowcode v10.0.3.31 //** Date: Wednesday, June 28, 2023 17:55:36 //** Users: 1 //** Registered to: jgu1 (43418841) //** Licence key: UBG57W //** //** //** https://www.flowcode.co.uk //** //************************************************************************************ #include "C:\Flowcode10\Projekter\NewSun\NewSun.h" /*========================================================================*\ Use :TypeConversionsFree1 :GUID: :Location: :Version: (0x0) :Timestamp: :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Sets a single 16-bit INT value. :Index is in little endian, 0 is the LSW and 1 is the MSW : :Parameters for macro SetInt: : Index : Range: 0-1 : Value : Range: 0-65535 \*=----------------------------------------------------------------------=*/ void FCD_02571_TypeConversionsFree1__SetInt(MX_UINT8 FCL_INDEX, MX_UINT16 FCL_VALUE) { if (FCL_INDEX < 2) { MX_Conv_Var.AsInt[FCL_INDEX] = FCL_VALUE; // } else { } } /*=----------------------------------------------------------------------=*\ Use :Sets a single 32-bit LONG value : :Parameters for macro SetLong: : Value : Range: 0-4294967295 \*=----------------------------------------------------------------------=*/ void FCD_02571_TypeConversionsFree1__SetLong(MX_UINT32 FCL_VALUE) { MX_Conv_Var.AsLong = FCL_VALUE; } /*=----------------------------------------------------------------------=*\ Use :Gets a single 32-bit FLOAT value : :Returns : MX_FLOAT \*=----------------------------------------------------------------------=*/ MX_FLOAT FCD_02571_TypeConversionsFree1__GetFloat() { //Local variable definitions MX_FLOAT FCR_RETVAL; FCR_RETVAL = MX_Conv_Var.AsFloat; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets a single 32-bit LONG value : :Returns : MX_UINT32 \*=----------------------------------------------------------------------=*/ MX_UINT32 FCD_02571_TypeConversionsFree1__GetLong() { //Local variable definitions MX_UINT32 FCR_RETVAL; FCR_RETVAL = MX_Conv_Var.AsLong; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets a single 16-bit INT value :Index is in little endian, 0 is the LSW and 1 is the MSW : :Parameters for macro GetInt: : Index : Range: 0-1 : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_02571_TypeConversionsFree1__GetInt(MX_UINT8 FCL_INDEX) { //Local variable definitions MX_UINT16 FCR_RETVAL; if (FCL_INDEX < 2) { FCR_RETVAL = MX_Conv_Var.AsInt[FCL_INDEX]; } else { // .Return = 0 FCR_RETVAL = 0; } return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Sets a single 8-bit BYTE value :Index is in little endian, 0 is the LSB and 3 is the MSB : :Parameters for macro SetByte: : Index : Range: 0-3 : Value : Range: 0-255 \*=----------------------------------------------------------------------=*/ void FCD_02571_TypeConversionsFree1__SetByte(MX_UINT8 FCL_INDEX, MX_UINT8 FCL_VALUE) { if (FCL_INDEX < 4) { MX_Conv_Var.AsByte[FCL_INDEX] = FCL_VALUE; // } else { } } /*=----------------------------------------------------------------------=*\ Use :Gets a single 8-bit BYTE value. :Index is in little endian, 0 is the LSB and 3 is the MSB : :Parameters for macro GetByte: : Index : Range: 0-3 : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_02571_TypeConversionsFree1__GetByte(MX_UINT8 FCL_INDEX) { //Local variable definitions MX_UINT8 FCR_RETVAL; if (FCL_INDEX < 4) { FCR_RETVAL = MX_Conv_Var.AsByte[FCL_INDEX]; } else { // .Return = 0 FCR_RETVAL = 0; } return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Sets a single 32-bit FLOAT value : :Parameters for macro SetFloat: : Value : Range: 0-4294967295 \*=----------------------------------------------------------------------=*/ void FCD_02571_TypeConversionsFree1__SetFloat(MX_FLOAT FCL_VALUE) { MX_Conv_Var.AsFloat = FCL_VALUE; } /*========================================================================*\ Use :eeprom1 :GUID: dcbf571f-a6fa-402d-bdd4-be00cca4070f :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\eeprom.fcpx :Version: 4.0 (0x100228) :Timestamp: 20\01\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Writes a 32-bit float value starting at the specified address. :A 32-bit float will consume 4 bytes which will be 4 locations on an 8-bit device or 2 locations on a 16-bit device. : :Parameters for macro WriteFloat: : StartAddress : Initial EE location to start reading : Value : Floating point value to write : MSBFirst : 0=LSB First, 1=MSB First \*=----------------------------------------------------------------------=*/ void FCD_06651_eeprom1__WriteFloat(MX_UINT16 FCL_STARTADDRESS, MX_FLOAT FCL_VALUE, MX_BOOL FCL_MSBFIRST) { //Local variable definitions MX_UINT16 FCL_VAL; MX_UINT8 FCL_IDX; FCD_02571_TypeConversionsFree1__SetFloat(FCL_VALUE); #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else for (FCL_IDX=0; (FCL_IDX)<(2); (FCL_IDX)++) { if (FCL_MSBFIRST) { FCL_VAL = FCD_02571_TypeConversionsFree1__GetInt(1 - FCL_IDX); } else { FCL_VAL = FCD_02571_TypeConversionsFree1__GetInt(FCL_IDX); } FCD_06651_eeprom1__Write(FCL_STARTADDRESS + FCL_IDX, FCL_VAL); } #endif } /*=----------------------------------------------------------------------=*\ Use :Reads a 16-bit int value starting from the specified address. :A 16-bit int will consume 2 bytes which will be 2 locations on an 8-bit device or 1 location on a 16-bit device. : :Parameters for macro ReadInt: : StartAddress : Initial EE location to start reading : MSBFirst : 0=LSB First, 1=MSB First : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_06651_eeprom1__ReadInt(MX_UINT16 FCL_STARTADDRESS, MX_BOOL FCL_MSBFIRST) { //Local variable definitions MX_UINT16 FCL_VAL; MX_UINT8 FCL_IDX; MX_UINT16 FCR_RETVAL; #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else FCR_RETVAL = FCD_06651_eeprom1__Read(FCL_STARTADDRESS); #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads a 32-bit float value starting from the specified address. :A 32-bit float will consume 4 bytes which will be 4 locations on an 8-bit device or 2 locations on a 16-bit device. : :Parameters for macro ReadFloat: : StartAddress : Initial EE location to start reading : MSBFirst : 0=LSB First, 1=MSB First : :Returns : MX_FLOAT \*=----------------------------------------------------------------------=*/ MX_FLOAT FCD_06651_eeprom1__ReadFloat(MX_UINT16 FCL_STARTADDRESS, MX_BOOL FCL_MSBFIRST) { //Local variable definitions MX_UINT16 FCL_VAL; MX_UINT8 FCL_IDX; MX_FLOAT FCR_RETVAL; #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else for (FCL_IDX=0; (FCL_IDX)<(2); (FCL_IDX)++) { FCL_VAL = FCD_06651_eeprom1__Read(FCL_STARTADDRESS + FCL_IDX); if (FCL_MSBFIRST) { FCD_02571_TypeConversionsFree1__SetInt(1 - FCL_IDX, FCL_VAL); } else { FCD_02571_TypeConversionsFree1__SetInt(FCL_IDX, FCL_VAL); } } #endif FCR_RETVAL = FCD_02571_TypeConversionsFree1__GetFloat(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Writes a 8-bit byte value to the specified address. :A 8-bit byte will consume 1 bytes which will be 1 locations on an 8-bit device or half a location on a 16-bit device. : :Parameters for macro WriteByte: : ByteAddress : Byte address, EEADDR on 8-bit device or EEADDR/2 on a 16-bit device : Value : Floating point value to write \*=----------------------------------------------------------------------=*/ void FCD_06651_eeprom1__WriteByte(MX_UINT16 FCL_BYTEADDRESS, MX_UINT8 FCL_VALUE) { //Local variable definitions MX_UINT16 FCL_VAL; MX_UINT8 FCL_IDX; #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else FCL_VAL = FCD_06651_eeprom1__Read((FCL_BYTEADDRESS >> 1)); if (FCL_BYTEADDRESS & 1) { // .Val = .Val & 0x00FF // .Val = .Val | (.Value << 8) FCL_VAL = FCL_VAL & 0x00FF; FCL_VAL = FCL_VAL | (FCL_VALUE << 8); } else { // .Val = .Val & 0xFF00 // .Val = .Val | .Value FCL_VAL = FCL_VAL & 0xFF00; FCL_VAL = FCL_VAL | FCL_VALUE; } FCD_06651_eeprom1__Write((FCL_BYTEADDRESS >> 1), FCL_VAL); #endif } /*=----------------------------------------------------------------------=*\ Use :Writes a 16-bit int value starting at the specified address. :A 16-bit int will consume 2 bytes which will be 2 locations on an 8-bit device or 1 location on a 16-bit device. : :Parameters for macro WriteInt: : StartAddress : Initial EE location to start reading : Value : Floating point value to write : MSBFirst : 0=LSB First, 1=MSB First \*=----------------------------------------------------------------------=*/ void FCD_06651_eeprom1__WriteInt(MX_UINT16 FCL_STARTADDRESS, MX_UINT16 FCL_VALUE, MX_BOOL FCL_MSBFIRST) { //Local variable definitions MX_UINT16 FCL_VAL; MX_UINT8 FCL_IDX; #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else FCD_06651_eeprom1__Write(FCL_STARTADDRESS, FCL_VALUE); #endif } /*=----------------------------------------------------------------------=*\ Use :Reads a string of data from the EE memory starting at the specified address. :8-bit EE memory stores a character into each memory location. :16-bit EE memory stores two characters into each memory location. : :Parameters for macro ReadString: : StartAddress : EE Address of the first character in the string : MaxChars : The maximum number of characters to try and read plus null termination : :Returns : MX_CHAR* \*=----------------------------------------------------------------------=*/ void FCD_06651_eeprom1__ReadString(MX_CHAR *FCR_RETVAL, MX_UINT16 FCRsz_RETVAL, MX_UINT16 FCL_STARTADDRESS, MX_UINT8 FCL_MAXCHARS) { //Local variable definitions MX_UINT8 FCL_IDX = (0x0); MX_UINT16 FCL_VAL; // .val = 0 FCL_VAL = 0; while (FCL_IDX < (FCL_MAXCHARS - 1)) { #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else if (FCL_IDX & 1) { // .val = .val >> 8 FCL_VAL = FCL_VAL >> 8; } else { FCL_VAL = FCD_06651_eeprom1__Read(FCL_STARTADDRESS + (FCL_IDX >> 1)); } #endif // .Return[.idx] = .val & 0xFF FCR_RETVAL[FCL_IDX] = FCL_VAL & 0xFF; if (FCR_RETVAL[FCL_IDX] == 0) { goto FCC_ReadString_A; // } else { } // .idx = .idx + 1 FCL_IDX = FCL_IDX + 1; } // .Return[.idx] = 0 FCR_RETVAL[FCL_IDX] = 0; FCC_ReadString_A: ; } /*=----------------------------------------------------------------------=*\ Use :Reads a packet of bits from the EEPROM :The number of bits read is 8 or 16, depending on the platform : :Parameters for macro Read: : Address : The address, in elements, to read the data from : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_06651_eeprom1__Read(MX_UINT16 FCL_ADDRESS) { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (0) //Code has been optimised out by the pre-processor #else FCR_RETVAL = FC_CAL_EE_Read(FCL_ADDRESS); #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads a 32-bit long value starting from the specified address. :A 32-bit long will consume 4 bytes which will be 4 locations on an 8-bit device or 2 locations on a 16-bit device. : :Parameters for macro ReadLong: : StartAddress : Initial EE location to start reading : MSBFirst : 0=LSB First, 1=MSB First : :Returns : MX_UINT32 \*=----------------------------------------------------------------------=*/ MX_UINT32 FCD_06651_eeprom1__ReadLong(MX_UINT16 FCL_STARTADDRESS, MX_BOOL FCL_MSBFIRST) { //Local variable definitions MX_UINT16 FCL_VAL; MX_UINT8 FCL_IDX; MX_UINT32 FCR_RETVAL; #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else for (FCL_IDX=0; (FCL_IDX)<(2); (FCL_IDX)++) { FCL_VAL = FCD_06651_eeprom1__Read(FCL_STARTADDRESS + FCL_IDX); if (FCL_MSBFIRST) { FCD_02571_TypeConversionsFree1__SetInt(1 - FCL_IDX, FCL_VAL); } else { FCD_02571_TypeConversionsFree1__SetInt(FCL_IDX, FCL_VAL); } } #endif FCR_RETVAL = FCD_02571_TypeConversionsFree1__GetLong(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Writes a string of data to the EE memory starting at the specified address. :8-bit EE memory stores a character into each memory location. :16-bit EE memory stores two characters into each memory location. : :Parameters for macro WriteString: : StartAddress : EE Address of the first character in the string : MaxChars : The maximum number of characters to try and read plus null termination : DataString[20] : MX_CHAR (by-ref) \*=----------------------------------------------------------------------=*/ void FCD_06651_eeprom1__WriteString(MX_UINT16 FCL_STARTADDRESS, MX_UINT8 FCL_MAXCHARS, MX_CHAR *FCL_DATASTRING, MX_UINT16 FCLsz_DATASTRING) { //Local variable definitions MX_UINT8 FCL_IDX = (0x0); MX_UINT16 FCL_VAL; // .val = 0 FCL_VAL = 0; while (FCL_IDX < (FCL_MAXCHARS - 1)) { #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else if (FCL_IDX & 1) { // .Val = .Val + (.DataString[.idx] << 8) FCL_VAL = FCL_VAL + (FCL_DATASTRING[FCL_IDX] << 8); FCD_06651_eeprom1__Write(FCL_STARTADDRESS + (FCL_IDX >> 1), FCL_VAL); } else { // .Val = .DataString[.idx] FCL_VAL = FCL_DATASTRING[FCL_IDX]; } #endif if (FCL_DATASTRING[FCL_IDX] == 0) { #if (1) // 16 == 16 if (FCL_IDX == 0) { FCD_06651_eeprom1__Write(FCL_STARTADDRESS + (FCL_IDX >> 1), FCL_VAL); // } else { } // #else //Code has been optimised out by the pre-processor #endif goto FCC_WriteString_A; // } else { } // .Idx = .Idx + 1 FCL_IDX = FCL_IDX + 1; } #if (1) // 16 == 16 if (FCL_IDX == 0) { FCD_06651_eeprom1__Write(FCL_STARTADDRESS + (FCL_IDX >> 1), 0); } else { FCD_06651_eeprom1__Write(FCL_STARTADDRESS + (FCL_IDX >> 1), FCL_VAL); } #else //Code has been optimised out by the pre-processor #endif FCC_WriteString_A: ; } /*=----------------------------------------------------------------------=*\ Use :Writes a packet of bits from the EEPROM :The number of bits written is 8 or 16, depending on the platform : :Parameters for macro Sim_Write: : Address : The address, in elements, to read the data from : Value : The 8 or 16 bit value to store in EEPROM \*=----------------------------------------------------------------------=*/ void FCD_06651_eeprom1__Sim_Write(MX_UINT16 FCL_ADDRESS, MX_UINT16 FCL_VALUE) { #if (0) //Code has been optimised out by the pre-processor // #else #endif } /*=----------------------------------------------------------------------=*\ Use :Writes a packet of bits from the EEPROM :The number of bits written is 8 or 16, depending on the platform : :Parameters for macro Write: : Address : The address, in elements, to write the data to : Value : The 8 or 16 bit value to store in EEPROM \*=----------------------------------------------------------------------=*/ void FCD_06651_eeprom1__Write(MX_UINT16 FCL_ADDRESS, MX_UINT16 FCL_VALUE) { #if (0) //Code has been optimised out by the pre-processor #else FC_CAL_EE_Write(FCL_ADDRESS, FCL_VALUE); #endif } /*=----------------------------------------------------------------------=*\ Use :Reads a 8-bit byte value starting from the specified address. :A 8-bit byte will consume 1 byte which will be 1 locations on an 8-bit device or half a location on a 16-bit device. : :Parameters for macro ReadByte: : ByteAddress : Byte address, EEADDR on 8-bit device or EEADDR/2 on a 16-bit device : MSBFirst : 0=LSB First, 1=MSB First : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_06651_eeprom1__ReadByte(MX_UINT16 FCL_BYTEADDRESS, MX_BOOL FCL_MSBFIRST) { //Local variable definitions MX_UINT16 FCL_VAL; MX_UINT8 FCR_RETVAL; #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else FCL_VAL = FCD_06651_eeprom1__Read((FCL_BYTEADDRESS >> 1)); if (FCL_BYTEADDRESS & 1) { // .Return = .Val >> 8 FCR_RETVAL = FCL_VAL >> 8; } else { // .Return = .Val & 0xFF FCR_RETVAL = FCL_VAL & 0xFF; } #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads a packet of bits from the EEPROM :The number of bits read is 8 or 16, depending on the platform : :Parameters for macro Sim_Read: : Address : The address, in elements, to read the data from : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_06651_eeprom1__Sim_Read(MX_UINT16 FCL_ADDRESS) { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (0) //Code has been optimised out by the pre-processor #else // .Return = 0xFFFF FCR_RETVAL = 0xFFFF; #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Writes a 32-bit long value starting at the specified address. :A 32-bit long will consume 4 bytes which will be 4 locations on an 8-bit device or 2 locations on a 16-bit device. : :Parameters for macro WriteLong: : StartAddress : Initial EE location to start reading : Value : Floating point value to write : MSBFirst : 0=LSB First, 1=MSB First \*=----------------------------------------------------------------------=*/ void FCD_06651_eeprom1__WriteLong(MX_UINT16 FCL_STARTADDRESS, MX_UINT32 FCL_VALUE, MX_BOOL FCL_MSBFIRST) { //Local variable definitions MX_UINT16 FCL_VAL; MX_UINT8 FCL_IDX; FCD_02571_TypeConversionsFree1__SetLong(FCL_VALUE); #if (0) // 16 == 8 //Code has been optimised out by the pre-processor #else for (FCL_IDX=0; (FCL_IDX)<(2); (FCL_IDX)++) { if (FCL_MSBFIRST) { FCL_VAL = FCD_02571_TypeConversionsFree1__GetInt(1 - FCL_IDX); } else { FCL_VAL = FCD_02571_TypeConversionsFree1__GetInt(FCL_IDX); } FCD_06651_eeprom1__Write(FCL_STARTADDRESS + FCL_IDX, FCL_VAL); } #endif } /*========================================================================*\ Use :cal_i2c1 :GUID: ed3a5141-43bb-43e0-86b0-2243fd1147ca :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\cal_i2c.fcpx :Version: 6.0 (0x200028) :Timestamp: 23\01\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Send text to the console : :Parameters for macro Prv_TextConsole: : str[20] : MX_CHAR (by-ref) : Colour : MX_UINT8 : AppendTimestamp : MX_UINT8 \*=----------------------------------------------------------------------=*/ void FCD_07da1_cal_i2c1__Prv_TextConsole(MX_CHAR *FCL_STR, MX_UINT16 FCLsz_STR, MX_UINT8 FCL_COLOUR, MX_UINT8 FCL_APPENDTIMESTAMP) { //Local variable definitions #define FCLsz_TSTR 20 MX_CHAR FCL_TSTR[FCLsz_TSTR]; #if (0) //Code has been optimised out by the pre-processor // #else #endif //Local variable definitions #undef FCLsz_TSTR } /*========================================================================*\ Use :AmbientLight1 :GUID: e08872a7-6962-4b61-bcca-71389f8ed8d7 :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\AmbientLight.fcpx :Version: 5.0 (0x100028) :Timestamp: 20\01\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Powers up and starts the continous measurement mode. :Delays in between measurements readings must be provided by the user, : :Parameters for macro ContinuousMeasurement: : Resolution : 0=1lx (120ms) / 1=0.5lx (120ms) / 2 = 4lx (16ms) \*=----------------------------------------------------------------------=*/ void FCD_0f391_AmbientLight1__ContinuousMeasurement(MX_UINT8 FCL_RESOLUTION) { FCD_0f391_AmbientLight1__PowerUp(); switch (FCL_RESOLUTION) { case 0: { FCD_0f391_AmbientLight1__WriteCommand(0x10); break; } case 1: { FCD_0f391_AmbientLight1__WriteCommand(0x11); break; } case 2: { FCD_0f391_AmbientLight1__WriteCommand(0x13); break; } // default: } } /*=----------------------------------------------------------------------=*\ Use :Power Up the Device Ready for Measurement Command \*=----------------------------------------------------------------------=*/ void FCD_0f391_AmbientLight1__PowerUp() { FCD_0f391_AmbientLight1__WriteCommand(0x01); } /*=----------------------------------------------------------------------=*\ Use :Powers up and starts a single measurement before returning to power down mode. :Waits for the measurement to be ready and returns the value. : :Parameters for macro OneTimeMeasurement: : Resolution : 0=1lx (120ms) / 1=0.5lx (120ms) / 2 = 4lx (16ms) : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_0f391_AmbientLight1__OneTimeMeasurement(MX_UINT8 FCL_RESOLUTION) { //Local variable definitions MX_UINT16 FCR_RETVAL; FCD_0f391_AmbientLight1__PowerUp(); switch (FCL_RESOLUTION) { case 0: { FCD_0f391_AmbientLight1__WriteCommand(0x20); FCI_DELAYBYTE_MS(120); break; } case 1: { FCD_0f391_AmbientLight1__WriteCommand(0x21); FCI_DELAYBYTE_MS(120); break; } case 2: { FCD_0f391_AmbientLight1__WriteCommand(0x23); FCI_DELAYBYTE_MS(16); break; } // default: } FCR_RETVAL = FCD_0f391_AmbientLight1__ReadMeasurement(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Power Down the Device \*=----------------------------------------------------------------------=*/ void FCD_0f391_AmbientLight1__PowerDown() { FCD_0f391_AmbientLight1__WriteCommand(0x00); } /*=----------------------------------------------------------------------=*\ Use :Adjusts the measurement result to counteract influence of the optical window. : :Parameters for macro ChangeMeasurementTime: : Sensitvity : Range: 31-254 / Default: 69 \*=----------------------------------------------------------------------=*/ void FCD_0f391_AmbientLight1__ChangeMeasurementTime(MX_UINT8 FCL_SENSITVITY) { if (FCL_SENSITVITY < 31) { // .Sensitvity = 31 FCL_SENSITVITY = 31; // } else { } if (FCL_SENSITVITY > 254) { // .Sensitvity = 254 FCL_SENSITVITY = 254; // } else { } FCD_0f391_AmbientLight1__WriteCommand(0x40 | (FCL_SENSITVITY >> 5)); FCD_0f391_AmbientLight1__WriteCommand(0x60 | (FCL_SENSITVITY & 0x1F)); } /*=----------------------------------------------------------------------=*\ Use :Writes a command to the Light Sensor : :Parameters for macro WriteCommand: : OpCode : MX_UINT8 \*=----------------------------------------------------------------------=*/ void FCD_0f391_AmbientLight1__WriteCommand(MX_UINT8 FCL_OPCODE) { //Local variable definitions #define FCLsz_DATA 1 MX_UINT8 FCL_DATA[FCLsz_DATA]; // .Data[0] = .OpCode FCL_DATA[0] = FCL_OPCODE; FC_CAL_I2C_Transaction_Write_1(FCL_DATA, 1, 1); //Local variable definitions #undef FCLsz_DATA } /*=----------------------------------------------------------------------=*\ Use :Reads data from the Light Sensor as a 16-bit value. : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_0f391_AmbientLight1__ReadMeasurement() { //Local variable definitions #define FCLsz_DATA 2 MX_UINT8 FCL_DATA[FCLsz_DATA]; MX_UINT16 FCR_RETVAL; // .Data[0] = 0 // .Data[1] = 0 FCL_DATA[0] = 0; FCL_DATA[1] = 0; FC_CAL_I2C_Transaction_Read_1(FCL_DATA, 2, 2); // .Return = (.Data[0] << 8) | .Data[1] FCR_RETVAL = (FCL_DATA[0] << 8) | FCL_DATA[1]; return (FCR_RETVAL); //Local variable definitions #undef FCLsz_DATA } /*=----------------------------------------------------------------------=*\ Use :Resets the device measurement register, :Must be in the powered up state to do this. \*=----------------------------------------------------------------------=*/ void FCD_0f391_AmbientLight1__ResetMeasurement() { FCD_0f391_AmbientLight1__WriteCommand(0x07); } /*=----------------------------------------------------------------------=*\ Use :Stes up the I2C bus and initialises the termperature sensor ready for use. \*=----------------------------------------------------------------------=*/ void FCD_0f391_AmbientLight1__Initialise() { //Local variable definitions MX_UINT8 FCL_TEMP; MX_UINT16 FCL_PROM; // DVIPin = 0 SET_PORT_PIN(B, 0, 0); FC_CAL_I2C_Master_Init_1(); FC_CAL_I2C_Transaction_Init_1(35); FCI_DELAYBYTE_MS(1); // DVIPin = 1 SET_PORT_PIN(B, 0, 1); FCI_DELAYBYTE_MS(1); } /*========================================================================*\ Use :adc_base :GUID: 7aad74d6-b24e-4dab-91eb-5d72a973f12d :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\adc_base.fcpx :Version: 6.0 (0x100328) :Timestamp: 06\03\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a byte average sample over time :Call Enable() before this : :Parameters for macro RawAverageByte: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f42_adc_base__RawAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Local variable definitions MX_UINT16 FCL_AVERAGE = (0x0); MX_UINT8 FCL_COUNT = (0x0); MX_UINT8 FCR_RETVAL; if (FCL_DELAYUS > 0) { while (FCL_COUNT < FCL_NUMSAMPLES) { FC_ADC_Enable_2(35, 3, 0, FCL_DELAYUS); // .average = .average + cal_adc :: Sample (cal_adc :: Sample_Byte) // .count = .count + 1 FCL_AVERAGE = FCL_AVERAGE + FC_ADC_Sample_2(0); FCL_COUNT = FCL_COUNT + 1; } } else { while (FCL_COUNT < FCL_NUMSAMPLES) { FC_ADC_Enable_2(35, 3, 0, 40); // .average = .average + cal_adc :: Sample (cal_adc :: Sample_Byte) // .count = .count + 1 FCL_AVERAGE = FCL_AVERAGE + FC_ADC_Sample_2(0); FCL_COUNT = FCL_COUNT + 1; } } // .Return = .average / .count FCR_RETVAL = FCL_AVERAGE / FCL_COUNT; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the ADC as a direct voltage and returns as a string : :Returns : MX_CHAR* \*=----------------------------------------------------------------------=*/ void FCD_08f42_adc_base__GetString(MX_CHAR *FCR_RETVAL, MX_UINT16 FCRsz_RETVAL) { //Local variable definitions MX_FLOAT FCL_SAMPLE; FCL_SAMPLE = FCD_08f42_adc_base__GetVoltage(); // .Return = FloatToString$ (.sample) FCI_FLOAT_TO_STRING(FCL_SAMPLE, FCV_PRECISION, FCR_RETVAL, FCRsz_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Function call to read the ADC as a byte average sample over time : :Parameters for macro GetAverageByte: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f42_adc_base__GetAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Local variable definitions MX_UINT8 FCR_RETVAL; FCR_RETVAL = FCD_08f42_adc_base__RawAverageByte(FCL_NUMSAMPLES, FCL_DELAYUS); FC_ADC_Disable_2(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a full width average sample over time :Call Enable() before this : :Parameters for macro RawAverageInt: : NumSamples : MX_UINT8 : DelayUs : MX_UINT8 : :Returns : MX_SINT16 \*=----------------------------------------------------------------------=*/ MX_SINT16 FCD_08f42_adc_base__RawAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Local variable definitions MX_UINT32 FCL_AVERAGE = (0x0); MX_UINT8 FCL_COUNT = (0x0); MX_SINT16 FCR_RETVAL; if (FCL_DELAYUS > 0) { while (FCL_COUNT < FCL_NUMSAMPLES) { FC_ADC_Enable_2(35, 3, 0, FCL_DELAYUS); // .average = .average + cal_adc :: Sample (cal_adc :: Sample_Full) // .count = .count + 1 FCL_AVERAGE = FCL_AVERAGE + FC_ADC_Sample_2(1); FCL_COUNT = FCL_COUNT + 1; } } else { while (FCL_COUNT < FCL_NUMSAMPLES) { FC_ADC_Enable_2(35, 3, 0, 40); // .average = .average + cal_adc :: Sample (cal_adc :: Sample_Full) // .count = .count + 1 FCL_AVERAGE = FCL_AVERAGE + FC_ADC_Sample_2(1); FCL_COUNT = FCL_COUNT + 1; } } // .Return = .average / .count FCR_RETVAL = FCL_AVERAGE / FCL_COUNT; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Function call to read the ADC as a full width average sample over time : :Parameters for macro GetAverageInt: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f42_adc_base__GetAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Local variable definitions MX_UINT16 FCR_RETVAL; FCR_RETVAL = FCD_08f42_adc_base__RawAverageInt(FCL_NUMSAMPLES, FCL_DELAYUS); FC_ADC_Disable_2(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the ADC as a direct voltage : :Returns : MX_FLOAT \*=----------------------------------------------------------------------=*/ MX_FLOAT FCD_08f42_adc_base__GetVoltage() { //Local variable definitions MX_UINT16 FCL_SAMPLE; MX_FLOAT FCR_RETVAL; FC_ADC_Enable_2(35, 3, 0, 40); FCL_SAMPLE = FC_ADC_Sample_2(1); // .Return = .sample * bitmul FCR_RETVAL = flt_mul(flt_fromi(FCL_SAMPLE), 0.001221); FC_ADC_Disable_2(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Blocking call to read the ADC at full bit depth : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f42_adc_base__GetInt() { //Local variable definitions MX_UINT16 FCR_RETVAL; FC_ADC_Enable_2(35, 3, 0, 40); FCR_RETVAL = FC_ADC_Sample_2(1); FC_ADC_Disable_2(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Blocking call to read the ADC as a byte : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f42_adc_base__GetByte() { //Local variable definitions MX_UINT8 FCR_RETVAL; FC_ADC_Enable_2(35, 3, 0, 40); FCR_RETVAL = FC_ADC_Sample_2(0); FC_ADC_Disable_2(); return (FCR_RETVAL); } /*========================================================================*\ Use :IsSim1 :GUID: 5f7b77e5-e979-4010-93f1-e6d98f83bd71 :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\IsSim.fcpx :Version: 5.0 (0x100028) :Timestamp: 20\01\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Returns 0 if running on an embedded target or 1 if running in simulation runtime. : :Returns : MX_BOOL \*=----------------------------------------------------------------------=*/ MX_BOOL FCD_0b4c1_IsSim1__Check() { //Local variable definitions MX_BOOL FCR_RETVAL; // .Return = Sim FCR_RETVAL = 0; return (FCR_RETVAL); } /*========================================================================*\ Use :adc_base1 :GUID: 7aad74d6-b24e-4dab-91eb-5d72a973f12d :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\adc_base.fcpx :Version: 6.0 (0x100328) :Timestamp: 06\03\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a byte average sample over time :Call Enable() before this : :Parameters for macro RawAverageByte: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f41_adc_base1__RawAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Local variable definitions MX_UINT16 FCL_AVERAGE = (0x0); MX_UINT8 FCL_COUNT = (0x0); MX_UINT8 FCR_RETVAL; if (FCL_DELAYUS > 0) { while (FCL_COUNT < FCL_NUMSAMPLES) { FC_ADC_Enable_1(37, 0, 0, FCL_DELAYUS); // .average = .average + cal_adc :: Sample (cal_adc :: Sample_Byte) // .count = .count + 1 FCL_AVERAGE = FCL_AVERAGE + FC_ADC_Sample_1(0); FCL_COUNT = FCL_COUNT + 1; } } else { while (FCL_COUNT < FCL_NUMSAMPLES) { FC_ADC_Enable_1(37, 0, 0, 200); // .average = .average + cal_adc :: Sample (cal_adc :: Sample_Byte) // .count = .count + 1 FCL_AVERAGE = FCL_AVERAGE + FC_ADC_Sample_1(0); FCL_COUNT = FCL_COUNT + 1; } } // .Return = .average / .count FCR_RETVAL = FCL_AVERAGE / FCL_COUNT; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the ADC as a direct voltage and returns as a string : :Returns : MX_CHAR* \*=----------------------------------------------------------------------=*/ void FCD_08f41_adc_base1__GetString(MX_CHAR *FCR_RETVAL, MX_UINT16 FCRsz_RETVAL) { //Local variable definitions MX_FLOAT FCL_SAMPLE; FCL_SAMPLE = FCD_08f41_adc_base1__GetVoltage(); // .Return = FloatToString$ (.sample) FCI_FLOAT_TO_STRING(FCL_SAMPLE, FCV_PRECISION, FCR_RETVAL, FCRsz_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Function call to read the ADC as a byte average sample over time : :Parameters for macro GetAverageByte: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f41_adc_base1__GetAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Local variable definitions MX_UINT8 FCR_RETVAL; FCR_RETVAL = FCD_08f41_adc_base1__RawAverageByte(FCL_NUMSAMPLES, FCL_DELAYUS); FC_ADC_Disable_1(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a full width average sample over time :Call Enable() before this : :Parameters for macro RawAverageInt: : NumSamples : MX_UINT8 : DelayUs : MX_UINT8 : :Returns : MX_SINT16 \*=----------------------------------------------------------------------=*/ MX_SINT16 FCD_08f41_adc_base1__RawAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Local variable definitions MX_UINT32 FCL_AVERAGE = (0x0); MX_UINT8 FCL_COUNT = (0x0); MX_SINT16 FCR_RETVAL; if (FCL_DELAYUS > 0) { while (FCL_COUNT < FCL_NUMSAMPLES) { FC_ADC_Enable_1(37, 0, 0, FCL_DELAYUS); // .average = .average + cal_adc :: Sample (cal_adc :: Sample_Full) // .count = .count + 1 FCL_AVERAGE = FCL_AVERAGE + FC_ADC_Sample_1(1); FCL_COUNT = FCL_COUNT + 1; } } else { while (FCL_COUNT < FCL_NUMSAMPLES) { FC_ADC_Enable_1(37, 0, 0, 200); // .average = .average + cal_adc :: Sample (cal_adc :: Sample_Full) // .count = .count + 1 FCL_AVERAGE = FCL_AVERAGE + FC_ADC_Sample_1(1); FCL_COUNT = FCL_COUNT + 1; } } // .Return = .average / .count FCR_RETVAL = FCL_AVERAGE / FCL_COUNT; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Function call to read the ADC as a full width average sample over time : :Parameters for macro GetAverageInt: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f41_adc_base1__GetAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Local variable definitions MX_UINT16 FCR_RETVAL; FCR_RETVAL = FCD_08f41_adc_base1__RawAverageInt(FCL_NUMSAMPLES, FCL_DELAYUS); FC_ADC_Disable_1(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the ADC as a direct voltage : :Returns : MX_FLOAT \*=----------------------------------------------------------------------=*/ MX_FLOAT FCD_08f41_adc_base1__GetVoltage() { //Local variable definitions MX_UINT16 FCL_SAMPLE; MX_FLOAT FCR_RETVAL; FC_ADC_Enable_1(37, 0, 0, 200); FCL_SAMPLE = FC_ADC_Sample_1(1); // .Return = .sample * bitmul FCR_RETVAL = flt_mul(flt_fromi(FCL_SAMPLE), 0.001343); FC_ADC_Disable_1(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Blocking call to read the ADC at full bit depth : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f41_adc_base1__GetInt() { //Local variable definitions MX_UINT16 FCR_RETVAL; FC_ADC_Enable_1(37, 0, 0, 200); FCR_RETVAL = FC_ADC_Sample_1(1); FC_ADC_Disable_1(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Blocking call to read the ADC as a byte : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f41_adc_base1__GetByte() { //Local variable definitions MX_UINT8 FCR_RETVAL; FC_ADC_Enable_1(37, 0, 0, 200); FCR_RETVAL = FC_ADC_Sample_1(0); FC_ADC_Disable_1(); return (FCR_RETVAL); } /*========================================================================*\ Use :ACS7xx_Current_Sensor1 :GUID: aa85a268-ba47-4a33-bdad-04f51b716cdf :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\ACS712_Current_Sensor.fcpx :Version: 6.0 (0x100028) :Timestamp: 20\01\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Returns : MX_FLOAT \*=----------------------------------------------------------------------=*/ MX_FLOAT FCD_0f961_ACS7xx_Current_Sensor1__CalculateAverageVoltage() { //Local variable definitions MX_FLOAT FCL_VOLTAGE = (0.0); MX_FLOAT FCL_AVERAGEVOLTAGE = (0.0); MX_FLOAT FCR_RETVAL; for (FCLV_LOOP10=0; (FCLV_LOOP10)<(60); (FCLV_LOOP10)++) { FCL_VOLTAGE = FCD_08f41_adc_base1__GetVoltage(); // .Voltage = fround (.Voltage,2) // .AverageVoltage = .AverageVoltage + .Voltage FCL_VOLTAGE = fround(FCL_VOLTAGE, 2); FCL_AVERAGEVOLTAGE = flt_add(FCL_AVERAGEVOLTAGE, FCL_VOLTAGE); } // .Return = .AverageVoltage / 60.0 FCR_RETVAL = flt_div(FCL_AVERAGEVOLTAGE, 60.0); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Current reading in amps : :Returns : MX_FLOAT \*=----------------------------------------------------------------------=*/ MX_FLOAT FCD_0f961_ACS7xx_Current_Sensor1__Current() { //Local variable definitions MX_FLOAT FCL_CURRENT = (0.0); MX_FLOAT FCR_RETVAL; FCV_0f961_ACS7xx_Current_Sensor1__ISSIM = FCD_0b4c1_IsSim1__Check(); if (FCV_0f961_ACS7xx_Current_Sensor1__ISSIM) { // .Current=SensorLibraryComponent1::GetValue(0) // .Current = ((.Current * (Sensitivity / 10000.0)) + OffsetVoltage) FCL_CURRENT = (flt_add((flt_mul(FCL_CURRENT, (flt_div(990, 10000.0)))), 0.908500)); } else { FCL_CURRENT = FCD_0f961_ACS7xx_Current_Sensor1__CalculateAverageVoltage(); // .Current = .Current - (5.0 / VDD * OffsetVoltage - OffsetVoltage) FCL_CURRENT = flt_sub(FCL_CURRENT, (flt_sub(flt_mul(flt_div(5.0, 5.500000), 0.908500), 0.908500))); } // .Return = (.Current - OffsetVoltage) / ((FLOAT Sensitivity) / 10000.0) + OffsetCurrentAdjust FCR_RETVAL = flt_add(flt_div((flt_sub(FCL_CURRENT, 0.908500)), (flt_div((990), 10000.0))), 0.000000); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the Voltage of the ADC pin for diagnostic purposes. :With no current flowing through the sensor, the voltage reading should be 2.50V. If that is out, then enter precise VDD within properties : :Returns : MX_FLOAT \*=----------------------------------------------------------------------=*/ MX_FLOAT FCD_0f961_ACS7xx_Current_Sensor1__VoltgeADC() { //Local variable definitions MX_FLOAT FCL_VOLTAGE = (0.0); MX_FLOAT FCR_RETVAL; FCV_0f961_ACS7xx_Current_Sensor1__ISSIM = FCD_0b4c1_IsSim1__Check(); if (FCV_0f961_ACS7xx_Current_Sensor1__ISSIM) { // .Voltage=SensorLibraryComponent1::GetValue(0) // .Voltage = (Sensitivity / 10000.0) * .Voltage + OffsetVoltage FCL_VOLTAGE = flt_add(flt_mul((flt_div(990, 10000.0)), FCL_VOLTAGE), 0.908500); } else { FCL_VOLTAGE = FCD_0f961_ACS7xx_Current_Sensor1__CalculateAverageVoltage(); } // .Return = .Voltage FCR_RETVAL = FCL_VOLTAGE; return (FCR_RETVAL); } /*========================================================================*\ Use :cal_spi :GUID: c67171df-0ad6-4b11-8361-cfe14b072847 :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\cal_spi.fcpx :Version: 7.0 (0x200128) :Timestamp: 08\03\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Outputs a low signal to the chip select pin to select the remote slave device. \*=----------------------------------------------------------------------=*/ void FCD_01532_cal_spi__Master_Enable_CS() { //Local variable definitions #define FCLsz_STR 20 MX_CHAR FCL_STR[FCLsz_STR]; #if (1) #if (1) // 0 == 0 #if (1) #if (0) //Code has been optimised out by the pre-processor // #else #endif // SS = CSPolarity SET_PORT_PIN(A, 4, 0); // #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif //Local variable definitions #undef FCLsz_STR } /*=----------------------------------------------------------------------=*\ Use :Send text to the SPI console. :Exposed as part of the CAL_SPI component to allow none AutoCS pins and other. : :Parameters for macro Prv_TextConsole: : str[20] : MX_CHAR (by-ref) : Colour : 0=Default, 1=TX, 2=RX : AppendTimestamp : 0=Don't Append / 1=Do Append \*=----------------------------------------------------------------------=*/ void FCD_01532_cal_spi__Prv_TextConsole(MX_CHAR *FCL_STR, MX_UINT16 FCLsz_STR, MX_UINT8 FCL_COLOUR, MX_UINT8 FCL_APPENDTIMESTAMP) { //Local variable definitions #define FCLsz_TSTR 20 MX_CHAR FCL_TSTR[FCLsz_TSTR]; #if (0) //Code has been optimised out by the pre-processor // #else #endif //Local variable definitions #undef FCLsz_TSTR } /*=----------------------------------------------------------------------=*\ Use :Parameters for macro Prv_SimShowWaveform: : RXData : MX_UINT8 : TXData : MX_UINT16 \*=----------------------------------------------------------------------=*/ void FCD_01532_cal_spi__Prv_SimShowWaveform(MX_UINT8 FCL_RXDATA, MX_UINT16 FCL_TXDATA) { #if (1) for (FCLV_LOOP9=0; (FCLV_LOOP9)<(8); (FCLV_LOOP9)++) { #if (0) // (2 & 0x02) == 0 //Code has been optimised out by the pre-processor // #else #endif if (FCL_TXDATA & 0x80) { // MOSI = 1 SET_PORT_PIN(A, 21, 1); } else { // MOSI = 0 SET_PORT_PIN(A, 21, 0); } #if (1) // (2 & 0x04) == 0 if (FCL_RXDATA & 0x80) { // MISO = 1 /* Error: Syntax error */; } else { // MISO = 0 /* Error: Syntax error */; } // #else //Code has been optimised out by the pre-processor #endif FCI_DELAYBYTE_US(0); #if (1) // (2 & 0x02) == 2 #if (1) // (2 & 0x01) == 0 // CLK = 1 SET_PORT_PIN(A, 17, 1); #else //Code has been optimised out by the pre-processor #endif #else //Code has been optimised out by the pre-processor #endif #if (0) // (2 & 0x04) == 4 //Code has been optimised out by the pre-processor // #else #endif FCI_DELAYBYTE_US(0); #if (1) // (2 & 0x02) == 2 #if (1) // (2 & 0x01) == 0 // CLK = 0 SET_PORT_PIN(A, 17, 0); #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif // .TXData = .TXData << 1 // .RXData = .RXData << 1 FCL_TXDATA = FCL_TXDATA << 1; FCL_RXDATA = FCL_RXDATA << 1; } // #else //Code has been optimised out by the pre-processor #endif } /*=----------------------------------------------------------------------=*\ Use :Outputs a high signal to the chip select pin to deselect the remote slave device. \*=----------------------------------------------------------------------=*/ void FCD_01532_cal_spi__Master_Disable_CS() { //Local variable definitions #define FCLsz_STR 20 MX_CHAR FCL_STR[FCLsz_STR]; #if (1) #if (1) // 0 == 0 #if (1) #if (0) //Code has been optimised out by the pre-processor // #else #endif // SS = 1 - CSPolarity SET_PORT_PIN(A, 4, 1 - 0); // #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif //Local variable definitions #undef FCLsz_STR } /*========================================================================*\ Use :XPT2046 :GUID: ab872cc0-e6fe-4d30-a7cb-a1efc6ae87a6 :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\XPT2046.fcpx :Version: 7.0 (0x200028) :Timestamp: 20\01\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Samples the touch sensor IC for a single ADC read. : :Parameters for macro SampleTouch: : Control : Control Byte Value : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_06ae1_XPT2046__SampleTouch(MX_UINT8 FCL_CONTROL) { //Local variable definitions MX_UINT8 FCL_B1; MX_UINT8 FCL_B2; MX_UINT16 FCR_RETVAL; FCD_01532_cal_spi__Master_Enable_CS(); FC_CAL_SPI_Master_Byte_2(FCL_CONTROL); FCI_DELAYBYTE_US(1); FCL_B1 = FC_CAL_SPI_Master_Byte_2(0x00); FCL_B2 = FC_CAL_SPI_Master_Byte_2(0x00); FCD_01532_cal_spi__Master_Disable_CS(); // LibraryComponent1::FlashRx() // LibraryComponent1::FlashTx() // .Return = .b2 >> 4 // .Return = .Return | (.b1 << 4) FCR_RETVAL = FCL_B2 >> 4; FCR_RETVAL = FCR_RETVAL | (FCL_B1 << 4); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the touch controller and returns true if there is currently a touch in progress. :The touch coordinates can be read using the ReadCoord macro. :Return 0 = No Touch, 1 = Touch in progress : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_06ae1_XPT2046__SampleSensor() { //Local variable definitions MX_UINT8 FCL_CONTROL; MX_UINT8 FCR_RETVAL; // .control = 0x83 // .control = .control | (AnMode << 2) FCL_CONTROL = 0x83; FCL_CONTROL = FCL_CONTROL | (0 << 2); FCV_06ae1_XPT2046__PRESSURE = FCD_06ae1_XPT2046__SampleTouch(FCL_CONTROL | (3 << 4)); FCI_DELAYBYTE_US(100); FCV_06ae1_XPT2046__Y = FCD_06ae1_XPT2046__SampleTouch(FCL_CONTROL | (1 << 4)); FCI_DELAYBYTE_US(100); FCV_06ae1_XPT2046__X = FCD_06ae1_XPT2046__SampleTouch(FCL_CONTROL | (5 << 4)); FCI_DELAYBYTE_US(100); if (FCV_06ae1_XPT2046__PRESSURE > 0) { // .Return = 1 FCR_RETVAL = 1; } else { // .Return = 0 FCR_RETVAL = 0; } return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads a coordinate returned from the Sample Sensor macro. :Coordinate is scaled to the X/Y Pixel bounds specified. : :Parameters for macro ReadCoord: : Coordinate : 0 = X, 1 = Y, 2 = Pressure : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_06ae1_XPT2046__ReadCoord(MX_UINT8 FCL_COORDINATE) { //Local variable definitions MX_FLOAT FCL_FVAR; MX_UINT16 FCR_RETVAL; switch (FCL_COORDINATE) { case 1: { // .fvar = FLOAT Y / 2048.0 // .fvar = .fvar * Ypix FCL_FVAR = flt_div(flt_fromi(FCV_06ae1_XPT2046__Y), 2048.0); FCL_FVAR = flt_mul(FCL_FVAR, 480); // .Return = float2int (.fvar) FCR_RETVAL = flt_toi(FCL_FVAR); #if (0) //Code has been optimised out by the pre-processor // #else #endif break; } case 2: { // .Return = Pressure FCR_RETVAL = FCV_06ae1_XPT2046__PRESSURE; break; } default: { // .fvar = FLOAT X / 2048.0 // .fvar = .fvar * Xpix FCL_FVAR = flt_div(flt_fromi(FCV_06ae1_XPT2046__X), 2048.0); FCL_FVAR = flt_mul(FCL_FVAR, 320); // .Return = float2int (.fvar) FCR_RETVAL = flt_toi(FCL_FVAR); #if (0) //Code has been optimised out by the pre-processor // #else #endif } } return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Activates the SPI