Flowcode Exchange

For general Flowcode discussion that does not belong in the other sections.
mnfisher
Valued Contributor
Posts: 938
http://meble-kuchenne.info.pl
Joined: Wed Dec 09, 2020 9:37 pm
Has thanked: 104 times
Been thanked: 502 times

Flowcode Exchange

Post by mnfisher »

drum roll.......

We are pleased to announce the launch of www.flowcodexchange.com

This is a (independent) site to allow the sale of Flowcode components and programming expertise.
Currently there are a few components - but we will be adding more over the next few weeks.

These are components that don't always have a place in the main distribution of Flowcode - but if you need them they will save you a ton of time.. Components will be tested and documented - possibly with source code - some may work with simulation, others only on hardware.
We also aim to sell some of the hardware too. The aim is to encourage and expand the use of Flowcode as the mainstream language for embedded projects.

All the credit goes to Peter (p.erasmus/qmesar) and his daughter Marina - who took the very basic ideas and made them a reality - so all kudos and thanks to them.

If anyone has created any interesting components or code they would like to sell (or give away) then head on over for a look too!

Martin

www.flowcodexchange.com

www.flowcodexchange.com

wayne_millard
Posts: 94
Joined: Fri Dec 04, 2020 6:12 pm
Has thanked: 1 time
Been thanked: 9 times

Re: Flowcode Exchange

Post by wayne_millard »

I love the idear of the Xchange and cant wait to see what it will turn into.

Wayne Millard :)

stefan.erni
Valued Contributor
Posts: 738
Joined: Wed Dec 02, 2020 10:53 am
Has thanked: 149 times
Been thanked: 170 times

Re: Flowcode Exchange

Post by stefan.erni »

Hi Martin, Peter and Marina

I have tested the shop with the free component and it's works fine.
Nice idea and a perfect graphics in the homepage!
I also add my email for the mailing list. So I'm very interested how this will go on.

regards

Stefan

User avatar
p.erasmus
Valued Contributor
Posts: 434
Joined: Thu Dec 03, 2020 12:01 pm
Location: Russia / Россия
Has thanked: 104 times
Been thanked: 88 times

Re: Flowcode Exchange

Post by p.erasmus »

Hi Stefan,

Thank you for using/testing the Xchange site , :D
We will do all what we can to keep the site running however we need Flowcode users to sell /(give away) their components ,This site is all about promoting Flowcode as a Programming language and Component creation :D
Regards Peter - QME Electronics

User avatar
p.erasmus
Valued Contributor
Posts: 434
Joined: Thu Dec 03, 2020 12:01 pm
Location: Russia / Россия
Has thanked: 104 times
Been thanked: 88 times

Re: Flowcode Exchange

Post by p.erasmus »

Hi All.

Just a short notice some new ADC 16 bit and 12 bit components placed at eXchange

Some more components coming over the next few weeks .
Regards Peter - QME Electronics

Alan_37
Posts: 118
Joined: Thu Dec 03, 2020 7:23 pm
Has thanked: 34 times
Been thanked: 16 times

Re: Flowcode Exchange

Post by Alan_37 »

Hello,

Just noticed this post, have to say I really like the idea.

During the years I have created some user macros to interface breakout boards that were missing on flowcode
but these are in the form of Maros, I never actually understood how to create a flowcode component

once I tried to follow a youtube video but the English accent and the way he was explaining it did not help that much.

Is there a good tutorial on how to create a flowcode conponent?

User avatar
p.erasmus
Valued Contributor
Posts: 434
Joined: Thu Dec 03, 2020 12:01 pm
Location: Russia / Россия
Has thanked: 104 times
Been thanked: 88 times

Re: Flowcode Exchange

Post by p.erasmus »

Hi Allen.

leigh once made a document to make simple components from macro's ,I just cant find it at the moment, Ben also did some stuff regarding this in the FC wiki specially for I2C and SPI communication maybe they can refer you to these docs ,

Would be nice to see you active on FC_Xcahnge sharing your components :D
Regards Peter - QME Electronics

mkopitovic
Posts: 7
Joined: Sun Dec 13, 2020 9:15 pm
Has thanked: 1 time
Been thanked: 3 times

Re: Flowcode Exchange

Post by mkopitovic »

Maybe I'm wrong and I apologize in advance but all the free components on the FlowcodeXchange are out of stock, or I can't find a way to download the component (ADS1115 AD Converter 16-bit I2C Interface).
I apologize once again if I'm wrong

chipfryer27
Valued Contributor
Posts: 1110
Joined: Thu Dec 03, 2020 10:57 am
Has thanked: 278 times
Been thanked: 397 times

Re: Flowcode Exchange

Post by chipfryer27 »

Hi

Many software items appear to be "out of stock" but this post may help

https://www.matrixtsl.com/mmforums/view ... 301#p78301

I found it after looking in the Exchange for the component.

Regards

steve001
Valued Contributor
Posts: 185
Joined: Wed Jan 13, 2021 7:15 pm
Has thanked: 81 times
Been thanked: 30 times

Re: Flowcode Exchange

Post by steve001 »

Afternoon,

That last time i spoke to peter, unfortunately this site is no longer managed due to lack of interest.

I would message peter ( P.erasmus ) and maybe martin ( mnfisher ) as they ran the site.
they may be able to assist with any queries that you might have.

Steve

Post Reply