ADC Not work PIC18F47Q10

For general Flowcode discussion that does not belong in the other sections.
Post Reply
seokgi
Posts: 165
http://meble-kuchenne.info.pl
Joined: Thu Dec 03, 2020 1:43 pm
Has thanked: 5 times
Been thanked: 6 times

ADC Not work PIC18F47Q10

Post by seokgi »

Hello?
I'm working on a project using PIC18F47Q10.
ADC is not working.
https://www.matrixtsl.com/mmforums/view ... 76&t=22120
I'm refer to this. AN0 works. AN1 does not work. C is so difficult.

I want to program ADC from icon.
please.
thank you.

BenR
Matrix Staff
Posts: 1707
Joined: Mon Dec 07, 2020 10:06 am
Has thanked: 435 times
Been thanked: 598 times

Re: ADC Not work PIC18F47Q10

Post by BenR »

Hello,

Thanks for letting us know. I've found and fixed a problem which hopefully will improve things for you. If not then please can you post a simple project file showing the problem and I'll investigate further.

seokgi
Posts: 165
Joined: Thu Dec 03, 2020 1:43 pm
Has thanked: 5 times
Been thanked: 6 times

Re: ADC Not work PIC18F47Q10

Post by seokgi »

Thanks for your interest.
I solved this problem in the manual and the answer to the same problem in FC8. And I just updated the library. We will test it and report the results.

And I'll post how I solved it. And I'll post how I solved it. See the Read_VOL macro.
Attachments
Dog_Toilet_Washer1_ADC.fcfx
(44.04 KiB) Downloaded 104 times

seokgi
Posts: 165
Joined: Thu Dec 03, 2020 1:43 pm
Has thanked: 5 times
Been thanked: 6 times

Re: ADC Not work PIC18F47Q10

Post by seokgi »

That is not working.

Post Reply