<root>
<document schema='101' license='1,,*****' title='DC Voltmeter With Calibration Pot which variable pot can be removed after Calibration.' description='   First, The Name Of The Programmer Is Displayed On Start Up Of The Program.
10 ADC samples are taken in an interval of 10ms and an average ADC sample is got after adding up all the 10  samples and divided by 10.
Which is then coverted to voltage and displayed on an LCD.There is an ADCkal pot,This is a 5k variable pot and a Push Button.On start up the read voltage will need calbration to match your trusted Digital voltmeter.
These two are for that purpose,so on start up of the program,Turn the ADCvolt to any value,now Use your Digital meter to measure any voltage between 0-55v to get a  real voltage reading,now Press the CALbutton once coz its (a Latching button meaning when pressed it stays on until pressed agin to turn it off)) and on so doing the prog enters into calibration mode
Now turn the ADCkal (5K pot)until you get a voltage reading on the LCD EQUAL to the voltage reading of your trusted digittal meter.If that is achieved now press the CALbutton once again to take it off and the program 
exits calibration mode and on so doing a dvF (division factor) value is saved in the eeprom,which will be used in voltage calculations and when ever
the program starts up it checks for this DIVISION  FACTOR value (dvF) in the eeprom which is used to calculate a real Vin value and displayed on the LCD.

                                       PROGRAMMER:Jjumba Derrick
                                       MCU:pic18f442
                                       Crystal:20MHz  
                                       Date:2rd|April|2019
                                       Time:4:23pm' target='PIC.18F.18F442' >
	<config data='!0,2200!10,a!20,0!30,80!40,0!50,0!60,0%8,2%d,1%10,0%11,1%12,2%18,0%19,0%28,0%30,0%32,0%37,1%40,0%41,0%42,0%43,0%4f,0%4e,0%50,0%51,0%52,0%53,0%5f,0%5e,0%5d,0%60,0%61,0%62,0%63,0%6e,0' clkspd='20000000' simspd='1' usewdt='0' constif='0' />
	<plugins >
		<dll_dbg_icd enabled='0' >
			<data name='debug' value='1' />
			<data name='userpins' value='0' />
			<data name='speed' value='0' />
			<data name='usev9' value='0' />
			<data name='breaks' value='8' />
			<data name='stacks' value='8' />
			<data name='clkport' value='1' />
			<data name='clkbit' value='6' />
			<data name='dataport' value='1' />
			<data name='databit' value='7' />
			<data name='ghostype' value='0' />
			<data name='monitor' value='1' />
			<data name='ictloop' value='0' />
			<data name='ictrate' value='20000' />
			<data name='ictmask' value='0' />
			<data name='anlpres' value='19' />
			<data name='digmask1' value='-1' />
			<data name='digmask2' value='-1' />
		</dll_dbg_icd>
		<dll_upgrader enabled='1' />
	</plugins>
	<supplement use='0' head='' body='' />
	<debug />
	<ghost >
		<FK2 >
			<data name='FK2D0' port='4294967295' pin='4294967295' />
			<data name='FK2D1' port='4294967295' pin='4294967295' />
			<data name='FK2D2' port='4294967295' pin='4294967295' />
			<data name='FK2D3' port='4294967295' pin='4294967295' />
			<data name='FK2D4' port='4294967295' pin='4294967295' />
			<data name='FK2D5' port='4294967295' pin='4294967295' />
			<data name='FK2D6' port='4294967295' pin='4294967295' />
			<data name='FK2D7' port='4294967295' pin='4294967295' />
			<data name='FK2D8' port='4294967295' pin='4294967295' />
			<data name='FK2D9' port='4294967295' pin='4294967295' />
			<data name='FK2D10' port='4294967295' pin='4294967295' />
			<data name='FK2D11' port='4294967295' pin='4294967295' />
			<data name='FK2D12' port='4294967295' pin='4294967295' />
			<data name='FK2D13' port='4294967295' pin='4294967295' />
			<data name='FK2D14' port='4294967295' pin='4294967295' />
			<data name='FK2D15' port='4294967295' pin='4294967295' />
			<data name='FK2A0' port='4294967295' pin='4294967295' />
			<data name='FK2A1' port='4294967295' pin='4294967295' />
			<data name='FK2A2' port='4294967295' pin='4294967295' />
			<data name='FK2A3' port='4294967295' pin='4294967295' />
			<data name='FK2A4' port='4294967295' pin='4294967295' />
			<data name='FK2A5' port='4294967295' pin='4294967295' />
		</FK2>
		<ICD >
			<data name='AnalogPrescaleValue' value='19' />
			<data name='DigitalSampleRate' value='100000' />
			<data name='BreakpointCount' value='8' />
			<data name='CallStackDepthCount' value='8' />
			<data name='ClockPort' value='1' />
			<data name='ClockPin' value='6' />
			<data name='DataPort' value='1' />
			<data name='DataPin' value='7' />
			<data name='UseDefaultPins' value='1' />
			<data name='WrapEnabled' value='1' />
			<data name='CommsDelayOverridden' value='0' />
			<data name='CommsDelay' value='9' />
			<data name='CalculatedCommsDelay' value='9' />
		</ICD>
		<pins >
			<digital A='0' B='0' C='0' D='0' E='0' F='0' G='0' H='0' I='0' J='0' K='0' L='0' M='0' N='0' O='0' P='0' Q='0' R='0' S='0' T='0' U='0' V='0' W='0' X='0' Y='0' Z='0' />
			<analog A='0' B='0' C='0' D='0' E='0' F='0' G='0' H='0' I='0' J='0' K='0' L='0' M='0' N='0' O='0' P='0' Q='0' R='0' S='0' T='0' U='0' V='0' W='0' X='0' Y='0' Z='0' />
		</pins>
	</ghost>
	<components >
		<settings autoimg='1' center='1' unitscale='0' fixedscale='0' fixedx='1' fixedy='1' fixedz='1' headcode='0' />
		<definition guid='bf709196-17ba-4821-b788-23b4f854ff2d' vstate='40' vmin='0' vmaj='1' srcleaf='' visiblename='' description='' category='' catenable='1' author='' manuname='' manucode='' sysinfo='0' keywords='' dynamic='1' iconpath='' />
		<component class_type='root' codename='panel' x='0' y='0' z='0' xsz='1' ysz='1' zsz='1' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
			<resources />
			<properties />
			<values />
			<events />
			<apis />
			<variables >
				<variable public='0' >
					<def class_type='variable' name='s8' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='voltage_s' type='T8' description='' isconst='0' isinit='0' usrinit='&quot;&quot;' setinit='' >
						<array size='5' />
					</def>
				</variable>
				<variable public='0' >
					<def class_type='variable' name='s7' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='voltage' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='volts' type='T8' description='' isconst='0' isinit='0' usrinit='&quot;&quot;' setinit='' >
						<array size='4' />
					</def>
				</variable>
				<variable public='0' >
					<def class_type='variable' name='s6' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='s5' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='s4' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='NUM_SAMPLES' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='s3' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='s2' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='s1' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='false' type='b1' description='' isconst='1' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='s10' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='sum' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='voltage_Unit' type='T8' description='' isconst='0' isinit='0' usrinit='&quot;&quot;' setinit='' >
						<array size='2' />
					</def>
				</variable>
				<variable public='0' >
					<def class_type='variable' name='ADCkal' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Voltage_Hundredths' type='T8' description='' isconst='0' isinit='0' usrinit='&quot;&quot;' setinit='' >
						<array size='5' />
					</def>
				</variable>
				<variable public='0' >
					<def class_type='variable' name='dvF' type='u16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='ADCvolt' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='sample_count' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='true' type='b1' description='' isconst='1' isinit='1' usrinit='1' setinit='1' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='s9' type='s16' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='ADcKAL_FLT' type='f32' description='' isconst='0' isinit='0' usrinit='0.0' setinit='' />
				</variable>
			</variables>
			<macros >
				<macro >
					<flowline name='UNITS' description='' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='decision' title='Decision' cmdcolor='6234959' cmdcolor_sec='12814259' exp='voltage &gt; 999' swap='0' >
							<flowline >
								<command class_type='calculation' title='Calculation' cmdcolor='1124119' cmdcolor_sec='7703419' >
									<exp exp='voltage_Unit = Left$ (volts,2)' />
								</command>
							</flowline>
							<flowline >
								<command class_type='decision' title='Decision' cmdcolor='6234959' cmdcolor_sec='12814259' exp='voltage &gt; 99' swap='0' >
									<flowline >
										<command class_type='calculation' title='Calculation' cmdcolor='1124119' cmdcolor_sec='7703419' >
											<exp exp='voltage_Unit = Left$ (volts,1)' />
										</command>
									</flowline>
									<flowline >
										<command class_type='calculation' title='Calculation' cmdcolor='1124119' cmdcolor_sec='7703419' >
											<exp exp='voltage_Unit = &quot;0&quot;' />
										</command>
										<command class_type='decision' title='Decision' cmdcolor='6234959' cmdcolor_sec='12814259' exp='voltage &lt; 10' swap='0' >
											<flowline >
												<command class_type='calculation' title='Calculation' cmdcolor='1124119' cmdcolor_sec='7703419' >
													<exp exp='Voltage_Hundredths = voltage_Unit + volts' />
												</command>
											</flowline>
											<flowline />
										</command>
									</flowline>
								</command>
							</flowline>
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='SAMPLES' description='' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='loop' title='x10 Sampling Loop' cmdcolor='5767104' cmdcolor_sec='5767104' type='0' exp='sample_count &lt; NUM_SAMPLES' start='0' >
							<flowline >
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s1' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s2' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s3' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s4' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s5' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s6' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s7' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s8' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s9' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='ADCvolt' macro='GetInt' >
