Console User Input TAB desappering !

Any bugs you encounter with Flowcode should be discussed here.
Post Reply
ssttrragmail
Posts: 29
http://meble-kuchenne.info.pl
Joined: Sat Nov 21, 2020 10:38 pm
Has thanked: 18 times
Been thanked: 2 times

Console User Input TAB desappering !

Post by ssttrragmail »

Hi FCUsers ! I have 2 PC´s with FC9.
In one of them I can see the two TABS ("Uart-ComPort1" and "User Input") when running, and the simulation goes ok.
But in the second PC, even with the same code on both machines, the "User Input" tab always desappears when RUN (F5) :shock:
What could be wrong with this PC ?
Thanks for any tips.
Attachments
Console before RUN.PNG
Console before RUN.PNG (157.35 KiB) Viewed 1496 times
Console after RUN.PNG
Console after RUN.PNG (182.52 KiB) Viewed 1496 times

chipfryer27
Valued Contributor
Posts: 1110
Joined: Thu Dec 03, 2020 10:57 am
Has thanked: 278 times
Been thanked: 397 times

Re: Console User Input TAB desappering !

Post by chipfryer27 »

Hi

Are both versions up to date (both running latest versions)?

A few minor Console issues were reported in early releases, that were subsequently resolved in the updates.

Hope this helps,

Regards

ssttrragmail
Posts: 29
Joined: Sat Nov 21, 2020 10:38 pm
Has thanked: 18 times
Been thanked: 2 times

Re: Console User Input TAB desappering !

Post by ssttrragmail »

Hi chip. Yes, both FC9 are updated. This is the fact that confuse me. But I´ll read the past issues with Console. It´s also a good idea. Thanks.

BenR
Matrix Staff
Posts: 1707
Joined: Mon Dec 07, 2020 10:06 am
Has thanked: 435 times
Been thanked: 598 times

Re: Console User Input TAB desappering !

Post by BenR »

Hello,

As well as the flowcode core application updates have you gone to the Help -> Library updates to make sure you have the latest component updates. Might be worth changing the files in use drop down to full database and this will update everything.

If you're still having problems after this then let us know and I'll investigate for you.

ssttrragmail
Posts: 29
Joined: Sat Nov 21, 2020 10:38 pm
Has thanked: 18 times
Been thanked: 2 times

Re: Console User Input TAB desappering !

Post by ssttrragmail »

Hi ! Trying to clarify the issue with my first two computers, I took a third Win10 PC (my businness notebook) and installed a new copy of FC9 from scratch, with respectivelly updated files and components.

Just after loading the “ConsoleDemo.fcfx” code (and all successive re-loads of it), I really could see the two static TABS (“Uart-ComPort1” and “User Input”) on Console.
But for my surprise, always when RUN (F5) the “User Input” tab are still disapeering, althought “Uart-ComPort1” tab remains.

My impression is that Console only runs satisfactorily on my FIRST PC, that haven´t updated the FC9 CORE SYSTEM. The two others with updated cores, are not working for me.
Attachments
before RUN.jpg
before RUN.jpg (121.49 KiB) Viewed 1439 times
After RUN.jpg
After RUN.jpg (120.61 KiB) Viewed 1439 times

BenR
Matrix Staff
Posts: 1707
Joined: Mon Dec 07, 2020 10:06 am
Has thanked: 435 times
Been thanked: 598 times

Re: Console User Input TAB desappering !

Post by BenR »

Hello,

Many thanks for confirming and letting us know, hopefully now fixed for you via the Help -> Library updates.

ssttrragmail
Posts: 29
Joined: Sat Nov 21, 2020 10:38 pm
Has thanked: 18 times
Been thanked: 2 times

Re: Console User Input TAB desappering !

Post by ssttrragmail »

Console User Input TAB appering now ... Thanks !!
Attachments
Console working.jpg
Console working.jpg (116.03 KiB) Viewed 1422 times

Post Reply