Page 2 of 2

Re: Flowcode v9.2 released

Posted: Wed Aug 18, 2021 2:33 pm
by Steve-Matrix
Another thing to try - update your library files before accessing the menus. I think the issue is related to the "compilersettings.xml" file that is in your "%PROGRAMDATA%\FlowcodeV9\FCD" folder. It is probably missing, but running the library update should download the latest file.

Re: Flowcode v9.2 released

Posted: Wed Aug 18, 2021 7:04 pm
by chipfryer27
Hi Steve

Funny you should mention. When I initially updated I did a full database update and was informed I'm up to date. I then opened a file containing just a few basic components and I was informed that updates were available. When I looked to see what, I saw that I could update various components despite them not being used in my chart, but if I went to full database nothing was available. I put that down to a screw up especially as I crashed soon after by clicking build.

I've just tried updating after another fresh install and I had many MB to download. Happy to report that it seems to now be resolved, although it seemed to lose some of the compilers in the process.

No matter, all sorted now.

Thanks again for help.

Regards

Re: Flowcode v9.2 released

Posted: Mon Oct 25, 2021 2:25 pm
by jimhook_uk1
I've updated to V9.2 but it gets stuck in a loop that can't update and tries to download again.

Re: Flowcode v9.2 released

Posted: Mon Oct 25, 2021 3:42 pm
by medelec35
Hi jimhook_uk1.
I only get that when Kaspersky AV is running.
It's preventing the data from writing to the folder.
Can you try disabling any AV's you have running?

Re: Flowcode v9.2 released

Posted: Thu Oct 28, 2021 11:56 pm
by andeug
Hi,

I am unable to use Flowcode with Windows 11 Pro. Despite I have installed the USB driver, I can't see the Programmer Port being listed and n/a only gets shown. Is it just me that has this problem, or is it a known issue that will be addressed in a future release?

Thank you,
Andreas

Re: Flowcode v9.2 released

Posted: Fri Oct 29, 2021 8:29 am
by medelec35
Hi Andreas.
What is your target device?
I'm running Windows 11 Home as from last night and have not experienced any issues with Flowcode v9
I have four boards plugged in:
Sparkfun Redboad
Arduino Uno
Arduino Nano
BL0011
Windows 11 & FC9.png
Windows 11 & FC9.png (33.07 KiB) Viewed 4248 times
Only the top three target devices will be shown, but all four boards I have just programmed this morning with no issues.

Re: Flowcode v9.2 released

Posted: Sun Oct 31, 2021 6:33 pm
by andeug
I confirm that I have made it to work today and I no longer have issues with Windows 11.
I was missing the AVR Compiler Toolchain and some USB drivers from Arduino. :roll: