LTSR 15

For general Flowcode discussion that does not belong in the other sections.
jgu1
Posts: 602
http://meble-kuchenne.info.pl
Joined: Thu Dec 03, 2020 8:25 pm
Location: Denmark
Has thanked: 495 times
Been thanked: 132 times

LTSR 15

Post by jgu1 »

Hi Martin!

I will not hijack in FC8 forum concerning the above, thats why I ask here.

I have tested your new component. Seemed to work nicely, but sometime fluativatin a little, and as I see the Ref on the LTSR is sensitive. Do you know what I should do with this pin, ground or? pls.

I remember you for a short while ago edit the I2C display so it is possible to set how many decimal we want in a Float. Work nice in real world but not in simulation. Small thing :lol:

Jorgen
Attachments
Ltsr.fcfx
(9.46 KiB) Downloaded 147 times

medelec35
Matrix Staff
Posts: 1432
Joined: Wed Dec 02, 2020 11:07 pm
Has thanked: 506 times
Been thanked: 469 times

Re: LTSR 15

Post by medelec35 »

Hi, Jorgen,
The REF is a 2.5V bandgap ref output, so you can leave it open circuit.
I believe its function is to supply VRef of a microcontroller to make the results even more accurate (and more stable in the case of PSU ripple).
Thank for the spot with the simulation, I Will investigate and fix the issue of the decimal places issue.

Edit:
If you roll back one version, then the rounding will work again.
I will still investigate the cause.
Martin

jgu1
Posts: 602
Joined: Thu Dec 03, 2020 8:25 pm
Location: Denmark
Has thanked: 495 times
Been thanked: 132 times

Re: LTSR 15

Post by jgu1 »

Hi again Martin!

Thank´s for reply and info. The first test I perform, was a quick test. Tomorrow I do some more test and you hear. :D

Jorgen

medelec35
Matrix Staff
Posts: 1432
Joined: Wed Dec 02, 2020 11:07 pm
Has thanked: 506 times
Been thanked: 469 times

Re: LTSR 15

Post by medelec35 »

Hi Jorgen,
I have fixed the issue.
If you run an update, the latest version I2C LCD should work for you.
Martin

jgu1
Posts: 602
Joined: Thu Dec 03, 2020 8:25 pm
Location: Denmark
Has thanked: 495 times
Been thanked: 132 times

Re: LTSR 15

Post by jgu1 »

Hi Martin!
Thank´s for great job.

Display in simulation, perfect ;)

I make some test. Look good.

Powersupply in serie with my fluke and the LTSR15

Fluke A mp. ** Ltsr. Amp.

0.00 >> >> >>>> 0,00
0,50 >> >> >> >> 0, 49
1,00 >> >>>> >> 1,21
1,5 >> >>>> >> 1,45
2,0 >> >>>> >> 1,93
2,5 >> >> >> >> 2,65
3,0 >> >>>> >> 3,13
3,5 >>>>>> >> 3,37
4,0 >> >> >> >> 3,85
4,5 >> >>>> >> 4,33
5,0 >> >> >> >> 4,81

all in all when we take into account that it is a component with such a large measuring range and that resolution is I thought it is very fine. And the small inaccuracies could be hardware as well as I can see the stability of supply voltage must be very very stable.

I have not test and compare in datasheet, but could the component also be used with ASC712? :D

Br Jorgen

medelec35
Matrix Staff
Posts: 1432
Joined: Wed Dec 02, 2020 11:07 pm
Has thanked: 506 times
Been thanked: 469 times

Re: LTSR 15

Post by medelec35 »

Thanks, Jorgen, that's not bad at all, considering the maximum current for the LTSR 15 is +/-48A
jgu1 wrote:
Wed Sep 01, 2021 7:21 pm
but could the component also be used with ASC712?
No, but the good news is Flowcode already has an ASC712 component.
Just select Component Libraries, then select the search magnifying glass and enter acs.
You can select the version from within the properties.
Martin

jgu1
Posts: 602
Joined: Thu Dec 03, 2020 8:25 pm
Location: Denmark
Has thanked: 495 times
Been thanked: 132 times

Re: LTSR 15

Post by jgu1 »

Hi again.

I dont think so ;) Can´t find it, either in FC8

I think you are thinking of this thread that was apparently never made a component for ACS7xx, but would be nice ;)

https://www.matrixtsl.com/mmforums/view ... acs#p98662

Jorgen.
Attachments
ACS.PNG
ACS.PNG (6.65 KiB) Viewed 4359 times
Last edited by jgu1 on Wed Sep 01, 2021 9:00 pm, edited 1 time in total.

kersing
Valued Contributor
Posts: 149
Joined: Wed Dec 02, 2020 7:28 pm
Has thanked: 63 times
Been thanked: 56 times

Re: LTSR 15

Post by kersing »

ASC vs ACS?

medelec35
Matrix Staff
Posts: 1432
Joined: Wed Dec 02, 2020 11:07 pm
Has thanked: 506 times
Been thanked: 469 times

Re: LTSR 15

Post by medelec35 »

jgu1 wrote:
Wed Sep 01, 2021 8:52 pm
I dont think so Can´t find it, either in FC8
Ah, sorry you are right, it's my mistake
Leave it with me and I will get something sorted out for you.
You will have an ACS712, by end of tomorrow.
Martin

medelec35
Matrix Staff
Posts: 1432
Joined: Wed Dec 02, 2020 11:07 pm
Has thanked: 506 times
Been thanked: 469 times

Re: LTSR 15

Post by medelec35 »

kersing wrote:
Wed Sep 01, 2021 8:59 pm
ASC vs ACS?
Sorry that was a typo, ACS is correct.
I even entered acs after. ;)
Martin

Post Reply