peripheral and claims control over the I/O pins. \*=----------------------------------------------------------------------=*/ void FCD_06ae1_XPT2046__Initialise() { FC_CAL_SPI_Master_Init_2(); } /*========================================================================*\ Use :cal_spi1 :GUID: c67171df-0ad6-4b11-8361-cfe14b072847 :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\cal_spi.fcpx :Version: 7.0 (0x200128) :Timestamp: 08\03\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Outputs a low signal to the chip select pin to select the remote slave device. \*=----------------------------------------------------------------------=*/ void FCD_01531_cal_spi1__Master_Enable_CS() { //Local variable definitions #define FCLsz_STR 20 MX_CHAR FCL_STR[FCLsz_STR]; #if (1) #if (1) // 0 == 0 #if (0) //Code has been optimised out by the pre-processor // #else #endif // #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif //Local variable definitions #undef FCLsz_STR } /*=----------------------------------------------------------------------=*\ Use :Send text to the SPI console. :Exposed as part of the CAL_SPI component to allow none AutoCS pins and other. : :Parameters for macro Prv_TextConsole: : str[20] : MX_CHAR (by-ref) : Colour : 0=Default, 1=TX, 2=RX : AppendTimestamp : 0=Don't Append / 1=Do Append \*=----------------------------------------------------------------------=*/ void FCD_01531_cal_spi1__Prv_TextConsole(MX_CHAR *FCL_STR, MX_UINT16 FCLsz_STR, MX_UINT8 FCL_COLOUR, MX_UINT8 FCL_APPENDTIMESTAMP) { //Local variable definitions #define FCLsz_TSTR 20 MX_CHAR FCL_TSTR[FCLsz_TSTR]; #if (0) //Code has been optimised out by the pre-processor // #else #endif //Local variable definitions #undef FCLsz_TSTR } /*=----------------------------------------------------------------------=*\ Use :Parameters for macro Prv_SimShowWaveform: : RXData : MX_UINT8 : TXData : MX_UINT16 \*=----------------------------------------------------------------------=*/ void FCD_01531_cal_spi1__Prv_SimShowWaveform(MX_UINT8 FCL_RXDATA, MX_UINT16 FCL_TXDATA) { #if (1) for (FCLV_LOOP9=0; (FCLV_LOOP9)<(8); (FCLV_LOOP9)++) { #if (0) // (7 & 0x02) == 0 //Code has been optimised out by the pre-processor // #else #endif if (FCL_TXDATA & 0x80) { // MOSI = 1 SET_PORT_PIN(A, 23, 1); } else { // MOSI = 0 SET_PORT_PIN(A, 23, 0); } #if (0) // (7 & 0x04) == 0 //Code has been optimised out by the pre-processor // #else #endif FCI_DELAYBYTE_US(1); #if (1) // (7 & 0x02) == 2 #if (0) // (7 & 0x01) == 0 //Code has been optimised out by the pre-processor #else // CLK = 0 SET_PORT_PIN(A, 18, 0); #endif #else //Code has been optimised out by the pre-processor #endif #if (1) // (7 & 0x04) == 4 if (FCL_RXDATA & 0x80) { // MISO = 1 SET_PORT_PIN(A, 22, 1); } else { // MISO = 0 SET_PORT_PIN(A, 22, 0); } // #else //Code has been optimised out by the pre-processor #endif FCI_DELAYBYTE_US(1); #if (1) // (7 & 0x02) == 2 #if (0) // (7 & 0x01) == 0 //Code has been optimised out by the pre-processor #else // CLK = 1 SET_PORT_PIN(A, 18, 1); #endif // #else //Code has been optimised out by the pre-processor #endif // .TXData = .TXData << 1 // .RXData = .RXData << 1 FCL_TXDATA = FCL_TXDATA << 1; FCL_RXDATA = FCL_RXDATA << 1; } // #else //Code has been optimised out by the pre-processor #endif } /*=----------------------------------------------------------------------=*\ Use :Outputs a high signal to the chip select pin to deselect the remote slave device. \*=----------------------------------------------------------------------=*/ void FCD_01531_cal_spi1__Master_Disable_CS() { //Local variable definitions #define FCLsz_STR 20 MX_CHAR FCL_STR[FCLsz_STR]; #if (1) #if (1) // 0 == 0 #if (0) //Code has been optimised out by the pre-processor // #else #endif // #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif //Local variable definitions #undef FCLsz_STR } /*========================================================================*\ Use :WidthData :GUID: dfb4d07a-3d70-45d5-83ef-07e3c95d86ab :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\lut.fcpx :Version: 11.0 (0x100728) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Gets the number of individual data entries stored in the LUT. : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_00fb8_WidthData__GetLUTCount() { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (0) //Code has been optimised out by the pre-processor #else // .Return = 0 FCR_RETVAL = 0; #endif return (FCR_RETVAL); } /*========================================================================*\ Use :ASCIIData :GUID: dfb4d07a-3d70-45d5-83ef-07e3c95d86ab :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\lut.fcpx :Version: 11.0 (0x100728) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Gets the number of individual data entries stored in the LUT. : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_00fb7_ASCIIData__GetLUTCount() { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (0) //Code has been optimised out by the pre-processor #else // .Return = 0 FCR_RETVAL = 0; #endif return (FCR_RETVAL); } /*========================================================================*\ Use :gLCD_Font4 :GUID: 1b08885c-807e-4631-930e-a4fef06159dc :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\gLCD_Font.fcpx :Version: 7.0 (0x100028) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Adds up all the pixels widths before the selected character to get to the start of the pixel data : :Parameters for macro SumWidths: : Character : MX_UINT8 : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_09e54_gLCD_Font4__SumWidths(MX_UINT8 FCL_CHARACTER) { //Local variable definitions MX_UINT8 FCL_WIDTH; MX_UINT16 FCR_RETVAL; // .Return = 0 FCR_RETVAL = 0; #if (0) //Code has been optimised out by the pre-processor // #else #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets the width of the ASCII character font data : :Parameters for macro ReadWidth: : Character : ASCII position so A = 'A' : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e54_gLCD_Font4__ReadWidth(MX_UINT8 FCL_CHARACTER) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCL_PWIDTH; MX_UINT8 FCR_RETVAL; #if (0) //Code has been optimised out by the pre-processor #else // .Return = 0 FCR_RETVAL = 0; #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Collects a stat about the selected font : :Parameters for macro ReadFontStat: : Index : 0=SpaceColumns, 1=CharacterHeight : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e54_gLCD_Font4__ReadFontStat(MX_UINT8 FCL_INDEX) { //Local variable definitions MX_UINT8 FCR_RETVAL; if (FCL_INDEX == 1) { // .Return = PixelHeight FCR_RETVAL = 36; } else { // .Return = FontSpace FCR_RETVAL = 1; } return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets a single pixel column byte from the selected ASCII character font data. : :Parameters for macro ReadASCIILUT: : Character : ASCII position so A = 'A' : ByteIndex : Range: 0 to ((PixelWidth - 1) * BytesPerColumn) : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e54_gLCD_Font4__ReadASCIILUT(MX_UINT8 FCL_CHARACTER, MX_UINT8 FCL_BYTEINDEX) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCR_RETVAL; #if (0) //Code has been optimised out by the pre-processor #else // .Return = 0 FCR_RETVAL = 0; #endif return (FCR_RETVAL); } /*========================================================================*\ Use :WidthData :GUID: dfb4d07a-3d70-45d5-83ef-07e3c95d86ab :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\lut.fcpx :Version: 11.0 (0x100728) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Gets the number of individual data entries stored in the LUT. : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_00fb6_WidthData__GetLUTCount() { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (1) // .Return = NumVals FCR_RETVAL = 95; #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*========================================================================*\ Use :ASCIIData :GUID: dfb4d07a-3d70-45d5-83ef-07e3c95d86ab :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\lut.fcpx :Version: 11.0 (0x100728) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Gets the number of individual data entries stored in the LUT. : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_00fb5_ASCIIData__GetLUTCount() { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (1) // .Return = NumVals FCR_RETVAL = 1000; #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*========================================================================*\ Use :gLCD_Font3 :GUID: 1b08885c-807e-4631-930e-a4fef06159dc :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\gLCD_Font.fcpx :Version: 7.0 (0x100028) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Adds up all the pixels widths before the selected character to get to the start of the pixel data : :Parameters for macro SumWidths: : Character : MX_UINT8 : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_09e53_gLCD_Font3__SumWidths(MX_UINT8 FCL_CHARACTER) { //Local variable definitions MX_UINT8 FCL_WIDTH; MX_UINT16 FCR_RETVAL; // .Return = 0 FCR_RETVAL = 0; #if (1) #if (1) // 0 == 0 while (FCL_CHARACTER > 0) { // .Character = .Character - 1 FCL_CHARACTER = FCL_CHARACTER - 1; FCL_WIDTH = FCD_00fb6_WidthData__INTFIXEDLIST(FCL_CHARACTER); // .Return = .Return + .width FCR_RETVAL = FCR_RETVAL + FCL_WIDTH; } // .Return = .Return * BytesPerColumn FCR_RETVAL = FCR_RETVAL * 2; // #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets the width of the ASCII character font data : :Parameters for macro ReadWidth: : Character : ASCII position so A = 'A' : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e53_gLCD_Font3__ReadWidth(MX_UINT8 FCL_CHARACTER) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCL_PWIDTH; MX_UINT8 FCR_RETVAL; #if (1) #if (0) // 255 < 255 //Code has been optimised out by the pre-processor // #else #endif #if (0) //Code has been optimised out by the pre-processor #else if ((FCL_CHARACTER < 33) || (FCL_CHARACTER >= (33 + 95))) { if (FCL_CHARACTER == 32) { // .Return = SpaceWidth FCR_RETVAL = 4; } else { //Comment: //Out of range // .Return = 0 FCR_RETVAL = 0; } } else { // .Character = .Character - FirstChar FCL_CHARACTER = FCL_CHARACTER - 33; FCR_RETVAL = FCD_00fb6_WidthData__INTFIXEDLIST(FCL_CHARACTER); } #endif #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Collects a stat about the selected font : :Parameters for macro ReadFontStat: : Index : 0=SpaceColumns, 1=CharacterHeight : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e53_gLCD_Font3__ReadFontStat(MX_UINT8 FCL_INDEX) { //Local variable definitions MX_UINT8 FCR_RETVAL; if (FCL_INDEX == 1) { // .Return = PixelHeight FCR_RETVAL = 14; } else { // .Return = FontSpace FCR_RETVAL = 1; } return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets a single pixel column byte from the selected ASCII character font data. : :Parameters for macro ReadASCIILUT: : Character : ASCII position so A = 'A' : ByteIndex : Range: 0 to ((PixelWidth - 1) * BytesPerColumn) : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e53_gLCD_Font3__ReadASCIILUT(MX_UINT8 FCL_CHARACTER, MX_UINT8 FCL_BYTEINDEX) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCR_RETVAL; #if (1) #if (0) // 255 < 255 //Code has been optimised out by the pre-processor // #else #endif if ((FCL_CHARACTER < 33) || (FCL_CHARACTER >= (33 + 95))) { if (FCL_CHARACTER == 32) { // .Return = 0 FCR_RETVAL = 0; } else { //Comment: //Out of range // .Return = 0xAA FCR_RETVAL = 0xAA; } } else { // .Character = .Character - FirstChar FCL_CHARACTER = FCL_CHARACTER - 33; #if (0) // 0 == 1 //Code has been optimised out by the pre-processor #else if (FCL_CHARACTER == FCV_09e53_gLCD_Font3__OLDCHAR) { // .Position = oldposition FCL_POSITION = FCV_09e53_gLCD_Font3__OLDPOSITION; } else { FCL_POSITION = FCD_09e53_gLCD_Font3__SumWidths(FCL_CHARACTER); // oldposition = .Position // oldchar = .Character FCV_09e53_gLCD_Font3__OLDPOSITION = FCL_POSITION; FCV_09e53_gLCD_Font3__OLDCHAR = FCL_CHARACTER; } #endif // .Position = .Position + .ByteIndex FCL_POSITION = FCL_POSITION + FCL_BYTEINDEX; FCR_RETVAL = FCD_00fb5_ASCIIData__INTFIXEDLIST(FCL_POSITION); } #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*========================================================================*\ Use :WidthData :GUID: dfb4d07a-3d70-45d5-83ef-07e3c95d86ab :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\lut.fcpx :Version: 11.0 (0x100728) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Gets the number of individual data entries stored in the LUT. : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_00fb4_WidthData__GetLUTCount() { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (1) // .Return = NumVals FCR_RETVAL = 95; #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*========================================================================*\ Use :ASCIIData :GUID: dfb4d07a-3d70-45d5-83ef-07e3c95d86ab :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\lut.fcpx :Version: 11.0 (0x100728) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Gets the number of individual data entries stored in the LUT. : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_00fb3_ASCIIData__GetLUTCount() { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (1) // .Return = NumVals FCR_RETVAL = 1222; #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*========================================================================*\ Use :gLCD_Font2 :GUID: 1b08885c-807e-4631-930e-a4fef06159dc :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\gLCD_Font.fcpx :Version: 7.0 (0x100028) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Adds up all the pixels widths before the selected character to get to the start of the pixel data : :Parameters for macro SumWidths: : Character : MX_UINT8 : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_09e52_gLCD_Font2__SumWidths(MX_UINT8 FCL_CHARACTER) { //Local variable definitions MX_UINT8 FCL_WIDTH; MX_UINT16 FCR_RETVAL; // .Return = 0 FCR_RETVAL = 0; #if (1) #if (1) // 0 == 0 while (FCL_CHARACTER > 0) { // .Character = .Character - 1 FCL_CHARACTER = FCL_CHARACTER - 1; FCL_WIDTH = FCD_00fb4_WidthData__INTFIXEDLIST(FCL_CHARACTER); // .Return = .Return + .width FCR_RETVAL = FCR_RETVAL + FCL_WIDTH; } // .Return = .Return * BytesPerColumn FCR_RETVAL = FCR_RETVAL * 2; // #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets the width of the ASCII character font data : :Parameters for macro ReadWidth: : Character : ASCII position so A = 'A' : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e52_gLCD_Font2__ReadWidth(MX_UINT8 FCL_CHARACTER) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCL_PWIDTH; MX_UINT8 FCR_RETVAL; #if (1) #if (0) // 255 < 255 //Code has been optimised out by the pre-processor // #else #endif #if (0) //Code has been optimised out by the pre-processor #else if ((FCL_CHARACTER < 33) || (FCL_CHARACTER >= (33 + 95))) { if (FCL_CHARACTER == 32) { // .Return = SpaceWidth FCR_RETVAL = 4; } else { //Comment: //Out of range // .Return = 0 FCR_RETVAL = 0; } } else { // .Character = .Character - FirstChar FCL_CHARACTER = FCL_CHARACTER - 33; FCR_RETVAL = FCD_00fb4_WidthData__INTFIXEDLIST(FCL_CHARACTER); } #endif #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Collects a stat about the selected font : :Parameters for macro ReadFontStat: : Index : 0=SpaceColumns, 1=CharacterHeight : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e52_gLCD_Font2__ReadFontStat(MX_UINT8 FCL_INDEX) { //Local variable definitions MX_UINT8 FCR_RETVAL; if (FCL_INDEX == 1) { // .Return = PixelHeight FCR_RETVAL = 14; } else { // .Return = FontSpace FCR_RETVAL = 1; } return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets a single pixel column byte from the selected ASCII character font data. : :Parameters for macro ReadASCIILUT: : Character : ASCII position so A = 'A' : ByteIndex : Range: 0 to ((PixelWidth - 1) * BytesPerColumn) : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e52_gLCD_Font2__ReadASCIILUT(MX_UINT8 FCL_CHARACTER, MX_UINT8 FCL_BYTEINDEX) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCR_RETVAL; #if (1) #if (0) // 255 < 255 //Code has been optimised out by the pre-processor // #else #endif if ((FCL_CHARACTER < 33) || (FCL_CHARACTER >= (33 + 95))) { if (FCL_CHARACTER == 32) { // .Return = 0 FCR_RETVAL = 0; } else { //Comment: //Out of range // .Return = 0xAA FCR_RETVAL = 0xAA; } } else { // .Character = .Character - FirstChar FCL_CHARACTER = FCL_CHARACTER - 33; #if (0) // 0 == 1 //Code has been optimised out by the pre-processor #else if (FCL_CHARACTER == FCV_09e52_gLCD_Font2__OLDCHAR) { // .Position = oldposition FCL_POSITION = FCV_09e52_gLCD_Font2__OLDPOSITION; } else { FCL_POSITION = FCD_09e52_gLCD_Font2__SumWidths(FCL_CHARACTER); // oldposition = .Position // oldchar = .Character FCV_09e52_gLCD_Font2__OLDPOSITION = FCL_POSITION; FCV_09e52_gLCD_Font2__OLDCHAR = FCL_CHARACTER; } #endif // .Position = .Position + .ByteIndex FCL_POSITION = FCL_POSITION + FCL_BYTEINDEX; FCR_RETVAL = FCD_00fb3_ASCIIData__INTFIXEDLIST(FCL_POSITION); } #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*========================================================================*\ Use :WidthData :GUID: dfb4d07a-3d70-45d5-83ef-07e3c95d86ab :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\lut.fcpx :Version: 11.0 (0x100728) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Gets the number of individual data entries stored in the LUT. : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_00fb2_WidthData__GetLUTCount() { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (1) // .Return = NumVals FCR_RETVAL = 95; #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*========================================================================*\ Use :ASCIIData :GUID: dfb4d07a-3d70-45d5-83ef-07e3c95d86ab :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\lut.fcpx :Version: 11.0 (0x100728) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Gets the number of individual data entries stored in the LUT. : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_00fb1_ASCIIData__GetLUTCount() { //Local variable definitions MX_UINT16 FCR_RETVAL; #if (1) // .Return = NumVals FCR_RETVAL = 1098; #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*========================================================================*\ Use :gLCD_Font1 :GUID: 1b08885c-807e-4631-930e-a4fef06159dc :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\gLCD_Font.fcpx :Version: 7.0 (0x100028) :Timestamp: 07\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Adds up all the pixels widths before the selected character to get to the start of the pixel data : :Parameters for macro SumWidths: : Character : MX_UINT8 : :Returns : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_09e51_gLCD_Font1__SumWidths(MX_UINT8 FCL_CHARACTER) { //Local variable definitions MX_UINT8 FCL_WIDTH; MX_UINT16 FCR_RETVAL; // .Return = 0 FCR_RETVAL = 0; #if (1) #if (1) // 0 == 0 while (FCL_CHARACTER > 0) { // .Character = .Character - 1 FCL_CHARACTER = FCL_CHARACTER - 1; FCL_WIDTH = FCD_00fb2_WidthData__INTFIXEDLIST(FCL_CHARACTER); // .Return = .Return + .width FCR_RETVAL = FCR_RETVAL + FCL_WIDTH; } // .Return = .Return * BytesPerColumn FCR_RETVAL = FCR_RETVAL * 2; // #else //Code has been optimised out by the pre-processor #endif // #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets the width of the ASCII character font data : :Parameters for macro ReadWidth: : Character : ASCII position so A = 'A' : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e51_gLCD_Font1__ReadWidth(MX_UINT8 FCL_CHARACTER) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCL_PWIDTH; MX_UINT8 FCR_RETVAL; #if (1) #if (0) // 255 < 255 //Code has been optimised out by the pre-processor // #else #endif #if (0) //Code has been optimised out by the pre-processor #else if ((FCL_CHARACTER < 33) || (FCL_CHARACTER >= (33 + 95))) { if (FCL_CHARACTER == 32) { // .Return = SpaceWidth FCR_RETVAL = 4; } else { //Comment: //Out of range // .Return = 0 FCR_RETVAL = 0; } } else { // .Character = .Character - FirstChar FCL_CHARACTER = FCL_CHARACTER - 33; FCR_RETVAL = FCD_00fb2_WidthData__INTFIXEDLIST(FCL_CHARACTER); } #endif #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Collects a stat about the selected font : :Parameters for macro ReadFontStat: : Index : 0=SpaceColumns, 1=CharacterHeight : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e51_gLCD_Font1__ReadFontStat(MX_UINT8 FCL_INDEX) { //Local variable definitions MX_UINT8 FCR_RETVAL; if (FCL_INDEX == 1) { // .Return = PixelHeight FCR_RETVAL = 14; } else { // .Return = FontSpace FCR_RETVAL = 1; } return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets a single pixel column byte from the selected ASCII character font data. : :Parameters for macro ReadASCIILUT: : Character : ASCII position so A = 'A' : ByteIndex : Range: 0 to ((PixelWidth - 1) * BytesPerColumn) : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_09e51_gLCD_Font1__ReadASCIILUT(MX_UINT8 FCL_CHARACTER, MX_UINT8 FCL_BYTEINDEX) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCR_RETVAL; #if (1) #if (0) // 255 < 255 //Code has been optimised out by the pre-processor // #else #endif if ((FCL_CHARACTER < 33) || (FCL_CHARACTER >= (33 + 95))) { if (FCL_CHARACTER == 32) { // .Return = 0 FCR_RETVAL = 0; } else { //Comment: //Out of range // .Return = 0xAA FCR_RETVAL = 0xAA; } } else { // .Character = .Character - FirstChar FCL_CHARACTER = FCL_CHARACTER - 33; #if (0) // 0 == 1 //Code has been optimised out by the pre-processor #else if (FCL_CHARACTER == FCV_09e51_gLCD_Font1__OLDCHAR) { // .Position = oldposition FCL_POSITION = FCV_09e51_gLCD_Font1__OLDPOSITION; } else { FCL_POSITION = FCD_09e51_gLCD_Font1__SumWidths(FCL_CHARACTER); // oldposition = .Position // oldchar = .Character FCV_09e51_gLCD_Font1__OLDPOSITION = FCL_POSITION; FCV_09e51_gLCD_Font1__OLDCHAR = FCL_CHARACTER; } #endif // .Position = .Position + .ByteIndex FCL_POSITION = FCL_POSITION + FCL_BYTEINDEX; FCR_RETVAL = FCD_00fb1_ASCIIData__INTFIXEDLIST(FCL_POSITION); } #else //Code has been optimised out by the pre-processor #endif return (FCR_RETVAL); } /*========================================================================*\ Use :Base_GLCD :GUID: 4384cba9-0bea-4359-8c5b-dcd046aa7778 :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\Base_GLCD.fcpx :Version: 24.0 (0x300028) :Timestamp: 19\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the number of pixel columns used in the selected font : :Parameters for macro ReadFontWidth: : Font : Font selection range: 0 to (NumFonts - 1) : Character : ASCII character to get the pixel width e.g. 