/*********************************************************************
 *                  Flowcode CAL IO File
 *
 * File: STARM_CAL_IO.h
 *
 * (c) 2016 Matrix TSL
 * http://www.matrixtsl.com
 *
 * Software License Agreement
 *
 * The software supplied herewith by Matrix TSL (the
 * “Company”) for its Flowcode graphical programming language is
 * intended and supplied to you, the Company’s customer, for use
 * solely and exclusively on the Company's products. The software
 * is owned by the Company, and is protected under applicable
 * copyright laws. All rights are reserved. Any use in violation
 * of the foregoing restrictions may subject the user to criminal
 * sanctions under applicable laws, as well as to civil liability
 * for the breach of the terms and conditions of this licence.
 *
 * THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES,
 * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
 * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
 * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
 * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
 *
 * Changelog:
 *
 *  date  | by | description
 * -------+----+-----------------------------------------------------
 * 280416 | SK | Created
 */



// FC6 Port/Pin macros



#ifdef MX_BL0061_PINMAP

	#define FCP_GET(Type, Port, Mask, Shift) 			FC_CAL_Port_In__##Port(Mask, Shift)
	#define FCP_SET(Type, Port, Mask, Shift, Source) 	FC_CAL_Port_Out__##Port(Mask, Source)

#else

	// FC6 Port/Pin macros
	#define FCP_GET(Type, Port, Mask, Shift) FCP_GET_##Type(GPIO##Port, Mask, Shift)
	#define FCP_SET(Type, Port, Mask, Shift, Source) FCP_SET_##Type(GPIO##Port, Mask, Shift, Source)

	#define FCP_GET_B(Port, Mask, Shift)   (FC_CAL_Port_In_DDR__x((Port), (Mask), (Shift)))
	#define FCP_GET_M(Port, Mask, Shift)   (FC_CAL_Port_In_DDR__x((Port), (Mask), (Shift)))
	#define FCP_GET_F(Port, Mask, Shift)   (FC_CAL_Port_In_DDR__x((Port), (Mask), (Shift)))

#endif

	// Bit setting macro
	#if defined GPIO_MODER_MODER0
	#define FCP_SET_B(Port, Mask, Shift, Source)	{Port->MODER = (Port->MODER & ~(3<<((Shift)*2))) | (1<<((Shift)*2)); Port->BSRR = 1 << (Shift + (Source?0:16));}
	#elif defined GPIO_CRH_MODE
		#define FCP_SET_B(Port, Mask, Shift, Source)    {if(Shift<8){Port->CRL=(Port->CRL&~(3<<((Shift)*4)))|(1<<((Shift)*4));}else{Port->CRH=(Port->CRH&~(3<<((Shift&7)*4)))|(1<<((Shift&7)*4));};Port->BSRR=1<<(Shift+(Source?0:16));}
	#else
		#define FCP_SET_B(Port, Mask, Shift, Source)    FC_CAL_Port_Out_DDR__x (Port, Mask,(Source << Shift))
	#endif

	// Mask setting macro
	#if defined GPIO_MODER_MODER0
		#define FCP_SET_M(Port, Mask, Shift, Source) \
			{ uint32_t p; for(p = 0U; p < 16; p++) {if (Mask & (1<<p)) {Port->MODER = (Port->MODER & ~(3<<((p)*2))) | (1<<((p)*2));}} \
			Port->ODR = (Port->ODR & ~Mask) | ((Source << Shift) & Mask); }
	#else
	#define FCP_SET_M(Port, Mask, Shift, Source)    FC_CAL_Port_Out_DDR__x (Port, Mask,(Source << Shift))
	#endif

	// Full port setting macro
	#if defined GPIO_MODER_MODER0
		#define FCP_SET_F(Port, Mask, Shift, Source) ({Port->MODER = 0x55555555; Port->ODR = Source;})
	#else
	#define FCP_SET_F(Port, Mask, Shift, Source)    FC_CAL_Port_Out_DDR__x (Port, Mask,(Source << Shift))
	#endif






//GPIOA
#define porta GPIOA
#define PORTA GPIOA
#define trisa GPIOA
#define TRISA GPIOA
//GPIOB
#define portb GPIOB
#define PORTB GPIOB
#define trisb GPIOB
#define TRISB GPIOB
//GPIOC
#define portc GPIOC
#define PORTC GPIOC
#define trisc GPIOC
#define TRISC GPIOC
//GPIOD
#define portd GPIOD
#define PORTD GPIOD
#define trisd GPIOD
#define TRISD GPIOD
//GPIOE
#define porte GPIOE
#define PORTE GPIOE
#define trise GPIOE
#define TRISE GPIOE
//GPIOF
#define portf GPIOF
#define PORTF GPIOF
#define trisf GPIOF
#define TRISF GPIOF
//GPIOG
#define portg GPIOG
#define PORTG GPIOG
#define trisg GPIOG
#define TRISG GPIOG
//GPIOH
#define porth GPIOH
#define PORTH GPIOH
#define trish GPIOH
#define TRISH GPIOH
//GPIOI
#define porti GPIOI
#define PORTI GPIOI
#define trisi GPIOI
#define TRISI GPIOI
//GPIOJ
#define portj GPIOJ
#define PORTJ GPIOJ
#define trisj GPIOJ
#define TRISJ GPIOJ
//GPIOK
#define portk GPIOK
#define PORTK GPIOK
#define trisk GPIOK
#define TRISK GPIOK
//GPIOL
#define portl GPIOL
#define PORTL GPIOL
#define trisl GPIOL
#define TRISL GPIOL
//GPIOM
#define portm GPIOM
#define PORTM GPIOM
#define trism GPIOM
#define TRISM GPIOM
//GPION
#define portn GPION
#define PORTN GPION
#define trisn GPION
#define TRISN GPION
//GPIOO
#define porto GPIOO
#define PORTO GPIOO
#define triso GPIOO
#define TRISO GPIOO
//GPIOP
#define portp GPIOP
#define PORTP GPIOP
#define trisp GPIOP
#define TRISP GPIOP

#define FC_CAL_Bit_In_DDR(Port, Tris, Pin)		(FC_CAL_Bit_In_DDR__x((Port), (Pin)))
#define FC_CAL_Bit_High_DDR(Port, Tris, Pin)	FCP_SET_B(Port, (1 << Pin), Pin, (1 << Pin))
#define FC_CAL_Bit_Low_DDR(Port, Tris, Pin)		FCP_SET_B(Port, (1 << Pin), Pin, (0 << Pin))

#define FC_CAL_Bit_In(Port, Pin)				(FC_CAL_Port_In__x((Port), (1 << Pin), (Pin)))
#define FC_CAL_Bit_High(Port, Pin)				FC_CAL_Port_Out__x ((Port), (1 << Pin), (1 << Pin))
#define FC_CAL_Bit_Low(Port, Pin)				FC_CAL_Port_Out__x ((Port), (1 << Pin), (0 << Pin))

#define FCP_SET_NODDR(Port, Pin, Value)			GPIO##Port->BSRR = 1 << (Pin + (Value?0:16))