HX711 reading RAW A and B Channel
Posted: Fri Apr 01, 2022 11:20 am
Hi Ben
HX711 is 24-Bit Analog-to-Digital Converter (ADC) for Weigh Scales with two channel. It's working fine with Flowcode.
Only the support for both channels (A and B) is not easy.
Would it be possible to add 3 additional commands to the HX711 component?
These should only read the Raw values without having to reconfigure the HX711 in the Flowcode component propertis.
Scale Factor and Zero Set would not be needed.
Like this:
RawsampleA64
RawsampleA128
RawsampleB32
Or just add the command RawsampleB32 for the second channel.
So I can use the B channel additionally with the A channel
regards
Stefan
HX711 is 24-Bit Analog-to-Digital Converter (ADC) for Weigh Scales with two channel. It's working fine with Flowcode.
Only the support for both channels (A and B) is not easy.
Would it be possible to add 3 additional commands to the HX711 component?
These should only read the Raw values without having to reconfigure the HX711 in the Flowcode component propertis.
Scale Factor and Zero Set would not be needed.
Like this:
RawsampleA64
RawsampleA128
RawsampleB32
Or just add the command RawsampleB32 for the second channel.
So I can use the B channel additionally with the A channel
regards
Stefan