'A' or 65 : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_0ba71_Base_GLCD__ReadFontWidth(MX_UINT8 FCL_FONT, MX_UINT8 FCL_CHARACTER) { //Local variable definitions MX_UINT8 FCR_RETVAL; // .Return = 0 FCR_RETVAL = 0; if (FCL_FONT >= 3) { // .Font = 0 FCL_FONT = 0; // } else { } if (FCL_FONT == 0) { FCR_RETVAL = FCD_09e51_gLCD_Font1__ReadWidth(FCL_CHARACTER); // } else { } #if (1) // 3 > 1 if (FCL_FONT == 1) { FCR_RETVAL = FCD_09e52_gLCD_Font2__ReadWidth(FCL_CHARACTER); // } else { } // #else //Code has been optimised out by the pre-processor #endif #if (1) // 3 > 2 if (FCL_FONT == 2) { FCR_RETVAL = FCD_09e53_gLCD_Font3__ReadWidth(FCL_CHARACTER); // } else { } // #else //Code has been optimised out by the pre-processor #endif #if (0) // 3 > 3 //Code has been optimised out by the pre-processor // #else #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets a stat from the selected embedded ASCII font data. : :Parameters for macro ReadFontStat: : Font : Font selection range: 0 to (NumFonts - 1) : Index : 0=SpaceWidth, 1=PixelHeight : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_0ba71_Base_GLCD__ReadFontStat(MX_UINT8 FCL_FONT, MX_UINT8 FCL_INDEX) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCR_RETVAL; // .Return = 0 FCR_RETVAL = 0; if (FCL_FONT >= 3) { // .Font = 0 FCL_FONT = 0; // } else { } if (FCL_FONT == 0) { FCR_RETVAL = FCD_09e51_gLCD_Font1__ReadFontStat(FCL_INDEX); // } else { } #if (1) // 3 > 1 if (FCL_FONT == 1) { FCR_RETVAL = FCD_09e52_gLCD_Font2__ReadFontStat(FCL_INDEX); // } else { } // #else //Code has been optimised out by the pre-processor #endif #if (1) // 3 > 2 if (FCL_FONT == 2) { FCR_RETVAL = FCD_09e53_gLCD_Font3__ReadFontStat(FCL_INDEX); // } else { } // #else //Code has been optimised out by the pre-processor #endif #if (0) // 3 > 3 //Code has been optimised out by the pre-processor // #else #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Gets a byte from the selected embedded ASCII font data. : :Parameters for macro ReadFontByte: : Font : Font selection range: 0 to (NumFonts - 1) : Character : ASCII character for example 'A' or 65 : ByteIndex : Font column Ranging 0-4 : :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_0ba71_Base_GLCD__ReadFontByte(MX_UINT8 FCL_FONT, MX_UINT8 FCL_CHARACTER, MX_UINT8 FCL_BYTEINDEX) { //Local variable definitions MX_UINT16 FCL_POSITION; MX_UINT8 FCR_RETVAL; // .Return = 0 FCR_RETVAL = 0; if (FCL_FONT >= 3) { // .Font = 0 FCL_FONT = 0; // } else { } if (FCL_FONT == 0) { FCR_RETVAL = FCD_09e51_gLCD_Font1__ReadASCIILUT(FCL_CHARACTER, FCL_BYTEINDEX); // } else { } #if (1) // 3 > 1 if (FCL_FONT == 1) { FCR_RETVAL = FCD_09e52_gLCD_Font2__ReadASCIILUT(FCL_CHARACTER, FCL_BYTEINDEX); // } else { } // #else //Code has been optimised out by the pre-processor #endif #if (1) // 3 > 2 if (FCL_FONT == 2) { FCR_RETVAL = FCD_09e53_gLCD_Font3__ReadASCIILUT(FCL_CHARACTER, FCL_BYTEINDEX); // } else { } // #else //Code has been optimised out by the pre-processor #endif #if (0) // 3 > 3 //Code has been optimised out by the pre-processor // #else #endif return (FCR_RETVAL); } /*========================================================================*\ Use :gLCD_ILI9488_SPI1 :GUID: 3408fde0-f512-487b-8902-74cd56623191 :Location: C:\ProgramData\MatrixTSL\FlowcodeV10\Components\gLCD_ILI9488_SPI.fcpx :Version: 10.0 (0x200028) :Timestamp: 27\06\2023 :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Sets the backlight enable pin allowing the display backlight to switch on. :Switching the backlight on and off at high speed allow the light to be dimmed. \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__BacklightOn() { #if (1) // led_pin = 1 SET_PORT_PIN(A, 26, 1); // #else //Code has been optimised out by the pre-processor #endif } /*=----------------------------------------------------------------------=*\ Use :Sets a pixel with the current foreground colour at current pixel location. :Not compatible with orientations other than 0. \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__FastBPlot() { //Local variable definitions #define FCLsz_COL 3 MX_UINT8 FCL_COL[FCLsz_COL]; #if (1) // PixelBuffer[PixelPointer] = bg_col_var[0] // PixelBuffer[PixelPointer + 1] = bg_col_var[1] // PixelBuffer[PixelPointer + 2] = bg_col_var[2] FCV_01de1_gLCD_ILI9488_SPI1__PIXELBUFFER[FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[0]; FCV_01de1_gLCD_ILI9488_SPI1__PIXELBUFFER[FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER + 1] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[1]; FCV_01de1_gLCD_ILI9488_SPI1__PIXELBUFFER[FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER + 2] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[2]; // PixelPointer = PixelPointer + 3 FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER = FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER + 3; // PixelCount = PixelCount - 1 FCV_01de1_gLCD_ILI9488_SPI1__PIXELCOUNT = FCV_01de1_gLCD_ILI9488_SPI1__PIXELCOUNT - 1; if ((FCV_01de1_gLCD_ILI9488_SPI1__PIXELCOUNT == 0) || (FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER == (320 * 3))) { #if (0) //Code has been optimised out by the pre-processor // #else #endif FC_CAL_SPI_Transaction_1(FCV_01de1_gLCD_ILI9488_SPI1__PIXELBUFFER, 960, FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER); #if (0) //Code has been optimised out by the pre-processor // #else #endif // PixelPointer = 0 FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER = 0; // } else { } #else //Code has been optimised out by the pre-processor #endif //Local variable definitions #undef FCLsz_COL } /*=----------------------------------------------------------------------=*\ Use :Allows the fonts to be scaled up by multiplying the number of pixels on the X and Y. : :Parameters for macro SetFontScaler: : ScaleX : Sets the horizontal scale of the font, default 1 : ScaleY : Sets the vertical scale of the font, default 1 \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(MX_UINT8 FCL_SCALEX, MX_UINT8 FCL_SCALEY) { if (FCL_SCALEX > 0) { // ScaleX = .ScaleX FCV_01de1_gLCD_ILI9488_SPI1__SCALEX = FCL_SCALEX; } else { // ScaleX = 1 FCV_01de1_gLCD_ILI9488_SPI1__SCALEX = 1; } if (FCL_SCALEY > 0) { // ScaleY = .ScaleY FCV_01de1_gLCD_ILI9488_SPI1__SCALEY = FCL_SCALEY; } else { // ScaleY = 1 FCV_01de1_gLCD_ILI9488_SPI1__SCALEY = 1; } } /*=----------------------------------------------------------------------=*\ Use :Parameters for macro LCD_Write_Reg: : data : MX_UINT8 \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(MX_UINT8 FCL_DATA) { // dc_pin = 0 SET_PORT_PIN(A, 27, 0); #if (0) //Code has been optimised out by the pre-processor // #else #endif FC_CAL_SPI_Master_Byte_1(FCL_DATA); #if (0) //Code has been optimised out by the pre-processor // #else #endif } /*=----------------------------------------------------------------------=*\ Use :This macro prints a decimal number to the Graphical LCD. : :Parameters for macro PrintNumber: : Number : Byte or Integer number to send to the display. : X : X pixel coordinate to set the output string position. : Y : Y pixel coordinate to set the output string position. : Font : Range: 0 to 31 - 0=5x8, 1=10x8, 2=10x16, 3=5x16, 4-31=Extended Sizes : Transparent : Specifies if the background of the text is drawn - 0 = Background colour is drawn, 1 = Background colour not drawn. \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(MX_SINT16 FCL_NUMBER, MX_UINT16 FCL_X, MX_UINT16 FCL_Y, MX_UINT8 FCL_FONT, MX_UINT8 FCL_TRANSPARENT) { //Local variable definitions #define FCLsz_TEMP 8 MX_CHAR FCL_TEMP[FCLsz_TEMP]; // .temp = ToString$ (.Number) FCI_TOSTRING(FCL_NUMBER, FCL_TEMP,8); FCD_01de1_gLCD_ILI9488_SPI1__Print(FCL_TEMP, FCLsz_TEMP, FCL_X, FCL_Y, FCL_FONT, FCL_TRANSPARENT); //Local variable definitions #undef FCLsz_TEMP } /*=----------------------------------------------------------------------=*\ Use :Draws a line with the current foreground colour from pixel location X1, Y1 to pixel location X2, Y2. : :Parameters for macro DrawLine: : X1 : MX_UINT16 : Y1 : MX_UINT16 : X2 : MX_UINT16 : Y2 : MX_UINT16 \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(MX_UINT16 FCL_X1, MX_UINT16 FCL_Y1, MX_UINT16 FCL_X2, MX_UINT16 FCL_Y2) { //Local variable definitions MX_SINT16 FCL_C1; MX_SINT16 FCL_M1; MX_SINT16 FCL_D1 = (0); MX_SINT16 FCL_PIXELX; MX_SINT16 FCL_PIXELY; MX_SINT16 FCL_YINC = (1); MX_SINT16 FCL_XINC = (1); MX_SINT16 FCL_X; MX_SINT16 FCL_Y; MX_BOOL FCL_STRAIGHT = (0); // .PixelX = .X2 - .X1 // .PixelY = .Y2 - .Y1 FCL_PIXELX = FCL_X2 - FCL_X1; FCL_PIXELY = FCL_Y2 - FCL_Y1; // .X = .X1 // .Y = .Y1 FCL_X = FCL_X1; FCL_Y = FCL_Y1; if (FCL_PIXELX < 0) { // .Xinc = -1 // .PixelX = .PixelX * -1 FCL_XINC = -1; FCL_PIXELX = FCL_PIXELX * -1; } else { if (FCL_PIXELX == 0) { // .Straight = 1 // .PixelX = 1 FCL_STRAIGHT = 1; FCL_PIXELX = 1; // } else { } } if (FCL_PIXELY < 0) { // .Yinc = -1 // .PixelY = .PixelY * -1 FCL_YINC = -1; FCL_PIXELY = FCL_PIXELY * -1; } else { if (FCL_PIXELY == 0) { // .Straight = 1 // .PixelY = 1 FCL_STRAIGHT = 1; FCL_PIXELY = 1; // } else { } } if (FCL_STRAIGHT) { FCD_01de1_gLCD_ILI9488_SPI1__Window(FCL_X1, FCL_Y1, FCL_X2, FCL_Y2); // .PixelX = (.PixelX * .PixelY) + 1 FCL_PIXELX = (FCL_PIXELX * FCL_PIXELY) + 1; for (FCLV_LOOP1=0; (FCLV_LOOP1)<(FCL_PIXELX); (FCLV_LOOP1)++) { FCD_01de1_gLCD_ILI9488_SPI1__FastPlot(); } } else { if (FCL_PIXELY <= FCL_PIXELX) { // .C1 = 2 * .PixelX // .M1 = 2 * .PixelY FCL_C1 = 2 * FCL_PIXELX; FCL_M1 = 2 * FCL_PIXELY; while (FCL_X != FCL_X2) { FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X, FCL_Y); // .X = .X + .Xinc FCL_X = FCL_X + FCL_XINC; // .D1 = .D1 + .M1 FCL_D1 = FCL_D1 + FCL_M1; if (FCL_D1 > FCL_PIXELX) { // .Y = .Y + .Yinc FCL_Y = FCL_Y + FCL_YINC; // .D1 = .D1 - .C1 FCL_D1 = FCL_D1 - FCL_C1; // } else { } } } else { // .C1 = 2 * .PixelY // .M1 = 2 * .PixelX FCL_C1 = 2 * FCL_PIXELY; FCL_M1 = 2 * FCL_PIXELX; while (FCL_Y != FCL_Y2) { FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X, FCL_Y); // .Y = .Y + .Yinc FCL_Y = FCL_Y + FCL_YINC; // .D1 = .D1 + .M1 FCL_D1 = FCL_D1 + FCL_M1; if (FCL_D1 > FCL_PIXELY) { // .X = .X + .Xinc FCL_X = FCL_X + FCL_XINC; // .D1 = .D1 - .C1 FCL_D1 = FCL_D1 - FCL_C1; // } else { } } } FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X, FCL_Y); } } /*=----------------------------------------------------------------------=*\ Use :Parameters for macro LCD_Write_Data8: : data : MX_UINT8 \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(MX_UINT8 FCL_DATA) { // dc_pin = 1 SET_PORT_PIN(A, 27, 1); #if (0) //Code has been optimised out by the pre-processor // #else #endif FC_CAL_SPI_Master_Byte_1(FCL_DATA); #if (0) //Code has been optimised out by the pre-processor // #else #endif } /*=----------------------------------------------------------------------=*\ Use :Returns : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8() { //Local variable definitions MX_UINT8 FCR_RETVAL; // dc_pin = 1 SET_PORT_PIN(A, 27, 1); #if (0) //Code has been optimised out by the pre-processor // #else #endif FCR_RETVAL = FC_CAL_SPI_Master_Byte_1(0x55); #if (0) //Code has been optimised out by the pre-processor // #else #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Draws an ellipse object on the display with the center of the ellipse at the location X,Y : :Parameters for macro DrawEllipse: : X : X Coordinate for the center of the circle : Y : Y coordinate for the center of the circle : XRadius : Radius of the circle on the X axis specified in pixels : YRadius : Radius of the circle on the Y axis specified in pixels : Transparent : 0=Fill inside circle using background colour / 1=Draw outer circle only : Solid : 0=Use Transparent Setting / 1=Fill with foreground colour \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__DrawEllipse(MX_UINT16 FCL_X, MX_UINT16 FCL_Y, MX_UINT16 FCL_XRADIUS, MX_UINT16 FCL_YRADIUS, MX_UINT8 FCL_TRANSPARENT, MX_UINT8 FCL_SOLID) { //Local variable definitions MX_SINT16 FCL_ERR; MX_SINT16 FCL_CURX; MX_SINT16 FCL_CURY; MX_UINT8 FCL_REP = (0x0); MX_SINT16 FCL_E2; MX_FLOAT FCL_K; #define FCLsz_BG 3 MX_UINT8 FCL_BG[FCLsz_BG]; #define FCLsz_FG 3 MX_UINT8 FCL_FG[FCLsz_FG]; if (FCL_SOLID == 1) { FCC_DrawEllipse_A: ; // .CurX = 0 // .CurY = 0 - .YRadius FCL_CURX = 0; FCL_CURY = 0 - FCL_YRADIUS; // .err = 2 - (2 * .XRadius) FCL_ERR = 2 - (2 * FCL_XRADIUS); // .K = FLOAT (FLOAT .YRadius / FLOAT .XRadius) FCL_K = (flt_div(flt_fromi(FCL_YRADIUS), flt_fromi(FCL_XRADIUS))); while (1) { FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(flt_toi(flt_sub(flt_fromi(FCL_X), (flt_div(flt_fromi(FCL_CURX), FCL_K)))), FCL_Y + FCL_CURY, flt_toi(flt_add(flt_fromi(FCL_X), (flt_div(flt_fromi(FCL_CURX), FCL_K)))), FCL_Y + FCL_CURY); FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(flt_toi(flt_sub(flt_fromi(FCL_X), (flt_div(flt_fromi(FCL_CURX), FCL_K)))), FCL_Y - FCL_CURY, flt_toi(flt_add(flt_fromi(FCL_X), (flt_div(flt_fromi(FCL_CURX), FCL_K)))), FCL_Y - FCL_CURY); // .e2 = .err FCL_E2 = FCL_ERR; if (FCL_E2 <= FCL_CURX) { // .CurX = .CurX + 1 // .err = .err + ((.CurX * 2) + 1) FCL_CURX = FCL_CURX + 1; FCL_ERR = FCL_ERR + ((FCL_CURX * 2) + 1); if ((0 - FCL_CURY == FCL_CURX) && (FCL_E2 <= FCL_CURY)) { // .e2 = 0 FCL_E2 = 0; // } else { } // } else { } if (FCL_E2 > FCL_CURY) { // .CurY = .CurY + 1 // .err = .err + ((.CurY * 2) + 1) FCL_CURY = FCL_CURY + 1; FCL_ERR = FCL_ERR + ((FCL_CURY * 2) + 1); // } else { } if ((FCL_CURY <= 0) == 0) break; } } else { if (FCL_TRANSPARENT == 1) { FCC_DrawEllipse_B: ; // .CurX = 0 // .CurY = 0 - .YRadius FCL_CURX = 0; FCL_CURY = 0 - FCL_YRADIUS; // .err = 2 - (2 * .XRadius) FCL_ERR = 2 - (2 * FCL_XRADIUS); // .K = FLOAT (FLOAT .YRadius / FLOAT .XRadius) FCL_K = (flt_div(flt_fromi(FCL_YRADIUS), flt_fromi(FCL_XRADIUS))); while (1) { FCD_01de1_gLCD_ILI9488_SPI1__Plot(flt_toi(flt_sub(flt_fromi(FCL_X), (flt_div(flt_fromi(FCL_CURX), FCL_K)))), FCL_Y + FCL_CURY); FCD_01de1_gLCD_ILI9488_SPI1__Plot(flt_toi(flt_add(flt_fromi(FCL_X), (flt_div(flt_fromi(FCL_CURX), FCL_K)))), FCL_Y + FCL_CURY); FCD_01de1_gLCD_ILI9488_SPI1__Plot(flt_toi(flt_add(flt_fromi(FCL_X), (flt_div(flt_fromi(FCL_CURX), FCL_K)))), FCL_Y - FCL_CURY); FCD_01de1_gLCD_ILI9488_SPI1__Plot(flt_toi(flt_sub(flt_fromi(FCL_X), (flt_div(flt_fromi(FCL_CURX), FCL_K)))), FCL_Y - FCL_CURY); // .e2 = .err FCL_E2 = FCL_ERR; if (FCL_E2 <= FCL_CURX) { // .CurX = .CurX + 1 // .err = .err + ((.CurX * 2) + 1) FCL_CURX = FCL_CURX + 1; FCL_ERR = FCL_ERR + ((FCL_CURX * 2) + 1); if ((0 - FCL_CURY == FCL_CURX) && (FCL_E2 <= FCL_CURY)) { // .e2 = 0 FCL_E2 = 0; // } else { } // } else { } if (FCL_E2 > FCL_CURY) { // .CurY = .CurY + 1 // .err = .err + ((.CurY * 2) + 1) FCL_CURY = FCL_CURY + 1; FCL_ERR = FCL_ERR + ((FCL_CURY * 2) + 1); // } else { } if ((FCL_CURY <= 0) == 0) break; } } else { // .FG[0] = fg_col_var[0] // .FG[1] = fg_col_var[1] // .FG[2] = fg_col_var[2] // .BG[0] = bg_col_var[0] // .BG[1] = bg_col_var[1] // .BG[2] = bg_col_var[2] FCL_FG[0] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0]; FCL_FG[1] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1]; FCL_FG[2] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2]; FCL_BG[0] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[0]; FCL_BG[1] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[1]; FCL_BG[2] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[2]; // fg_col_var[0] = .BG[0] // fg_col_var[1] = .BG[1] // fg_col_var[2] = .BG[2] FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0] = FCL_BG[0]; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1] = FCL_BG[1]; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2] = FCL_BG[2]; // .Rep = 1 FCL_REP = 1; goto FCC_DrawEllipse_A; } } if (FCL_REP == 1) { // .Rep = .Rep + 1 FCL_REP = FCL_REP + 1; // fg_col_var[0] = .FG[0] // fg_col_var[1] = .FG[1] // fg_col_var[2] = .FG[2] FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0] = FCL_FG[0]; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1] = FCL_FG[1]; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2] = FCL_FG[2]; goto FCC_DrawEllipse_B; // } else { } //Local variable definitions #undef FCLsz_BG #undef FCLsz_FG } /*=----------------------------------------------------------------------=*\ Use :Sets a pixel with the current foreground colour at pixel location X, Y. : :Parameters for macro Plot: : X1 : MX_UINT16 : Y1 : MX_UINT16 \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__Plot(MX_UINT16 FCL_X1, MX_UINT16 FCL_Y1) { //Local variable definitions #define FCLsz_COL 3 MX_UINT8 FCL_COL[FCLsz_COL]; FCD_01de1_gLCD_ILI9488_SPI1__Window(FCL_X1, FCL_Y1, FCL_X1 + 1, FCL_Y1 + 1); #if (0) //Code has been optimised out by the pre-processor // #else #endif // .col[0] = fg_col_var[0] // .col[1] = fg_col_var[1] // .col[2] = fg_col_var[2] FCL_COL[0] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0]; FCL_COL[1] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1]; FCL_COL[2] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2]; FC_CAL_SPI_Transaction_1(FCL_COL, 3, 3); #if (0) //Code has been optimised out by the pre-processor // #else #endif //Local variable definitions #undef FCLsz_COL } /*=----------------------------------------------------------------------=*\ Use :Sets a pixel with the current foreground colour at current pixel location. :Not compatible with orientations other than 0. \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__FastPlot() { //Local variable definitions #define FCLsz_COL 3 MX_UINT8 FCL_COL[FCLsz_COL]; #if (1) // PixelBuffer[PixelPointer] = fg_col_var[0] // PixelBuffer[PixelPointer + 1] = fg_col_var[1] // PixelBuffer[PixelPointer + 2] = fg_col_var[2] FCV_01de1_gLCD_ILI9488_SPI1__PIXELBUFFER[FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0]; FCV_01de1_gLCD_ILI9488_SPI1__PIXELBUFFER[FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER + 1] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1]; FCV_01de1_gLCD_ILI9488_SPI1__PIXELBUFFER[FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER + 2] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2]; // PixelPointer = PixelPointer + 3 FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER = FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER + 3; // PixelCount = PixelCount - 1 FCV_01de1_gLCD_ILI9488_SPI1__PIXELCOUNT = FCV_01de1_gLCD_ILI9488_SPI1__PIXELCOUNT - 1; if ((FCV_01de1_gLCD_ILI9488_SPI1__PIXELCOUNT == 0) || (FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER == (320 * 3))) { #if (0) //Code has been optimised out by the pre-processor // #else #endif FC_CAL_SPI_Transaction_1(FCV_01de1_gLCD_ILI9488_SPI1__PIXELBUFFER, 960, FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER); #if (0) //Code has been optimised out by the pre-processor // #else #endif // PixelPointer = 0 FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER = 0; // } else { } #else //Code has been optimised out by the pre-processor #endif //Local variable definitions #undef FCLsz_COL } /*=----------------------------------------------------------------------=*\ Use :Controls the way data is printed out on the display allowing multiple different viewing orientations. Default is 0. : :Parameters for macro SetDisplayOrientation: : Orientation : 0=Default, 1=90??CW, 2=180??CW, 3=270??CW \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__SetDisplayOrientation(MX_UINT8 FCL_ORIENTATION) { // Orientation = .Orientation FCV_01de1_gLCD_ILI9488_SPI1__ORIENTATION = FCL_ORIENTATION; } /*=----------------------------------------------------------------------=*\ Use :Clears the backlight enable pin allowing the display backlight to switch off. :Switching the backlight on and off at high speed allow the light to be dimmed. \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__BacklightOff() { #if (1) // led_pin = 0 SET_PORT_PIN(A, 26, 0); // #else //Code has been optimised out by the pre-processor #endif } /*=----------------------------------------------------------------------=*\ Use :Sets a pixel with the current background colour at pixel location X, Y. : :Parameters for macro BPlot: : X1 : MX_UINT16 : Y1 : MX_UINT16 \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__BPlot(MX_UINT16 