gLCD 4D Picaso - Display Image.

For general Flowcode discussion that does not belong in the other sections.
Post Reply
jay_dee
Posts: 130
http://meble-kuchenne.info.pl
Joined: Sun Dec 20, 2020 6:06 pm
Has thanked: 46 times
Been thanked: 29 times

gLCD 4D Picaso - Display Image.

Post by jay_dee »

Hi,
I've been try to get an image displayed on a 4D picaso gLCD ( uLCD 32PTU )
I have used the 4D tools to create the .GCI and .Dat files. and load them onto the FAT formatted SD card.
But I'm unsure of the FC commands.
For the offsets I just refered to the text of the .Dat file. For simplicity the first image should be at 0x00 0x00.

For the 'Display Image from File Picaso' what is the file name string suppoed to be? My GCI file "test2.Ggi" or the name ofthe .PNG file?
Thanks, J.

Post Reply