FCL_X1, MX_UINT16 FCL_Y1) { //Local variable definitions #define FCLsz_COL 3 MX_UINT8 FCL_COL[FCLsz_COL]; FCD_01de1_gLCD_ILI9488_SPI1__Window(FCL_X1, FCL_Y1, FCL_X1, FCL_Y1); #if (0) //Code has been optimised out by the pre-processor // #else #endif // .col[0] = bg_col_var[0] // .col[1] = bg_col_var[1] // .col[2] = bg_col_var[2] FCL_COL[0] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[0]; FCL_COL[1] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[1]; FCL_COL[2] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[2]; FC_CAL_SPI_Transaction_1(FCL_COL, 3, 3); #if (0) //Code has been optimised out by the pre-processor // #else #endif //Local variable definitions #undef FCLsz_COL } /*=----------------------------------------------------------------------=*\ Use :Parameters for macro Window: : X1 : MX_UINT16 : Y1 : MX_UINT16 : X2 : MX_UINT16 : Y2 : MX_UINT16 \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__Window(MX_UINT16 FCL_X1, MX_UINT16 FCL_Y1, MX_UINT16 FCL_X2, MX_UINT16 FCL_Y2) { //Local variable definitions MX_UINT16 FCL_TEMP; #define FCLsz_DATA 4 MX_UINT8 FCL_DATA[FCLsz_DATA]; switch (FCV_01de1_gLCD_ILI9488_SPI1__ORIENTATION) { case 1: { // .temp = .Y1 // .Y1 = .Y2 // .Y2 = .temp FCL_TEMP = FCL_Y1; FCL_Y1 = FCL_Y2; FCL_Y2 = FCL_TEMP; // .temp = pixel_width - (.Y1 + 1) // .Y1 = .X1 // .X1 = .temp FCL_TEMP = 320 - (FCL_Y1 + 1); FCL_Y1 = FCL_X1; FCL_X1 = FCL_TEMP; // .temp = pixel_width - (.Y2 + 1) // .Y2 = .X2 // .X2 = .temp FCL_TEMP = 320 - (FCL_Y2 + 1); FCL_Y2 = FCL_X2; FCL_X2 = FCL_TEMP; break; } case 2: { // .temp = .Y1 // .Y1 = .Y2 // .Y2 = .temp FCL_TEMP = FCL_Y1; FCL_Y1 = FCL_Y2; FCL_Y2 = FCL_TEMP; // .X1 = pixel_width - (.X1 + 1) // .Y1 = pixel_height - (.Y1 + 1) FCL_X1 = 320 - (FCL_X1 + 1); FCL_Y1 = 480 - (FCL_Y1 + 1); // .X2 = pixel_width - (.X2 + 1) // .Y2 = pixel_height - (.Y2 + 1) FCL_X2 = 320 - (FCL_X2 + 1); FCL_Y2 = 480 - (FCL_Y2 + 1); break; } case 3: { // .temp = .Y1 // .Y1 = pixel_height - (.X1 + 1) // .X1 = .temp FCL_TEMP = FCL_Y1; FCL_Y1 = 480 - (FCL_X1 + 1); FCL_X1 = FCL_TEMP; // .temp = .Y2 // .Y2 = pixel_height - (.X2 + 1) // .X2 = .temp FCL_TEMP = FCL_Y2; FCL_Y2 = 480 - (FCL_X2 + 1); FCL_X2 = FCL_TEMP; break; } // default: } if (FCL_X1 > FCL_X2) { // .temp = .X1 // .X1 = .X2 // .X2 = .temp FCL_TEMP = FCL_X1; FCL_X1 = FCL_X2; FCL_X2 = FCL_TEMP; // } else { } if (FCL_Y1 > FCL_Y2) { // .temp = .Y1 // .Y1 = .Y2 // .Y2 = .temp FCL_TEMP = FCL_Y1; FCL_Y1 = FCL_Y2; FCL_Y2 = FCL_TEMP; // } else { } #if (1) // PixelCount = ((.X2 - .X1) + 1) * ((.Y2 - .Y1) + 1) // PixelPointer = 0 FCV_01de1_gLCD_ILI9488_SPI1__PIXELCOUNT = ((FCL_X2 - FCL_X1) + 1) * ((FCL_Y2 - FCL_Y1) + 1); FCV_01de1_gLCD_ILI9488_SPI1__PIXELPOINTER = 0; // #else //Code has been optimised out by the pre-processor #endif #if (0) //Code has been optimised out by the pre-processor // #else #endif #if (0) //Code has been optimised out by the pre-processor #else //Comment: //Set Column Address // dc_pin = 0 SET_PORT_PIN(A, 27, 0); FC_CAL_SPI_Master_Byte_1(0x2A); // dc_pin = 1 SET_PORT_PIN(A, 27, 1); #if 0 // Disabled code FC_CAL_SPI_Master_Byte_1(FCL_X1 >> 8); #endif // Disabled code #if 0 // Disabled code FC_CAL_SPI_Master_Byte_1(FCL_X1); #endif // Disabled code #if 0 // Disabled code FC_CAL_SPI_Master_Byte_1(FCL_X2 >> 8); #endif // Disabled code #if 0 // Disabled code FC_CAL_SPI_Master_Byte_1(FCL_X2); #endif // Disabled code // .data[0] = .X1 >> 8 // .data[1] = .X1 // .data[2] = .X2 >> 8 // .data[3] = .X2 FCL_DATA[0] = FCL_X1 >> 8; FCL_DATA[1] = FCL_X1; FCL_DATA[2] = FCL_X2 >> 8; FCL_DATA[3] = FCL_X2; FC_CAL_SPI_Transaction_1(FCL_DATA, 4, 4); // col = .x1 FCV_01de1_gLCD_ILI9488_SPI1__COL = FCL_X1; #endif #if (0) //Code has been optimised out by the pre-processor #else //Comment: //Set Row Address // dc_pin = 0 SET_PORT_PIN(A, 27, 0); FC_CAL_SPI_Master_Byte_1(0x2B); // dc_pin = 1 SET_PORT_PIN(A, 27, 1); #if 0 // Disabled code FC_CAL_SPI_Master_Byte_1(FCL_Y1 >> 8); #endif // Disabled code #if 0 // Disabled code FC_CAL_SPI_Master_Byte_1(FCL_Y1); #endif // Disabled code #if 0 // Disabled code FC_CAL_SPI_Master_Byte_1(FCL_Y2 >> 8); #endif // Disabled code #if 0 // Disabled code FC_CAL_SPI_Master_Byte_1(FCL_Y2); #endif // Disabled code // .data[0] = .Y1 >> 8 // .data[1] = .Y1 // .data[2] = .Y2 >> 8 // .data[3] = .Y2 FCL_DATA[0] = FCL_Y1 >> 8; FCL_DATA[1] = FCL_Y1; FCL_DATA[2] = FCL_Y2 >> 8; FCL_DATA[3] = FCL_Y2; FC_CAL_SPI_Transaction_1(FCL_DATA, 4, 4); // row = .y1 FCV_01de1_gLCD_ILI9488_SPI1__ROW = FCL_Y1; #endif //Comment: //Prep for data // dc_pin = 0 SET_PORT_PIN(A, 27, 0); FC_CAL_SPI_Master_Byte_1(0x2C); // dc_pin = 1 SET_PORT_PIN(A, 27, 1); #if (0) //Code has been optimised out by the pre-processor // #else #endif //Local variable definitions #undef FCLsz_DATA } /*=----------------------------------------------------------------------=*\ Use :This macro prints a string of characters to the Graphical LCD. : :Parameters for macro Print: : Str[20] : String of characters to send to the display. : X1 : X pixel coordinate to set the output string position. : Y1 : Y pixel coordinate to set the output string position. : Font : Selects which Font to use Range: 0 to Font Count : Transparent : Specifies if the background of the text is drawn - 0 = Background colour is drawn, 1 = Background colour not drawn. \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__Print(MX_CHAR *FCL_STR, MX_UINT16 FCLsz_STR, MX_UINT16 FCL_X1, MX_UINT16 FCL_Y1, MX_UINT8 FCL_FONT, MX_UINT8 FCL_TRANSPARENT) { //Local variable definitions MX_UINT8 FCL_BYTESPERCOLUMN; MX_UINT8 FCL_CHARACTERCOLUMNS; MX_UINT8 FCL_CHARACTERHEIGHT; MX_UINT8 FCL_COLUMNINDEX; MX_UINT8 FCL_COLUMNSUBINDEX; MX_UINT8 FCL_PIXELDATA; MX_UINT8 FCL_SPACECOLUMNS; MX_UINT8 FCL_IDX; MX_UINT8 FCL_LEN_STR; MX_UINT8 FCL_YCOUNT; MX_UINT8 FCL_YPIX; MX_UINT16 FCL_XCOUNT; MX_UINT8 FCL_H; // .xcount = 0 // .idx = 0 FCL_XCOUNT = 0; FCL_IDX = 0; // .len_str = Length$ (.Str) FCL_LEN_STR = FCI_GETLENGTH(FCL_STR, FCLsz_STR); FCL_SPACECOLUMNS = FCD_0ba71_Base_GLCD__ReadFontStat(FCL_FONT, 0); FCL_CHARACTERHEIGHT = FCD_0ba71_Base_GLCD__ReadFontStat(FCL_FONT, 1); // .BytesPerColumn = ((.CharacterHeight - 1) >> 3) + 1 FCL_BYTESPERCOLUMN = ((FCL_CHARACTERHEIGHT - 1) >> 3) + 1; while (FCL_IDX < FCL_LEN_STR) { FCL_CHARACTERCOLUMNS = FCD_0ba71_Base_GLCD__ReadFontWidth(FCL_FONT, FCL_STR[FCL_IDX]); // .ColumnSubIndex = 0 FCL_COLUMNSUBINDEX = 0; while (FCL_COLUMNSUBINDEX < FCL_BYTESPERCOLUMN) { if (FCL_COLUMNSUBINDEX) { // .xcount = .xcount - ((.CharacterColumns + .SpaceColumns) * ScaleX) FCL_XCOUNT = FCL_XCOUNT - ((FCL_CHARACTERCOLUMNS + FCL_SPACECOLUMNS) * FCV_01de1_gLCD_ILI9488_SPI1__SCALEX); // } else { } // .ColumnIndex = 0 FCL_COLUMNINDEX = 0; while (FCL_COLUMNINDEX < (FCL_CHARACTERCOLUMNS + FCL_SPACECOLUMNS)) { for (FCLV_LOOP2=0; (FCLV_LOOP2)<(FCV_01de1_gLCD_ILI9488_SPI1__SCALEX); (FCLV_LOOP2)++) { if (FCL_COLUMNINDEX < FCL_CHARACTERCOLUMNS) { FCL_PIXELDATA = FCD_0ba71_Base_GLCD__ReadFontByte(FCL_FONT, FCL_STR[FCL_IDX], FCL_COLUMNINDEX + (FCL_CHARACTERCOLUMNS * FCL_COLUMNSUBINDEX)); } else { // .PixelData = 0 FCL_PIXELDATA = 0; } // .ycount = (.ColumnSubIndex * 8) * ScaleY FCL_YCOUNT = (FCL_COLUMNSUBINDEX * 8) * FCV_01de1_gLCD_ILI9488_SPI1__SCALEY; if (((FCL_COLUMNSUBINDEX + 1) * 8) < FCL_CHARACTERHEIGHT) { // .ypix = 0 FCL_YPIX = 0; // .h = 8 FCL_H = 8; } else { if (((FCV_01de1_gLCD_ILI9488_SPI1__ORIENTATION == 1) || (FCV_01de1_gLCD_ILI9488_SPI1__ORIENTATION == 2)) && FCL_TRANSPARENT == 0) { // .ypix = 0 FCL_YPIX = 0; // .h = .CharacterHeight - (.ColumnSubIndex * 8) FCL_H = FCL_CHARACTERHEIGHT - (FCL_COLUMNSUBINDEX * 8); } else { // .ypix = ((.ColumnSubIndex + 1) * 8) - .CharacterHeight FCL_YPIX = ((FCL_COLUMNSUBINDEX + 1) * 8) - FCL_CHARACTERHEIGHT; // .h = 8 FCL_H = 8; } } //Comment: //We can only do window and fast plot when transparent = 0 if (FCL_TRANSPARENT == 0) { FCD_01de1_gLCD_ILI9488_SPI1__Window(FCL_X1 + FCL_XCOUNT, FCL_Y1 + FCL_YCOUNT, FCL_X1 + FCL_XCOUNT, FCL_Y1 + FCL_YCOUNT + ((FCL_H - FCL_YPIX) * FCV_01de1_gLCD_ILI9488_SPI1__SCALEY) - 1); while (FCL_YPIX < FCL_H) { for (FCLV_LOOP4=0; (FCLV_LOOP4)<(FCV_01de1_gLCD_ILI9488_SPI1__SCALEY); (FCLV_LOOP4)++) { if ((FCV_01de1_gLCD_ILI9488_SPI1__ORIENTATION == 1) || (FCV_01de1_gLCD_ILI9488_SPI1__ORIENTATION == 2)) { if (FCL_PIXELDATA & (0x80 >> FCL_YPIX)) { FCD_01de1_gLCD_ILI9488_SPI1__FastPlot(); } else { if (FCL_TRANSPARENT == 0) { FCD_01de1_gLCD_ILI9488_SPI1__FastBPlot(); // } else { } } } else { if (FCL_PIXELDATA & (0x01 << FCL_YPIX)) { FCD_01de1_gLCD_ILI9488_SPI1__FastPlot(); } else { if (FCL_TRANSPARENT == 0) { FCD_01de1_gLCD_ILI9488_SPI1__FastBPlot(); // } else { } } } // .ycount = .ycount + 1 FCL_YCOUNT = FCL_YCOUNT + 1; } // .ypix = .ypix + 1 FCL_YPIX = FCL_YPIX + 1; } } else { while (FCL_YPIX < 8) { for (FCLV_LOOP3=0; (FCLV_LOOP3)<(FCV_01de1_gLCD_ILI9488_SPI1__SCALEY); (FCLV_LOOP3)++) { if (FCL_PIXELDATA & (0x01 << FCL_YPIX)) { FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X1 + FCL_XCOUNT, FCL_Y1 + FCL_YCOUNT); } else { if (FCL_TRANSPARENT == 0) { FCD_01de1_gLCD_ILI9488_SPI1__BPlot(FCL_X1 + FCL_XCOUNT, FCL_Y1 + FCL_YCOUNT); // } else { } } // .ycount = .ycount + 1 FCL_YCOUNT = FCL_YCOUNT + 1; } // .ypix = .ypix + 1 FCL_YPIX = FCL_YPIX + 1; } } // .xcount = .xcount + 1 FCL_XCOUNT = FCL_XCOUNT + 1; } // .ColumnIndex = .ColumnIndex + 1 FCL_COLUMNINDEX = FCL_COLUMNINDEX + 1; } // .ColumnSubIndex = .ColumnSubIndex + 1 FCL_COLUMNSUBINDEX = FCL_COLUMNSUBINDEX + 1; } // .idx = .idx + 1 FCL_IDX = FCL_IDX + 1; } #if (0) // 0 == 1 //Code has been optimised out by the pre-processor #else // ::Panel.Graphics.DrawEnd() #endif } /*=----------------------------------------------------------------------=*\ Use :This macro clears the display of any previous output by overwriting the entire display with the background colour. \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay() { //Local variable definitions MX_UINT16 FCL_Y = (0x0); MX_UINT16 FCL_X = (0x0); MX_UINT8 FCL_ORIENTATIONSAVE; #define FCLsz_BUFF 120 MX_UINT8 FCL_BUFF[FCLsz_BUFF]; MX_UINT8 FCL_BUFFIDX; // .OrientationSave = Orientation // Orientation = 0 FCL_ORIENTATIONSAVE = FCV_01de1_gLCD_ILI9488_SPI1__ORIENTATION; FCV_01de1_gLCD_ILI9488_SPI1__ORIENTATION = 0; FCD_01de1_gLCD_ILI9488_SPI1__Window(0, 0, 320 - 1, 480 - 1); // dc_pin = 1 SET_PORT_PIN(A, 27, 1); #if (0) //Code has been optimised out by the pre-processor // #else #endif while (FCL_Y < 480) { // .X = 0 FCL_X = 0; while (FCL_X < 320) { FCD_01de1_gLCD_ILI9488_SPI1__FastBPlot(); // .X = .X + 1 FCL_X = FCL_X + 1; } // .Y = .Y + 1 FCL_Y = FCL_Y + 1; } #if (0) //Code has been optimised out by the pre-processor // #else #endif // Orientation = .OrientationSave FCV_01de1_gLCD_ILI9488_SPI1__ORIENTATION = FCL_ORIENTATIONSAVE; //Local variable definitions #undef FCLsz_BUFF } /*=----------------------------------------------------------------------=*\ Use :Specifies the colour of the background by creating a mixture of red, green and blue. : :Parameters for macro SetBackgroundColour: : Red : 0 - 255 where 0 = no red and 255 = maximum red : Green : 0 - 255 where 0 = no green and 255 = maximum green : Blue : 0 - 255 where 0 = no blue and 255 = maximum blue \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(MX_UINT8 FCL_RED, MX_UINT8 FCL_GREEN, MX_UINT8 FCL_BLUE) { // bg_col_var[0] = .Red // bg_col_var[1] = .Green // bg_col_var[2] = .Blue FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[0] = FCL_RED; FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[1] = FCL_GREEN; FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[2] = FCL_BLUE; } /*=----------------------------------------------------------------------=*\ Use :Draws a circle object on the display with the center of the circle at the location X,Y : :Parameters for macro DrawCircle: : X : X Coordinate for the center of the circle : Y : Y coordinate for the center of the circle : Radius : Radius of the circle specified in pixels : Transparent : 0=Fill inside circle using background colour / 1=Draw outer circle only : Solid : 0=Use Transparent Setting / 1=Fill with foreground colour \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__DrawCircle(MX_UINT16 FCL_X, MX_UINT16 FCL_Y, MX_UINT16 FCL_RADIUS, MX_UINT8 FCL_TRANSPARENT, MX_UINT8 FCL_SOLID) { //Local variable definitions MX_SINT16 FCL_D; MX_SINT16 FCL_CURX; MX_SINT16 FCL_CURY; MX_UINT8 FCL_REP = (0x0); #define FCLsz_BG 3 MX_UINT8 FCL_BG[FCLsz_BG]; #define FCLsz_FG 3 MX_UINT8 FCL_FG[FCLsz_FG]; if (FCL_SOLID == 1) { FCC_DrawCircle_A: ; // .D = 3 - (.Radius << 1) FCL_D = 3 - (FCL_RADIUS << 1); // .CurX = 0 // .CurY = .Radius FCL_CURX = 0; FCL_CURY = FCL_RADIUS; while (FCL_CURX <= FCL_CURY) { if (FCL_CURY > 0) { FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(FCL_X - FCL_CURY, FCL_Y + FCL_CURX, FCL_X + FCL_CURY, FCL_Y + FCL_CURX); FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(FCL_X - FCL_CURY, FCL_Y - FCL_CURX, FCL_X + FCL_CURY, FCL_Y - FCL_CURX); // } else { } if (FCL_CURX > 0) { FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(FCL_X - FCL_CURX, FCL_Y - FCL_CURY, FCL_X + FCL_CURX, FCL_Y - FCL_CURY); FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(FCL_X - FCL_CURX, FCL_Y + FCL_CURY, FCL_X + FCL_CURX, FCL_Y + FCL_CURY); // } else { } if (FCL_D < 0) { // .D = .D + ((.CurX << 2) + 6) FCL_D = FCL_D + ((FCL_CURX << 2) + 6); } else { // .D = .D + (((.CurX - .CurY) << 2) + 10) FCL_D = FCL_D + (((FCL_CURX - FCL_CURY) << 2) + 10); // .CurY = .CurY - 1 FCL_CURY = FCL_CURY - 1; } // .CurX = .CurX + 1 FCL_CURX = FCL_CURX + 1; } } else { if (FCL_TRANSPARENT == 1) { FCC_DrawCircle_B: ; // .D = 3 - (.Radius << 1) FCL_D = 3 - (FCL_RADIUS << 1); // .CurX = 0 // .CurY = .Radius FCL_CURX = 0; FCL_CURY = FCL_RADIUS; while (FCL_CURX <= FCL_CURY) { FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X + FCL_CURX, FCL_Y - FCL_CURY); FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X - FCL_CURX, FCL_Y - FCL_CURY); FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X + FCL_CURY, FCL_Y - FCL_CURX); FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X - FCL_CURY, FCL_Y - FCL_CURX); FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X + FCL_CURX, FCL_Y + FCL_CURY); FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X - FCL_CURX, FCL_Y + FCL_CURY); FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X + FCL_CURY, FCL_Y + FCL_CURX); FCD_01de1_gLCD_ILI9488_SPI1__Plot(FCL_X - FCL_CURY, FCL_Y + FCL_CURX); if (FCL_D < 0) { // .D = .D + ((.CurX << 2) + 6) FCL_D = FCL_D + ((FCL_CURX << 2) + 6); } else { // .D = .D + (((.CurX - .CurY) << 2) + 10) FCL_D = FCL_D + (((FCL_CURX - FCL_CURY) << 2) + 10); // .CurY = .CurY - 1 FCL_CURY = FCL_CURY - 1; } // .CurX = .CurX + 1 FCL_CURX = FCL_CURX + 1; } } else { // .FG[0] = fg_col_var[0] // .FG[1] = fg_col_var[1] // .FG[2] = fg_col_var[2] // .BG[0] = bg_col_var[0] // .BG[1] = bg_col_var[1] // .BG[2] = bg_col_var[2] FCL_FG[0] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0]; FCL_FG[1] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1]; FCL_FG[2] = FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2]; FCL_BG[0] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[0]; FCL_BG[1] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[1]; FCL_BG[2] = FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[2]; // fg_col_var[0] = .BG[0] // fg_col_var[1] = .BG[1] // fg_col_var[2] = .BG[2] FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0] = FCL_BG[0]; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1] = FCL_BG[1]; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2] = FCL_BG[2]; // .Rep = 1 FCL_REP = 1; goto FCC_DrawCircle_A; } } if (FCL_REP == 1) { // .Rep = .Rep + 1 FCL_REP = FCL_REP + 1; // fg_col_var[0] = .FG[0] // fg_col_var[1] = .FG[1] // fg_col_var[2] = .FG[2] FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0] = FCL_FG[0]; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1] = FCL_FG[1]; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2] = FCL_FG[2]; goto FCC_DrawCircle_B; // } else { } //Local variable definitions #undef FCLsz_BG #undef FCLsz_FG } /*=----------------------------------------------------------------------=*\ Use :Specifies the colour of the foreground by creating a mixture of red, green and blue. : :Parameters for macro SetForegroundColour: : Red : 0 - 255 where 0 = no red and 255 = maximum red : Green : 0 - 255 where 0 = no green and 255 = maximum green : Blue : 0 - 255 where 0 = no blue and 255 = maximum blue \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(MX_UINT8 FCL_RED, MX_UINT8 FCL_GREEN, MX_UINT8 FCL_BLUE) { // fg_col_var[0] = .Red // fg_col_var[1] = .Green // fg_col_var[2] = .Blue FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0] = FCL_RED; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1] = FCL_GREEN; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2] = FCL_BLUE; } /*=----------------------------------------------------------------------=*\ Use :Draws a rectangle with the current foreground colour from pixel loaction X1, Y1 to pixel location X2, Y2 : :Parameters for macro DrawRectangle: : X1 : MX_UINT16 : Y1 : MX_UINT16 : X2 : MX_UINT16 : Y2 : MX_UINT16 : Transparent : Chooses the transparency of the box - 0 = Box contains background colour, 1 = Box contains previous pixel data. : Solid : Chooses to fill the box with colour - 0 = Box contains transparency data, 1 = Box contains foreground colour. \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(MX_UINT16 FCL_X1, MX_UINT16 FCL_Y1, MX_UINT16 FCL_X2, MX_UINT16 FCL_Y2, MX_UINT8 FCL_TRANSPARENT, MX_UINT8 FCL_SOLID) { //Local variable definitions MX_UINT16 FCL_XMIN; MX_UINT16 FCL_XMAX; MX_UINT16 FCL_YMIN; MX_UINT16 FCL_YMAX; FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(FCL_X1, FCL_Y1, FCL_X2, FCL_Y1); FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(FCL_X2, FCL_Y1, FCL_X2, FCL_Y2); FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(FCL_X1, FCL_Y2, FCL_X2, FCL_Y2); FCD_01de1_gLCD_ILI9488_SPI1__DrawLine(FCL_X1, FCL_Y1, FCL_X1, FCL_Y2); if (FCL_TRANSPARENT == 0) { if (FCL_X1 > FCL_X2) { // .Xmax = .X1 // .Xmin = .X2 + 1 FCL_XMAX = FCL_X1; FCL_XMIN = FCL_X2 + 1; } else { // .Xmax = .X2 // .Xmin = .X1 + 1 FCL_XMAX = FCL_X2; FCL_XMIN = FCL_X1 + 1; } if (FCL_Y1 > FCL_Y2) { // .Ymax = .Y1 // .Ymin = .Y2 + 1 FCL_YMAX = FCL_Y1; FCL_YMIN = FCL_Y2 + 1; } else { // .Ymax = .Y2 // .Ymin = .Y1 + 1 FCL_YMAX = FCL_Y2; FCL_YMIN = FCL_Y1 + 1; } FCD_01de1_gLCD_ILI9488_SPI1__Window(FCL_XMIN, FCL_YMIN, FCL_XMAX - 1, FCL_YMAX - 1); // .Y1 = .Ymin FCL_Y1 = FCL_YMIN; while (FCL_Y1 < FCL_YMAX) { // .X1 = .Xmin FCL_X1 = FCL_XMIN; while (FCL_X1 < FCL_XMAX) { if (FCL_SOLID) { FCD_01de1_gLCD_ILI9488_SPI1__FastPlot(); } else { FCD_01de1_gLCD_ILI9488_SPI1__FastBPlot(); } // .X1 = .X1 + 1 FCL_X1 = FCL_X1 + 1; } // .Y1 = .Y1 + 1 FCL_Y1 = FCL_Y1 + 1; } // } else { } } /*=----------------------------------------------------------------------=*\ Use :The Init macro must be called once to initialise the Graphical LCD display before any other Graphical LCD component macros are called. \*=----------------------------------------------------------------------=*/ void FCD_01de1_gLCD_ILI9488_SPI1__Initialise() { //Local variable definitions MX_UINT8 FCL_DAT; FC_CAL_SPI_Master_Init_1(); // reset_pin = 1 SET_PORT_PIN(B, 1, 1); FCI_DELAYBYTE_MS(5); // reset_pin = 0 SET_PORT_PIN(B, 1, 0); // chip_sel_pin = 1 SET_PORT_PIN(A, 14, 1); FCI_DELAYBYTE_MS(5); // dc_pin = 0 SET_PORT_PIN(A, 27, 0); // reset_pin = 1 SET_PORT_PIN(B, 1, 1); FCI_DELAYBYTE_MS(150); #if (0) //Code has been optimised out by the pre-processor #else // chip_sel_pin = 0 SET_PORT_PIN(A, 14, 0); #endif //Comment: //Next we write to the display registers to setup the device ready for use FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xE0); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x00); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x03); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x09); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x08); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x16); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x0A); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x3F); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x78); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x4C); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x09); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x0A); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x08); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x16); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x1A); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x0F); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xE1); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x00); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x16); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x19); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x03); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x0F); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x05); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x32); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x45); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x46); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x04); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x0E); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x0D); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x35); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x37); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x0F); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xC0); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x17); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x15); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xC1); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x47); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xC5); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x00); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x12); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x80); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x36); // .dat = 0x08 FCL_DAT = 0x08; #if (0) //Code has been optimised out by the pre-processor // #else #endif #if (1) // .dat = .dat | 0x40 FCL_DAT = FCL_DAT | 0x40; // #else //Code has been optimised out by the pre-processor #endif FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(FCL_DAT); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x3A); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x66); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x51); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0xFF); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x53); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x20); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x56); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x00); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x00); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xB0); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x00); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xB1); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0xA0); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xB4); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x02); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xB6); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x02); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x02); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x3B); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xB7); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0xC6); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0xF7); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0xA9); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x51); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x2C); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Data8(0x82); #if (0) //Code has been optimised out by the pre-processor #else FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x20); #endif FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x11); FCI_DELAYBYTE_MS(120); FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x29); FCI_DELAYBYTE_MS(25); #if 0 // Disabled code //Comment: //----!!!DEBUG!!!---- //Now read out some data to see what we are dealing with #endif // Disabled code #if 0 // Disabled code FCI_DELAYBYTE_MS(10); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x04); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCI_DELAYBYTE_MS(2); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x09); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCI_DELAYBYTE_MS(2); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x0A); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCI_DELAYBYTE_MS(2); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Write_Reg(0x0E); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code #if 0 // Disabled code FCD_01de1_gLCD_ILI9488_SPI1__LCD_Read_Data8(); #endif // Disabled code //Comment: //End of readback // fg_col_var[0] = (FGCOL) & 0xFF // fg_col_var[1] = (FGCOL >> 8) & 0xFF // fg_col_var[2] = (FGCOL >> 16) & 0xFF // bg_col_var[0] = (BGCOL) & 0xFF // bg_col_var[1] = (BGCOL >> 8) & 0xFF // bg_col_var[2] = (BGCOL >> 16) & 0xFF FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[0] = (0) & 0xFF; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[1] = (0 >> 8) & 0xFF; FCV_01de1_gLCD_ILI9488_SPI1__FG_COL_VAR[2] = (0 >> 16) & 0xFF; FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[0] = (16777215) & 0xFF; FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[1] = (16777215 >> 8) & 0xFF; FCV_01de1_gLCD_ILI9488_SPI1__BG_COL_VAR[2] = (16777215 >> 16) & 0xFF; #if (1) FCD_01de1_gLCD_ILI9488_SPI1__BacklightOn(); // #else //Code has been optimised out by the pre-processor #endif FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); } /*========================================================================*\ Use :panel :GUID: :Location: :Version: (0x0) :Timestamp: :Macro implementations \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_LadeStatus() { //Comment: //P? vej til Norge // Name: Decision, Type: Decision: FLagSleep = 1? if (FCV_FLAGSLEEP == 1) { } else { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(2, 2) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(2, 2); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Ladning:", 50, 285, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Ladning:", 9, 50, 285, 0, 1); // Name: Decision, Type: Decision: FlagLadeStatus = 1? if (FCV_FLAGLADESTATUS == 1) { // Name: Sorger for display kun skifter en gang, Type: Decision: Flagflimfjern = 2? if (FCV_FLAGFLIMFJERN == 2) { } else { // Name: Calculation, Type: Calculation: // Flagflimfjern = 2 FCV_FLAGFLIMFJERN = 2; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 155, 280, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 7, 155, 280, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("OFF!", 155, 285, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("OFF!", 5, 155, 285, 1, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 255); } } else { // Name: Decision, Type: Decision: FlagLadeStatus = 0? if (FCV_FLAGLADESTATUS == 0) { // Name: Sorger for display kun skifter en gang, Type: Decision: Flagflimfjern = 1? if (FCV_FLAGFLIMFJERN == 1) { } else { // Name: Calculation, Type: Calculation: // Flagflimfjern = 1 FCV_FLAGFLIMFJERN = 1; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 155, 285, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 7, 155, 285, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("ON!", 155, 285, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("ON!", 4, 155, 285, 1, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 255); } // } else { } } // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); } } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_TouchTest() { #if 0 // Disabled code // Name: Call Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); #endif // Disabled code #if 0 // Disabled code // Name: Call Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(2, 2) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(2, 2); #endif // Disabled code // Name: Call Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("X", 20, 10, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("X", 2, 20, 10, 1, 0); // Name: Call Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Y", 20, 40, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Y", 2, 20, 40, 1, 0); #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 0, 255); #endif // Disabled code #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 0, 0); #endif // Disabled code #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); #endif // Disabled code #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(25, 120, 150, 170, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(25, 120, 150, 170, 0, 0); #endif // Disabled code #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(25, 220, 150, 270, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(25, 220, 150, 270, 0, 0); #endif // Disabled code #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(3, 3) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(3, 3); #endif // Disabled code #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Unit 1.", 40, 130, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Unit 1.", 8, 40, 130, 2, 0); #endif // Disabled code #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Unit 2.", 40, 230, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Unit 2.", 8, 40, 230, 2, 0); #endif // Disabled code // Name: Loop, Type: Loop: While 1 while (1) { // Name: Call Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(X, 100, 10, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_X, 100, 10, 1, 1); // Name: Call Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(Y, 100, 40, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_Y, 100, 40, 1, 1); // Name: Delay, Type: Delay: 1 s FCI_DELAYBYTE_S(1); // Name: Call Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 90, 10, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 8, 90, 10, 1, 0); // Name: Call Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 90, 40, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 8, 90, 40, 1, 0); // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); #if 0 // Disabled code // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; #endif // Disabled code } } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_CalibrateKnap() { //Comment: //X > 30&&X<80&&Y<440&&Y>340 // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 0, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(20, 245, 140, 300, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(20, 245, 140, 300, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Calibr.", 24, 255, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Calibr.", 8, 24, 255, 1, 1); } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_test() { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Loop, Type: Loop: While 1 while (1) { // Name: Component Macro, Type: Component Macro: AdcIn=slider_plastic1::GetInt() FCV_ADCIN = flt_fromi(FCD_0d101_slider_plastic1__GetInt()); // Name: Component Macro, Type: Component Macro: MaxVolt=slider_plastic1::GetByte() FCV_MAXVOLT = FCD_0d101_slider_plastic1__GetByte(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(VoltString, 0, 0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(FCV_VOLTSTRING, FCVsz_VOLTSTRING, 0, 0, 0, 0); // Name: Delay, Type: Delay: 500 ms FCI_DELAYINT_MS(500); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 0, 0, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 9, 0, 0, 0, 1); // Name: Calculation, Type: Calculation: // Vooltage = AdcIn / 5500 * 30 // VoltString = FloatToString$ (Vooltage,1) + " " // VoltString = FloatToString$ (Vooltage,1) { MX_CHAR FCI_TMP_STR[MX_MAX_TMPSTR_SIZE]; FCV_VOOLTAGE = flt_mul(flt_div(FCV_ADCIN, 5500), 30); FCI_SHEAD(FCI_FLOAT_TO_STRING(FCV_VOOLTAGE, 1, FCI_TMP_STR, MX_MAX_TMPSTR_SIZE),20, " ",4, FCV_VOLTSTRING,4); FCI_FLOAT_TO_STRING(FCV_VOOLTAGE, 1, FCV_VOLTSTRING, FCVsz_VOLTSTRING); } // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 0, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 0, 0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 0, 0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(VoltString, 0, 0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(FCV_VOLTSTRING, FCVsz_VOLTSTRING, 0, 0, 0, 0); // Name: Delay, Type: Delay: 500 ms FCI_DELAYINT_MS(500); // Name: User Macro, Type: User Macro: // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(MaxVolt, 0, 100, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_MAXVOLT, 0, 100, 0, 0); // Name: Delay, Type: Delay: 500 ms FCI_DELAYINT_MS(500); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 0, 100, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 0, 100, 0, 0); } } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_SetMaxVolt() { // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Component Macro, Type: Component Macro: Minvolt=eeprom1::Read(10) FCV_MINVOLT = FCD_06651_eeprom1__Read(10); // Name: Component Macro, Type: Component Macro: Maxvolt=eeprom1::Read(11) FCV_MAXVOLT = FCD_06651_eeprom1__Read(11); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 150, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 150, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: User Macro, Type: User Macro: NEXT() FCM_NEXT(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Volt min/max bit setting!", 30, 20, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Volt min/max bit setting!", 26, 30, 20, 2, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(30, 125, 80, 170, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(30, 125, 80, 170, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(125, 125, 175, 170, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(125, 125, 175, 170, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(30, 240, 80, 285, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(30, 240, 80, 285, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(125, 240, 175, 285, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(125, 240, 175, 285, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(2, 2) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(2, 2); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Min.:", 190, 135, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Min.:", 6, 190, 135, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("-", 50, 135, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("-", 2, 50, 135, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("+", 143, 135, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("+", 2, 143, 135, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Max.:", 190, 250, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Max.:", 6, 190, 250, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("-", 50, 250, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("-", 2, 50, 250, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("+", 143, 250, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("+", 2, 143, 250, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 150, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 150, 255); // Name: Loop, Type: Loop: Until Y < 137 && Y > 40 && x < 80 && X > 25 while (1) { // Name: Plus, Type: Decision: Y < 352 && Y > 303 && X < 190 && X > 145? if (FCV_Y < 352 && FCV_Y > 303 && FCV_X < 190 && FCV_X > 145) { // Name: Calculation, Type: Calculation: // Minvolt = Minvolt + 1 FCV_MINVOLT = FCV_MINVOLT + 1; // Name: Component Macro, Type: Component Macro: eeprom1::Write(10, MinVolt) FCD_06651_eeprom1__Write(10, FCV_MINVOLT); } else { // Name: Minus, Type: Decision: Y < 440 && Y > 390 && X < 190 && X > 145? if (FCV_Y < 440 && FCV_Y > 390 && FCV_X < 190 && FCV_X > 145) { // Name: Calculation, Type: Calculation: // Minvolt = Minvolt - 1 FCV_MINVOLT = FCV_MINVOLT - 1; // Name: Component Macro, Type: Component Macro: eeprom1::Write(10, Minvolt) FCD_06651_eeprom1__Write(10, FCV_MINVOLT); } else { // Name: Plus, Type: Decision: Y < 352 && Y > 303 && X < 86 && X > 40? if (FCV_Y < 352 && FCV_Y > 303 && FCV_X < 86 && FCV_X > 40) { // Name: Calculation, Type: Calculation: // Maxvolt = Maxvolt + 1 FCV_MAXVOLT = FCV_MAXVOLT + 1; // Name: Component Macro, Type: Component Macro: eeprom1::Write(11, MaxVolt) FCD_06651_eeprom1__Write(11, FCV_MAXVOLT); } else { // Name: Minus, Type: Decision: Y < 440 && Y > 390 && X < 86 && X > 40? if (FCV_Y < 440 && FCV_Y > 390 && FCV_X < 86 && FCV_X > 40) { // Name: Calculation, Type: Calculation: // Maxvolt = Maxvolt - 1 FCV_MAXVOLT = FCV_MAXVOLT - 1; // Name: Component Macro, Type: Component Macro: eeprom1::Write(11, Maxvolt) FCD_06651_eeprom1__Write(11, FCV_MAXVOLT); // } else { } } } } // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 270, 135, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 10, 270, 135, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(MinVolt, 270, 135, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_MINVOLT, 270, 135, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 270, 252, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 8, 270, 252, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(MaxVolt, 270, 252, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_MAXVOLT, 270, 252, 0, 0); // Name: Delay, Type: Delay: 200 ms FCI_DELAYBYTE_MS(200); // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); if ((FCV_Y < 137 && FCV_Y > 40 && FCV_X < 80 && FCV_X > 25) != 0) break; } // Name: Calculation, Type: Calculation: // LysCount = 0 FCV_LYSCOUNT = 0; // Name: User Macro, Type: User Macro: Menu() FCM_Menu(); } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_PlusMinus() { //Comment: //X = 50 //Y = 45 // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 0, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(30, 240, 80, 285, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(30, 240, 80, 285, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(125, 240, 175, 285, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(125, 240, 175, 285, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(250, 240, 325, 285, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(250, 240, 325, 285, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 255, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 255, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(2, 2) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(2, 2); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Max.:", 190, 200, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Max.:", 6, 190, 200, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Min.:", 190, 250, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Min.:", 6, 190, 250, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(3, 3) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(3, 3); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("-", 50, 240, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("-", 2, 50, 240, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("+", 140, 245, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("+", 2, 140, 245, 0, 1); } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_Sleep() { // Name: Decision, Type: Decision: FLagSleep = 1? if (FCV_FLAGSLEEP == 1) { // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); // Name: Decision, Type: Decision: X < 230 && X > 100 && Y < 300 && Y > 100? if (FCV_X < 230 && FCV_X > 100 && FCV_Y < 300 && FCV_Y > 100) { // Name: C Code, Type: C Code: esp_restart(); // } else { } } else { // Name: Taeller for hvorn?r den skal g? i sleep, Type: Calculation: // LysCount = LysCount + 1 FCV_LYSCOUNT = FCV_LYSCOUNT + 1; // Name: Decision, Type: Decision: LysCount > 1000? if (FCV_LYSCOUNT > 1000) { // Name: Taeller for hvorn?r den skal g? i sleep, Type: Calculation: // FLagSleep = 1 FCV_FLAGSLEEP = 1; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::BacklightOff() FCD_01de1_gLCD_ILI9488_SPI1__BacklightOff(); // } else { } } } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_NEXT() { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 0, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 0, 0); // Name: Component Macro Originale, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(360, 245, 465, 300, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(360, 245, 465, 300, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(3, 3) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(3, 3); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Menu", 364, 255, 300, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Menu", 5, 364, 255, 300, 1); } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_Setting() { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(230, 230, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(230, 230, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(3, 3) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(3, 3); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Setting!", 150, 20, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Setting!", 9, 150, 20, 2, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(4, 4) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(4, 4); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(25, 100, 150, 150, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(25, 100, 150, 150, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(25, 170, 150, 220, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(25, 170, 150, 220, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(25, 240, 150, 290, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(25, 240, 150, 290, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(3, 3) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(3, 3); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Unit 1.", 40, 110, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Unit 1.", 8, 40, 110, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Unit 2.", 40, 180, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Unit 2.", 8, 40, 180, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Unit 3.", 40, 250, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Unit 3.", 8, 40, 250, 2, 0); #if 0 // Disabled code // Name: User Macro, Type: User Macro: TouchTest() FCM_TouchTest(); #endif // Disabled code // Name: User Macro, Type: User Macro: NEXT() FCM_NEXT(); // Name: Component Macro, Type: Component Macro: FlagUnitOne=eeprom1::Read(20) FCV_FLAGUNITONE = FCD_06651_eeprom1__Read(20); // Name: Component Macro, Type: Component Macro: FlagUnitTwo=eeprom1::Read(21) FCV_FLAGUNITTWO = FCD_06651_eeprom1__Read(21); // Name: Component Macro, Type: Component Macro: FlagUnitTree=eeprom1::Read(22) FCV_FLAGUNITTREE = FCD_06651_eeprom1__Read(22); //Comment: //Comment // Name: Decision, Type: Decision: FlagUnitOne = 1? if (FCV_FLAGUNITONE == 1) { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 110, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 6, 225, 110, 2, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("On! ", 225, 110, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("On! ", 5, 225, 110, 2, 0); } else { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 110, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 6, 225, 110, 2, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Off!", 225, 110, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Off!", 5, 225, 110, 2, 0); } // Name: Decision, Type: Decision: FlagUnitTwo = 1? if (FCV_FLAGUNITTWO == 1) { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 180, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 180, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("On!", 225, 180, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("On!", 4, 225, 180, 2, 1); } else { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 180, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 180, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Off!", 225, 180, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Off!", 5, 225, 180, 2, 1); } // Name: Decision, Type: Decision: FlagUnitTree = 1? if (FCV_FLAGUNITTREE == 1) { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 250, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 250, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("On!", 225, 250, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("On!", 4, 225, 250, 2, 1); } else { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 250, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 250, 2, 0); // Name: 250, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Off!", 225, 250, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Off!", 5, 225, 250, 2, 1); } // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Loop, Type: Loop: Until Y < 137 && Y > 40 && x < 80 && X > 25 while (1) { // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); // Name: Unit 1, Type: Decision: Y < 445 && Y > 330 && X < 212 && X > 168? if (FCV_Y < 445 && FCV_Y > 330 && FCV_X < 212 && FCV_X > 168) { // Name: Decision, Type: Decision: FlagUnitOne = 1? if (FCV_FLAGUNITONE == 1) { // Name: Calculation, Type: Calculation: // FlagUnitOne = 0 FCV_FLAGUNITONE = 0; // Name: Status hvilke unit output som er aktiv Unit et Adresse20, Type: Component Macro: eeprom1::Write(20, FlagUnitOne) FCD_06651_eeprom1__Write(20, FCV_FLAGUNITONE); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 110, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 6, 225, 110, 2, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Off! ", 225, 110, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Off! ", 6, 225, 110, 2, 0); // Name: Delay, Type: Delay: 1 s FCI_DELAYBYTE_S(1); } else { // Name: Calculation, Type: Calculation: // FlagUnitOne = 1 FCV_FLAGUNITONE = 1; // Name: Status hvilke unit output som er aktiv Unit et Adresse20, Type: Component Macro: eeprom1::Write(20, FlagUnitOne) FCD_06651_eeprom1__Write(20, FCV_FLAGUNITONE); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 110, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 6, 225, 110, 2, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("On! ", 225, 110, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("On! ", 5, 225, 110, 2, 0); // Name: Delay, Type: Delay: 1 s FCI_DELAYBYTE_S(1); } // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // } else { } // Name: Unit 2, Type: Decision: 445 && Y > 330 && X < 149 && X > 105? if (445 && FCV_Y > 330 && FCV_X < 149 && FCV_X > 105) { // Name: Decision, Type: Decision: FlagUnitTwo = 1? if (FCV_FLAGUNITTWO == 1) { // Name: Calculation, Type: Calculation: // FlagUnitTwo = 0 FCV_FLAGUNITTWO = 0; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 180, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 180, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Off!", 225, 180, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Off!", 5, 225, 180, 2, 1); // Name: Status hvilke unit output som er aktiv Unit et Adresse21, Type: Component Macro: eeprom1::Write(21, FlagUnitTwo) FCD_06651_eeprom1__Write(21, FCV_FLAGUNITTWO); // Name: Delay, Type: Delay: 1 s FCI_DELAYBYTE_S(1); } else { // Name: Calculation, Type: Calculation: // FlagUnitTwo = 1 FCV_FLAGUNITTWO = 1; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 180, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 180, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("On!", 225, 180, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("On!", 4, 225, 180, 2, 1); // Name: Status hvilke unit output som er aktiv Unit et Adresse21, Type: Component Macro: eeprom1::Write(21, FlagUnitTwo) FCD_06651_eeprom1__Write(21, FCV_FLAGUNITTWO); // Name: Delay, Type: Delay: 1 s FCI_DELAYBYTE_S(1); } // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // } else { } // Name: Unit 2, Type: Decision: Y < 445 && Y > 330 && X < 85 && X > 40? if (FCV_Y < 445 && FCV_Y > 330 && FCV_X < 85 && FCV_X > 40) { // Name: Decision, Type: Decision: FlagUnitTree = 1? if (FCV_FLAGUNITTREE == 1) { // Name: Calculation, Type: Calculation: // FlagUnitTree = 0 FCV_FLAGUNITTREE = 0; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 250, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 250, 2, 0); // Name: 250, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Off!", 225, 250, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Off!", 5, 225, 250, 2, 1); // Name: Status hvilke unit output som er aktiv Unit et Adresse21, Type: Component Macro: eeprom1::Write(22, FlagUnitTree) FCD_06651_eeprom1__Write(22, FCV_FLAGUNITTREE); // Name: Delay, Type: Delay: 1 s FCI_DELAYBYTE_S(1); } else { // Name: Calculation, Type: Calculation: // FlagUnitTree = 1 FCV_FLAGUNITTREE = 1; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 250, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 250, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("On!", 225, 250, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("On!", 4, 225, 250, 2, 1); // Name: Status hvilke unit output som er aktiv Unit et Adresse21, Type: Component Macro: eeprom1::Write(22, FlagUnitTree) FCD_06651_eeprom1__Write(22, FCV_FLAGUNITTREE); // Name: Delay, Type: Delay: 1 s FCI_DELAYBYTE_S(1); } // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // } else { } if ((FCV_Y < 137 && FCV_Y > 40 && FCV_X < 80 && FCV_X > 25) != 0) break; } // Name: Calculation, Type: Calculation: // LysCount = 0 FCV_LYSCOUNT = 0; // Name: User Macro, Type: User Macro: Menu() FCM_Menu(); } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_VoltAmp() { // Name: Component Macro, Type: Component Macro: Minvolt=eeprom1::Read(10) FCV_MINVOLT = FCD_06651_eeprom1__Read(10); // Name: Component Macro, Type: Component Macro: Maxvolt=eeprom1::Read(11) FCV_MAXVOLT = FCD_06651_eeprom1__Read(11); //Comment: //0.735000 //910 // Name: Decision, Type: Decision: ScreenFlag = 1? if (FCV_SCREENFLAG == 1) { #if 0 // Disabled code // Name: Calculation, Type: Calculation: // LysCount = 0 FCV_LYSCOUNT = 0; #endif // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 0, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); #if 0 // Disabled code // Name: User Macro, Type: User Macro: PlusMinus() FCM_PlusMinus(); #endif // Disabled code #if 0 // Disabled code // Name: User Macro, Type: User Macro: VoltSaveScaler() FCM_VoltSaveScaler(); #endif // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Amp:", 40, 30, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Amp:", 5, 40, 30, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(300, 20, 400, 100, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(300, 20, 400, 100, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Volt:", 40, 125, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Volt:", 6, 40, 125, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Volt bit:", 40, 240, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Volt bit:", 10, 40, 240, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(300, 110, 400, 190, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(300, 110, 400, 190, 0, 1); // Name: User Macro, Type: User Macro: NEXT() FCM_NEXT(); // Name: Calculation, Type: Calculation: // Count = 200 FCV_COUNT = 200; // Name: Calculation, Type: Calculation: // Y = 0 // X = 0 FCV_Y = 0; FCV_X = 0; // Name: Loop, Type: Loop: Until Y < 137 && Y > 40 && x < 80 && X > 25 while (1) { // Name: Component Macro, Type: Component Macro: AdcIn=slider_plastic1::GetInt() FCV_ADCIN = flt_fromi(FCD_0d101_slider_plastic1__GetInt()); // Name: Component Macro, Type: Component Macro: Voltbit=slider_plastic1::GetByte() FCV_VOLTBIT = FCD_0d101_slider_plastic1__GetByte(); // Name: Calculation, Type: Calculation: // //Vooltage = AdcIn * 3.3 / (4094 / 100) * 4 // Vooltage = AdcIn / 5500 * 30 //* (15942 / 16000) // VoltString = FloatToString$ (Vooltage,1) + " " // //Vooltage = AdcIn / 5000 * 27 // VoltString = FloatToString$ (Vooltage,1) { MX_CHAR FCI_TMP_STR[MX_MAX_TMPSTR_SIZE]; FCV_VOOLTAGE = flt_mul(flt_div(FCV_ADCIN, 5500), 30); FCI_SHEAD(FCI_FLOAT_TO_STRING(FCV_VOOLTAGE, 1, FCI_TMP_STR, MX_MAX_TMPSTR_SIZE),20, " ",4, FCV_VOLTSTRING,4); FCI_FLOAT_TO_STRING(FCV_VOOLTAGE, 1, FCV_VOLTSTRING, FCVsz_VOLTSTRING); } // Name: Component Macro, Type: Component Macro: AmpFloat=ACS7xx_Current_Sensor1::Current() FCV_AMPFLOAT = FCD_0f961_ACS7xx_Current_Sensor1__Current(); // Name: Calculation, Type: Calculation: // AmpString = FloatToString$ (AmpFloat,1) // AmpString = AmpString //+ " " // //Ampstring = ToString$ (AmpAcsInt) FCI_FLOAT_TO_STRING(FCV_AMPFLOAT, 1, FCV_AMPSTRING, FCVsz_AMPSTRING); FCI_SCOPY(FCV_AMPSTRING,FCVsz_AMPSTRING, FCV_AMPSTRING,FCVsz_AMPSTRING); // Name: Decision, Type: Decision: Count >= 200? if (FCV_COUNT >= 200) { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 255, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 320, 40, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 6, 320, 40, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(AmpString, 320, 40, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print(FCV_AMPSTRING, FCVsz_AMPSTRING, 320, 40, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 255, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 370, 130, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 2, 370, 130, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(VoltString, 320, 130, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(FCV_VOLTSTRING, FCVsz_VOLTSTRING, 320, 130, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 200, 230, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 7, 200, 230, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(Voltbit, 200, 230, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_VOLTBIT, 200, 230, 0, 0); // Name: Calculation, Type: Calculation: // Count = 0 FCV_COUNT = 0; // Name: Decision, Type: Decision: Voltbit >= MaxVolt? if (FCV_VOLTBIT >= FCV_MAXVOLT) { // Name: Ladning OFF, Type: Output: 0 -> pin13 SET_PORT_PIN(A,13,(0)); } else { // Name: Decision, Type: Decision: Voltbit <= Minvolt? if (FCV_VOLTBIT <= FCV_MINVOLT) { // Name: Ladning ON, Type: Output: 1 -> pin13 SET_PORT_PIN(A,13,(1)); // } else { } } } else { // Name: Calculation, Type: Calculation: // Count = Count + 1 FCV_COUNT = FCV_COUNT + 1; } // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); if ((FCV_Y < 137 && FCV_Y > 40 && FCV_X < 80 && FCV_X > 25) != 0) break; } // Name: Calculation, Type: Calculation: // LysCount = 0 FCV_LYSCOUNT = 0; // Name: Calculation, Type: Calculation: // ScreenFlag = 100 FCV_SCREENFLAG = 100; // Name: User Macro, Type: User Macro: Menu() FCM_Menu(); } else { // Name: Component Macro, Type: Component Macro: AdcIn=slider_plastic1::GetInt() FCV_ADCIN = flt_fromi(FCD_0d101_slider_plastic1__GetInt()); // Name: Calculation, Type: Calculation: // //Vooltage = AdcIn * 3.3 / (4094 / 100) * 4 // Vooltage = AdcIn / 5500 * 30 //* (15942 / 16000) // VoltString = FloatToString$ (Vooltage,1) + " " // //Vooltage = AdcIn / 5000 * 27 // VoltString = FloatToString$ (Vooltage,1) { MX_CHAR FCI_TMP_STR[MX_MAX_TMPSTR_SIZE]; FCV_VOOLTAGE = flt_mul(flt_div(FCV_ADCIN, 5500), 30); FCI_SHEAD(FCI_FLOAT_TO_STRING(FCV_VOOLTAGE, 1, FCI_TMP_STR, MX_MAX_TMPSTR_SIZE),20, " ",4, FCV_VOLTSTRING,4); FCI_FLOAT_TO_STRING(FCV_VOOLTAGE, 1, FCV_VOLTSTRING, FCVsz_VOLTSTRING); } // Name: Component Macro, Type: Component Macro: AmpFloat=ACS7xx_Current_Sensor1::Current() FCV_AMPFLOAT = FCD_0f961_ACS7xx_Current_Sensor1__Current(); // Name: Calculation, Type: Calculation: // AmpString = FloatToString$ (AmpFloat,1) // AmpString = AmpString //+ " " // //Ampstring = ToString$ (AmpAcsInt) FCI_FLOAT_TO_STRING(FCV_AMPFLOAT, 1, FCV_AMPSTRING, FCVsz_AMPSTRING); FCI_SCOPY(FCV_AMPSTRING,FCVsz_AMPSTRING, FCV_AMPSTRING,FCVsz_AMPSTRING); // Name: Component Macro, Type: Component Macro: Voltbit=slider_plastic1::GetByte() FCV_VOLTBIT = FCD_0d101_slider_plastic1__GetByte(); // Name: Decision, Type: Decision: Voltbit >= MaxVolt? if (FCV_VOLTBIT >= FCV_MAXVOLT) { // Name: Til display info . se LadeStatus, Type: Calculation: // FlagLadeStatus = 1 FCV_FLAGLADESTATUS = 1; // Name: Ladning OFF, Type: Output: 0 -> pin13 SET_PORT_PIN(A,13,(0)); } else { // Name: Decision, Type: Decision: Voltbit <= Minvolt? if (FCV_VOLTBIT <= FCV_MINVOLT) { // Name: Ladning ON, Type: Output: 1 -> pin13 SET_PORT_PIN(A,13,(1)); // Name: Calculation, Type: Calculation: // FlagLadeStatus = 0 FCV_FLAGLADESTATUS = 0; // } else { } } // Name: User Macro, Type: User Macro: LadeStatus() FCM_LadeStatus(); } // Name: Calculation, Type: Calculation: // Y = 0 // X = 0 FCV_Y = 0; FCV_X = 0; //Comment: //P? vej til Norge } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_Lysstatus() { #if 0 // Disabled code // Name: Decision, Type: Decision: FLagSleep = 0? if (FCV_FLAGSLEEP == 0) { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Dag/nat:", 25, 270, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Dag/nat:", 9, 25, 270, 0, 1); // } else { } #endif // Disabled code #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Dag!", 130, 270, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Dag!", 5, 130, 270, 1, 1); #endif // Disabled code // Name: Decision, Type: Decision: FlagLysStatus = 1? if (FCV_FLAGLYSSTATUS == 1) { // Name: Sorger for display kun skifter en gang, Type: Decision: FlagLysFlimFjern = 2? if (FCV_FLAGLYSFLIMFJERN == 2) { } else { // Name: Calculation, Type: Calculation: // FlagLysFlimFjern = 2 FCV_FLAGLYSFLIMFJERN = 2; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 130, 270, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 8, 130, 270, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("NAT!", 130, 270, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("NAT!", 5, 130, 270, 1, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 255); } } else { #if 0 // Disabled code // Name: Decision, Type: Decision: FlagLysStatus = 0 && FLagSleep = 0? if (FCV_FLAGLYSSTATUS == 0 && FCV_FLAGSLEEP == 0) { // Name: Sorger for display kun skifter en gang, Type: Decision: FlagLysFlimFjern = 1? if (FCV_FLAGLYSFLIMFJERN == 1) { } else { // Name: Calculation, Type: Calculation: // FlagLysFlimFjern = 1 FCV_FLAGLYSFLIMFJERN = 1; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 130, 270, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 7, 130, 270, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("DAG!", 130, 270, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("DAG!", 5, 130, 270, 1, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 255); } // } else { } #endif // Disabled code } // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); #if 0 // Disabled code // Name: Decision, Type: Decision: FLagSleep = 1? if (FCV_FLAGSLEEP == 1) { // } else { } #endif // Disabled code } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_Test_Out() { // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(230, 230, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(230, 230, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(4, 4) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(4, 4); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Test out!", 150, 20, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Test out!", 10, 150, 20, 2, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(25, 175, 150, 255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(25, 175, 150, 255, 0, 0); #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(25, 190, 150, 270, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(25, 190, 150, 270, 0, 0); #endif // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Start!", 30, 190, 2, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Start!", 7, 30, 190, 2, 1); // Name: User Macro, Type: User Macro: NEXT() FCM_NEXT(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 225, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 225, 0); // Name: Loop, Type: Loop: Until Y < 137 && Y > 40 && x < 80 && X > 25 while (1) { // Name: Decision, Type: Decision: Y < 438 && Y > 327 && X < 142 && X > 70? if (FCV_Y < 438 && FCV_Y > 327 && FCV_X < 142 && FCV_X > 70) { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(25, 175, 150, 255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(25, 175, 150, 255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(4, 4) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(4, 4); #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 30, 190, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 7, 30, 190, 2, 0); #endif // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Stop!", 30, 190, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Stop!", 6, 30, 190, 2, 0); // Name: Delay, Type: Delay: 200 ms FCI_DELAYBYTE_MS(200); // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Loop, Type: Loop: Until Y < 438 && Y > 327 && X < 142 && X > 70 while (1) { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 195, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 6, 225, 195, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("ON!", 235, 195, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("ON!", 4, 235, 195, 2, 0); // Name: Lys ude ON, Type: Output: 1 -> pin25 SET_PORT_PIN(A,25,(1)); // Name: Lys ude ON, Type: Output: 1 -> pin32 SET_PORT_PIN(B,0,(1)); // Name: Lys ude ON, Type: Output: 1 -> pin1 SET_PORT_PIN(A,1,(1)); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawCircle(400, 150, 25, 270, 1) FCD_01de1_gLCD_ILI9488_SPI1__DrawCircle(400, 150, 25, 270, 1); // Name: Delay, Type: Delay: 300 ms FCI_DELAYINT_MS(300); // Name: Lys ude OFF, Type: Output: 0 -> pin25 SET_PORT_PIN(A,25,(0)); // Name: Lys ude OFF, Type: Output: 0 -> pin32 SET_PORT_PIN(B,0,(0)); // Name: Lys ude OFF, Type: Output: 0 -> pin1 SET_PORT_PIN(A,1,(0)); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 195, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 195, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("OFF!", 230, 195, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("OFF!", 5, 230, 195, 2, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawCircle(400, 150, 25, 270, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawCircle(400, 150, 25, 270, 0); // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); // Name: Delay, Type: Delay: 300 ms FCI_DELAYINT_MS(300); if ((FCV_Y < 438 && FCV_Y > 327 && FCV_X < 142 && FCV_X > 70) != 0) break; } // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 225, 195, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 5, 225, 195, 2, 0); #endif // Disabled code #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("OFF!", 230, 195, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("OFF!", 5, 230, 195, 2, 0); #endif // Disabled code // Name: Lys ude OFF, Type: Output: 0 -> pin25 SET_PORT_PIN(A,25,(0)); // Name: Lys ude OFF, Type: Output: 0 -> pin32 SET_PORT_PIN(B,0,(0)); // Name: User Macro, Type: User Macro: Test_Out() FCM_Test_Out(); // Name: Delay, Type: Delay: 300 ms FCI_DELAYINT_MS(300); // } else { } #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(230, 230, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(230, 230, 255); #endif // Disabled code #if 0 // Disabled code // Name: Delay, Type: Delay: 1 s FCI_DELAYBYTE_S(1); #endif // Disabled code // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); if ((FCV_Y < 137 && FCV_Y > 40 && FCV_X < 80 && FCV_X > 25) != 0) break; } // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Calculation, Type: Calculation: // LysCount = 0 FCV_LYSCOUNT = 0; // Name: User Macro, Type: User Macro: Menu() FCM_Menu(); } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_Touch() { // Name: Component Macro, Type: Component Macro: Touch=XPT2046::SampleSensor() FCV_TOUCH = FCD_06ae1_XPT2046__SampleSensor(); // Name: Decision, Type: Decision: Touch? if (FCV_TOUCH) { // Name: Component Macro, Type: Component Macro: X=XPT2046::ReadCoord(0) FCV_X = FCD_06ae1_XPT2046__ReadCoord(0); // Name: Component Macro, Type: Component Macro: Y=XPT2046::ReadCoord(1) FCV_Y = FCD_06ae1_XPT2046__ReadCoord(1); // } else { } } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_Menu() { // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Menu!", 190, 20, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Menu!", 6, 190, 20, 1, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); //Comment: //Comment // Name: Component Macro Originale, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(40, 90, 140, 160, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(40, 90, 140, 160, 1, 0); //Comment: //Comment // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(40, 200, 140, 270, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(40, 200, 140, 270, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(195, 90, 295, 160, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(195, 90, 295, 160, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(195, 200, 295, 270, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(195, 200, 295, 270, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(345, 90, 445, 160, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(345, 90, 445, 160, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(345, 90, 445, 160, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(345, 90, 445, 160, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::DrawRectangle(345, 200, 445, 275, 1, 0) FCD_01de1_gLCD_ILI9488_SPI1__DrawRectangle(345, 200, 445, 275, 1, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(2, 2) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(2, 2); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Volt/A", 52, 112, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Volt/A", 7, 52, 112, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Set. lys", 202, 112, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Set. lys", 9, 202, 112, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Test out", 346, 112, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Test out", 9, 346, 112, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Ajd.volt.", 45, 225, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Ajd.volt.", 10, 45, 225, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Unit.", 220, 225, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Unit.", 6, 220, 225, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Vers.", 362, 225, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Vers.", 6, 362, 225, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::BacklightOn() FCD_01de1_gLCD_ILI9488_SPI1__BacklightOn(); // Name: Delay, Type: Delay: 200 ms FCI_DELAYBYTE_MS(200); //Comment: //Comment #if 0 // Disabled code // Name: User Macro, Type: User Macro: Setting() FCM_Setting(); #endif // Disabled code // Name: Loop, Type: Loop: While 1 while (1) { // Name: Volt_Ampere, Type: Decision: X < 222 && X > 158 && Y < 430 && Y > 335? if (FCV_X < 222 && FCV_X > 158 && FCV_Y < 430 && FCV_Y > 335) { // Name: Calculation, Type: Calculation: // ScreenFlag = 1 FCV_SCREENFLAG = 1; // Name: User Macro, Type: User Macro: VoltAmp() FCM_VoltAmp(); // Name: Taeller for hvorn?r den skal g? i sleep, Type: Calculation: // LysCount = 0 // FlagLadeStatus = 10 FCV_LYSCOUNT = 0; FCV_FLAGLADESTATUS = 10; } else { // Name: Set_Lys, Type: Decision: X < 222 && X > 158 && Y < 280 && Y > 187? if (FCV_X < 222 && FCV_X > 158 && FCV_Y < 280 && FCV_Y > 187) { // Name: Calculation, Type: Calculation: // ScreenFlag = 2 FCV_SCREENFLAG = 2; // Name: User Macro, Type: User Macro: Lyssensor() FCM_Lyssensor(); // Name: Taeller for hvorn?r den skal g? i sleep, Type: Calculation: // LysCount = 0 // FlagLadeStatus = 1 FCV_LYSCOUNT = 0; FCV_FLAGLADESTATUS = 1; } else { // Name: Test_Out, Type: Decision: X < 224 && X > 158 && Y < 140 && Y > 46? if (FCV_X < 224 && FCV_X > 158 && FCV_Y < 140 && FCV_Y > 46) { // Name: User Macro, Type: User Macro: Test_Out() FCM_Test_Out(); // Name: Taeller for hvorn?r den skal g? i sleep, Type: Calculation: // LysCount = 0 // FlagLadeStatus = 1 FCV_LYSCOUNT = 0; FCV_FLAGLADESTATUS = 1; } else { // Name: Ajd_Volt, Type: Decision: X > 58 && X < 120 && Y < 430 && Y > 330? if (FCV_X > 58 && FCV_X < 120 && FCV_Y < 430 && FCV_Y > 330) { // Name: User Macro, Type: User Macro: SetMaxVolt() FCM_SetMaxVolt(); // Name: Taeller for hvorn?r den skal g? i sleep, Type: Calculation: // LysCount = 0 // FlagLadeStatus = 1 FCV_LYSCOUNT = 0; FCV_FLAGLADESTATUS = 1; } else { // Name: Setting, Type: Decision: X > 58 && X < 120 && Y < 280 && Y > 186? if (FCV_X > 58 && FCV_X < 120 && FCV_Y < 280 && FCV_Y > 186) { // Name: User Macro, Type: User Macro: Setting() FCM_Setting(); // Name: Taeller for hvorn?r den skal g? i sleep, Type: Calculation: // LysCount = 0 // FlagLadeStatus = 1 FCV_LYSCOUNT = 0; FCV_FLAGLADESTATUS = 1; } else { // Name: Ledig, Type: Decision: X > 58 && X < 120 && Y < 140 && Y > 45? if (FCV_X > 58 && FCV_X < 120 && FCV_Y < 140 && FCV_Y > 45) { // Name: User Macro, Type: User Macro: Version() FCM_Version(); // Name: Taeller for hvorn?r den skal g? i sleep, Type: Calculation: // LysCount = 0 // FlagLadeStatus = 1 FCV_LYSCOUNT = 0; FCV_FLAGLADESTATUS = 1; // } else { } } } } } } // Name: User Macro, Type: User Macro: VoltAmp() FCM_VoltAmp(); // Name: User Macro, Type: User Macro: Lyssensor() FCM_Lyssensor(); // Name: User Macro, Type: User Macro: Sleep() FCM_Sleep(); // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); } // Name: Calculation, Type: Calculation: // LysCount = 0 FCV_LYSCOUNT = 0; } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_Lyssensor() { // Name: Component Macro, Type: Component Macro: EpromSave=eeprom1::Read(0) FCV_EPROMSAVE = FCD_06651_eeprom1__Read(0); // Name: Component Macro, Type: Component Macro: AmbientLight1::ChangeMeasurementTime(69) FCD_0f391_AmbientLight1__ChangeMeasurementTime(69); // Name: Component Macro, Type: Component Macro: Amb=AmbientLight1::ReadMeasurement() FCV_AMB = FCD_0f391_AmbientLight1__ReadMeasurement(); // Name: Decision, Type: Decision: ScreenFlag = 2? if (FCV_SCREENFLAG == 2) { // Name: Component Macro, Type: Component Macro: AmbientLight1::ContinuousMeasurement(0) FCD_0f391_AmbientLight1__ContinuousMeasurement(0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 255, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 255, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Lys bits. Value:", 10, 50, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Lys bits. Value:", 17, 10, 50, 0, 1); #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Lys bits. Min:", 10, 100, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Lys bits. Min:", 15, 10, 100, 0, 1); #endif // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Lys bits offset:", 10, 150, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Lys bits offset:", 17, 10, 150, 0, 1); // Name: User Macro, Type: User Macro: NEXT() FCM_NEXT(); // Name: User Macro, Type: User Macro: CalibrateKnap() FCM_CalibrateKnap(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 255, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 255, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(EpromSave, 330, 150, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_EPROMSAVE, 330, 150, 0, 1); // Name: Calculation, Type: Calculation: // Count = 0 FCV_COUNT = 0; // Name: Loop, Type: Loop: Until Y < 137 && Y > 40 && x < 80 && X > 25 while (1) { // Name: Calculation, Type: Calculation: // Count = Count + 1 FCV_COUNT = FCV_COUNT + 1; // Name: Count > 100, Type: Decision: Count > 25? if (FCV_COUNT > 25) { // Name: Component Macro, Type: Component Macro: AmbientLight1::ChangeMeasurementTime(69) FCD_0f391_AmbientLight1__ChangeMeasurementTime(69); // Name: Component Macro, Type: Component Macro: Amb=AmbientLight1::ReadMeasurement() FCV_AMB = FCD_0f391_AmbientLight1__ReadMeasurement(); // Name: Calculation, Type: Calculation: // Count = 0 // //Amb = Amb / 2 // //Ellers 3 FCV_COUNT = 0; // Name: Calculation, Type: Calculation: // LightString = ToString$ (Amb) + " " { MX_CHAR FCI_TMP_STR[MX_MAX_TMPSTR_SIZE]; FCI_SHEAD(FCI_TOSTRING(FCV_AMB, FCI_TMP_STR,MX_MAX_TMPSTR_SIZE),20, " ",6, FCV_LIGHTSTRING,20); } #if 0 // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 330, 50, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 9, 330, 50, 0, 0); #endif // Disabled code // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(LightString, 330, 50, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print(FCV_LIGHTSTRING, FCVsz_LIGHTSTRING, 330, 50, 0, 0); } else { // Name: Kalibrering, Type: Decision: X > 30 && X < 80 && Y < 440 && Y > 340? if (FCV_X > 30 && FCV_X < 80 && FCV_Y < 440 && FCV_Y > 340) { // Name: Component Macro, Type: Component Macro: AmbientLight1::ChangeMeasurementTime(69) FCD_0f391_AmbientLight1__ChangeMeasurementTime(69); // Name: Component Macro, Type: Component Macro: Amb=AmbientLight1::ReadMeasurement() FCV_AMB = FCD_0f391_AmbientLight1__ReadMeasurement(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(2, 2) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(2, 2); // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Calculation, Type: Calculation: // EpromSave = Amb FCV_EPROMSAVE = FCV_AMB; // Name: Component Macro, Type: Component Macro: eeprom1::WriteByte(0, EpromSave) FCD_06651_eeprom1__WriteByte(0, FCV_EPROMSAVE); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Calibratet:", 160, 260, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Calibratet:", 12, 160, 260, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(EpromSave, 285, 260, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_EPROMSAVE, 285, 260, 0, 0); // Name: Delay, Type: Delay: 500 ms FCI_DELAYINT_MS(500); // Name: Loop, Type: Loop: Until Y < 137 && Y > 40 && x < 80 && X > 25 while (1) { // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); if ((FCV_Y < 137 && FCV_Y > 40 && FCV_X < 80 && FCV_X > 25) != 0) break; } // Name: Component Macro, Type: Component Macro: EpromSave=eeprom1::Read(0) FCV_EPROMSAVE = FCD_06651_eeprom1__Read(0); // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(3, 3) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(3, 3); // Name: User Macro, Type: User Macro: Lyssensor() FCM_Lyssensor(); // } else { } } // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); // Name: Delay, Type: Delay: 10 ms FCI_DELAYBYTE_MS(10); // Name: Decision, Type: Decision: Amb <= EpromSave? if (FCV_AMB <= FCV_EPROMSAVE) { // Name: Lys ude ON, Type: Output: 1 -> pin25 SET_PORT_PIN(A,25,(1)); } else { // Name: Lys ude OFF, Type: Output: 0 -> pin25 SET_PORT_PIN(A,25,(0)); } if ((FCV_Y < 137 && FCV_Y > 40 && FCV_X < 80 && FCV_X > 25) != 0) break; } // Name: Saetter flaget til andet end 1 eller 2 som i Lysstaus, Type: Calculation: // FlagLysFlimFjern = 100 FCV_FLAGLYSFLIMFJERN = 100; // Name: Saetter flaget til andet end 1 eller 2 som i Lysstaus, Type: Calculation: // LysCount = 0 FCV_LYSCOUNT = 0; // Name: Calculation, Type: Calculation: // ScreenFlag = 100 FCV_SCREENFLAG = 100; // Name: User Macro, Type: User Macro: Menu() FCM_Menu(); } else { // Name: Decision, Type: Decision: Amb <= EpromSave? if (FCV_AMB <= FCV_EPROMSAVE) { // Name: Calculation, Type: Calculation: // FlagLysStatus = 1 FCV_FLAGLYSSTATUS = 1; // Name: User Macro, Type: User Macro: Nat() FCM_Nat(); } else { // Name: Calculation, Type: Calculation: // FlagLysStatus = 0 FCV_FLAGLYSSTATUS = 0; } } // Name: Calculation, Type: Calculation: // Count = 101 FCV_COUNT = 101; // Name: Calculation, Type: Calculation: // X = 0 // Y = 0 FCV_X = 0; FCV_Y = 0; // Name: Calculation, Type: Calculation: // ScreenFlag = 100 FCV_SCREENFLAG = 100; } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_VoltSaveScaler() { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print(" ", 272, 252, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print(" ", 6, 272, 252, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(2, 2) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(2, 2); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(VoltOffset, 278, 252, 0, 1) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_VOLTOFFSET, 278, 252, 0, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::PrintNumber(Voltmax, 278, 200, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__PrintNumber(FCV_VOLTMAX, 278, 200, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(3, 3) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(3, 3); } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_Nat() { // Name: Ladning OFF, Type: Output: 0 -> pin13 SET_PORT_PIN(A,13,(0)); // Name: Decision, Type: Decision: FlagUnitOne = 1? if (FCV_FLAGUNITONE == 1) { // Name: Lys ude ON, Type: Output: 1 -> pin25 SET_PORT_PIN(A,25,(1)); // } else { } // Name: Decision, Type: Decision: FlagUnitTwo = 1? if (FCV_FLAGUNITTWO == 1) { // Name: Lys ude ON, Type: Output: 1 -> pin32 SET_PORT_PIN(B,0,(1)); // } else { } // Name: Decision, Type: Decision: FlagUnitTree = 1? if (FCV_FLAGUNITTREE == 1) { // Name: Lys ude ON, Type: Output: 1 -> pin1 SET_PORT_PIN(A,1,(1)); // } else { } // Name: Calculation, Type: Calculation: // Sekund = 0 // Minut = 0 FCV_SEKUND = 0; FCV_MINUT = 0; // Name: Faar ladestatus resat efter det har v?ret nat. Se ladestatus, Type: Calculation: // FlagLadeStatus = 4 // Flagflimfjern = 4 FCV_FLAGLADESTATUS = 4; FCV_FLAGFLIMFJERN = 4; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(7, 7) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(7, 7); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::BacklightOn() FCD_01de1_gLCD_ILI9488_SPI1__BacklightOn(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Godnat!", 75, 100, 2, 0) FCD_01de1_gLCD_ILI9488_SPI1__Print("Godnat!", 8, 75, 100, 2, 0); // Name: Delay, Type: Delay: 5 s FCI_DELAYBYTE_S(5); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::BacklightOff() FCD_01de1_gLCD_ILI9488_SPI1__BacklightOff(); // Name: Taeller for hvorn?r den skal g? i sleep, Type: Calculation: // FLagSleep = 0 FCV_FLAGSLEEP = 0; // Name: Loop, Type: Loop: Until Amb > 500 && Sekund > 4 while (1) { // Name: Delay, Type: Delay: 1 s FCI_DELAYBYTE_S(1); // Name: Calculation, Type: Calculation: // Sekund = Sekund + 1 FCV_SEKUND = FCV_SEKUND + 1; // Name: Tid for sluk lys, Type: Decision: Sekund > 4? if (FCV_SEKUND > 4) { // Name: Lys ude OFF, Type: Output: 0 -> pin25 SET_PORT_PIN(A,25,(0)); // Name: Lys ude OFF, Type: Output: 0 -> pin32 SET_PORT_PIN(B,0,(0)); // Name: Lys ude OFF, Type: Output: 0 -> pin1 SET_PORT_PIN(A,1,(0)); // } else { } #if 0 // Disabled code // Name: Decision, Type: Decision: Sekund > 59? if (FCV_SEKUND > 59) { // Name: Calculation, Type: Calculation: // Sekund = 0 // Minut = Minut + 1 FCV_SEKUND = 0; FCV_MINUT = FCV_MINUT + 1; // Name: Decision, Type: Decision: Minut > 240? if (FCV_MINUT > 240) { // Name: Calculation, Type: Calculation: // Sekund = 0 FCV_SEKUND = 0; // Name: Lys ude OFF, Type: Output: 0 -> pin25 SET_PORT_PIN(A,25,(0)); // Name: Lys ude OFF, Type: Output: 0 -> pin32 SET_PORT_PIN(B,0,(0)); // } else { } } else { #if 0 // Disabled code // Name: Delay, Type: Delay: 100 ms FCI_DELAYBYTE_MS(100); #endif // Disabled code #if 0 // Disabled code // Name: Lys ude ON, Type: Output: 1 -> pin25 SET_PORT_PIN(A,25,(1)); #endif // Disabled code #if 0 // Disabled code // Name: Delay, Type: Delay: 100 ms FCI_DELAYBYTE_MS(100); #endif // Disabled code #if 0 // Disabled code // Name: Lys ude OFF, Type: Output: 0 -> pin25 SET_PORT_PIN(A,25,(0)); #endif // Disabled code } #endif // Disabled code // Name: Component Macro, Type: Component Macro: AmbientLight1::ChangeMeasurementTime(69) FCD_0f391_AmbientLight1__ChangeMeasurementTime(69); // Name: Component Macro, Type: Component Macro: Amb=AmbientLight1::ReadMeasurement() FCV_AMB = FCD_0f391_AmbientLight1__ReadMeasurement(); if ((FCV_AMB > 500 && FCV_SEKUND > 4) != 0) break; } // Name: Lys ude OFF, Type: Output: 0 -> pin25 SET_PORT_PIN(A,25,(0)); // Name: C Code, Type: C Code: esp_restart(); } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_FrontValg() { // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(3, 3) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(3, 3); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Solcelle lade controller.", 40, 50, 300, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Solcelle lade controller.", 26, 40, 50, 300, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("J. Gundorph.", 130, 170, 300, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("J. Gundorph.", 13, 130, 170, 300, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 0, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 0, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 0, 0); // Name: Calculation, Type: Calculation: // ScreenFlag = 0 FCV_SCREENFLAG = 0; // Name: Calculation, Type: Calculation: // Flagflimfjern = 0 FCV_FLAGFLIMFJERN = 0; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(255, 255, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(255, 255, 255); // Name: Component Macro, Type: Component Macro: AmbientLight1::ContinuousMeasurement(0) FCD_0f391_AmbientLight1__ContinuousMeasurement(0); // Name: Calculation, Type: Calculation: // Y = 0 // X = 0 FCV_Y = 0; FCV_X = 0; // Name: Delay, Type: Delay: 1500 ms FCI_DELAYINT_MS(1500); // Name: Calculation, Type: Calculation: // FlagLadeStatus = 10 FCV_FLAGLADESTATUS = 10; // Name: User Macro, Type: User Macro: Menu() FCM_Menu(); } /*=----------------------------------------------------------------------=*\ Use : \*=----------------------------------------------------------------------=*/ void FCM_Version() { // Name: Calculation, Type: Calculation: // Y = 0 // X = 0 FCV_Y = 0; FCV_X = 0; // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(0, 150, 255) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(0, 150, 255); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetForegroundColour(0, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetForegroundColour(0, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(4, 4) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(4, 4); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("Version 10.2", 60, 50, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("Version 10.2", 13, 60, 50, 1, 1); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Print("28-05-2023", 60, 200, 1, 1) FCD_01de1_gLCD_ILI9488_SPI1__Print("28-05-2023", 11, 60, 200, 1, 1); // Name: User Macro, Type: User Macro: NEXT() FCM_NEXT(); // Name: Loop, Type: Loop: Until Y < 137 && Y > 40 && x < 80 && X > 25 while (1) { // Name: User Macro, Type: User Macro: Touch() FCM_Touch(); if ((FCV_Y < 137 && FCV_Y > 40 && FCV_X < 80 && FCV_X > 25) != 0) break; } // Name: Calculation, Type: Calculation: // Y = 0 // X = 0 FCV_Y = 0; FCV_X = 0; // Name: Calculation, Type: Calculation: // LysCount = 0 FCV_LYSCOUNT = 0; // Name: User Macro, Type: User Macro: Menu() FCM_Menu(); } /*========================================================================*\ Use :Main \*========================================================================*/ void app_main() { // Initialize NVS esp_err_t ret = nvs_flash_init(); if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) { ESP_ERROR_CHECK(nvs_flash_erase()); ret = nvs_flash_init(); } ESP_ERROR_CHECK( ret ); ESP_ERROR_CHECK(esp_event_loop_create_default()); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::Initialise() FCD_01de1_gLCD_ILI9488_SPI1__Initialise(); // Name: Component Macro, Type: Component Macro: XPT2046::Initialise() FCD_06ae1_XPT2046__Initialise(); // Name: Component Macro, Type: Component Macro: AmbientLight1::Initialise() FCD_0f391_AmbientLight1__Initialise(); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetBackgroundColour(255, 0, 0) FCD_01de1_gLCD_ILI9488_SPI1__SetBackgroundColour(255, 0, 0); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetDisplayOrientation(1) FCD_01de1_gLCD_ILI9488_SPI1__SetDisplayOrientation(1); // Name: Lys ude OFF, Type: Output: 0 -> pin25 SET_PORT_PIN(A,25,(0)); // Name: Lys ude OFF, Type: Output: 0 -> pin32 SET_PORT_PIN(B,0,(0)); // Name: Lys ude OFF, Type: Output: 0 -> pin1 SET_PORT_PIN(A,1,(0)); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::SetFontScaler(3, 3) FCD_01de1_gLCD_ILI9488_SPI1__SetFontScaler(3, 3); // Name: Component Macro, Type: Component Macro: gLCD_ILI9488_SPI1::ClearDisplay() FCD_01de1_gLCD_ILI9488_SPI1__ClearDisplay(); // Name: Component Macro, Type: Component Macro: Minvolt=eeprom1::Read(10) FCV_MINVOLT = FCD_06651_eeprom1__Read(10); // Name: Component Macro, Type: Component Macro: Maxvolt=eeprom1::Read(11) FCV_MAXVOLT = FCD_06651_eeprom1__Read(11); // Name: Lyssensor, Type: Component Macro: EpromSave=eeprom1::Read(0) FCV_EPROMSAVE = FCD_06651_eeprom1__Read(0); // Name: Status hvilke unit output som er aktiv Unit et Adresse20, Type: Component Macro: FlagUnitOne=eeprom1::Read(20) FCV_FLAGUNITONE = FCD_06651_eeprom1__Read(20); // Name: Status hvilke unit output som er aktiv Unit et Adresse21, Type: Component Macro: FlagUnitTwo=eeprom1::Read(21) FCV_FLAGUNITTWO = FCD_06651_eeprom1__Read(21); // Name: Component Macro, Type: Component Macro: FlagUnitTree=eeprom1::Read(22) FCV_FLAGUNITTREE = FCD_06651_eeprom1__Read(22); // Name: Lys ude OFF, Type: Output: 0 -> pin25 SET_PORT_PIN(A,25,(0)); // Name: Loop, Type: Loop: While 1 while (1) { // Name: User Macro, Type: User Macro: FrontValg() FCM_FrontValg(); if ((1) == 0) break; } mainendloop: goto mainendloop; } /*========================================================================*\ Use :Interrupt \*========================================================================*/