									<return exp='s10' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='10' type='1' />
								<command class_type='calculation' title='Calculation' cmdcolor='1124119' cmdcolor_sec='7703419' >
									<exp exp='sample_count = 0xA' />
								</command>
							</flowline>
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='LCD' description='' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='Cursor' >
							<argument exp='0' />
							<argument exp='0' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='PrintString' >
							<argument exp='&quot;      &quot;' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='Cursor' >
							<argument exp='0' />
							<argument exp='0' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='PrintString' >
							<argument exp='voltage_Unit' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='PrintString' >
							<argument exp='&quot;.&quot;' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='PrintString' >
							<argument exp='Voltage_Hundredths' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='Cursor' >
							<argument exp='5' />
							<argument exp='0' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='PrintString' >
							<argument exp='&quot;V&quot;' />
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Main' description='' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='Start' />
						<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='200' type='1' />
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='Cursor' >
							<argument exp='1' />
							<argument exp='0' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='PrintString' >
							<argument exp='&quot;DERRICK PRO!&quot;' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='Cursor' >
							<argument exp='0' />
							<argument exp='1' />
						</command>
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='PrintString' >
							<argument exp='&quot;Electronics (:-)&quot;' />
						</command>
						<command class_type='delay' title='Delay' cmdcolor='5751039' cmdcolor_sec='5751039' exp='2' type='2' />
						<command class_type='call' title='Call Component Macro' cmdcolor='2424960' cmdcolor_sec='9004260' component='lcd_16x2' macro='Clear' />
						<command class_type='calculation' title='Calculation' cmdcolor='1124119' cmdcolor_sec='7703419' >
							<exp exp='ADCkal = 0x0' />
							<exp exp='ADCvolt = 0x0' />
							<exp exp='dvF = 0xB' />
							<exp exp='sample_count = 0x0' />
							<exp exp='NUM_SAMPLES = 0xA' />
							<exp exp='s1 = 0x0' />
							<exp exp='s2 = 0x0' />
							<exp exp='s3 = 0x0' />
							<exp exp='s4 = 0x0' />
							<exp exp='s5 = 0x0' />
							<exp exp='s6 = 0x0' />
							<exp exp='s7 = 0x0' />
							<exp exp='s8 = 0x0' />
							<exp exp='s9 = 0x0' />
							<exp exp='s10 = 0x0' />
							<exp exp='sum = 0x0' />
							<exp exp='voltage = 0x0' />
							<exp exp='' />
						</command>
						<command class_type='loop' title='SAFE voltage Loop' textmode='1' cmdcolor='5767104' cmdcolor_sec='5767104' type='0' exp='1' >
							<flowline >
								<command class_type='call' title='Call Macro' textmode='1' cmdcolor='2424960' cmdcolor_sec='9004260' macro='SAMPLES' />
								<command class_type='calculation' title='Calculation' cmdcolor='1124119' cmdcolor_sec='7703419' >
									<exp exp='sum = s1 + s2 + s3 + s4 + s5 + s6 + s7 + s8 + s9 + s10' />
									<exp exp='ADCvolt = sum / NUM_SAMPLES' />
									<exp exp='voltage = (ADCvolt * 5) / (1023 / 100) * dvF' />
									<exp exp='' />
									<exp exp='' />
									<exp exp='' />
									<exp exp='' />
									<exp exp='' />
								</command>
								<command class_type='calculation' title='Calculation' cmdcolor='1124119' cmdcolor_sec='7703419' >
									<exp exp='volts = ToString$ (voltage)' />
									<exp exp='Voltage_Hundredths = Right$ (volts,2)' />
									<exp exp='' />
								</command>
								<command class_type='call' title='Call Macro' textmode='1' cmdcolor='2424960' cmdcolor_sec='9004260' macro='UNITS' />
								<command class_type='call' title='Call Macro' textarea='36,0,511,300' cmdcolor='2424960' cmdcolor_sec='9004260' macro='LCD' />
							</flowline>
						</command>
					</flowline>
				</macro>
			</macros>
			<component class_type='ref' guid='dcbf571f-a6fa-402d-bdd4-be00cca4070f' vmin='1' vmaj='1' codename='eeprom1' x='70' y='-30' z='0' xsz='20' ysz='20' zsz='20' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='EESize' data='256 byte' />
					<value target='EEbitdepth' data='8 bit' />
					<value target='InitialValues' data='' />
					<value target='InitValsParsed' data='' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='f8c9b53d-0bf2-469f-8f0a-34caa93749ba' vmin='1' vmaj='1' codename='lcd_16x2' x='0' y='120' z='0' xsz='3.125' ysz='4.13223' zsz='1' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='Pin_Data_0' data='$PORTB.5' />
					<value target='Pin_Data_1' data='$PORTB.4' />
					<value target='Pin_Data_2' data='$PORTB.3' />
					<value target='Pin_Data_3' data='$PORTB.2' />
					<value target='Pin_RS' data='$PORTB.7' />
					<value target='Pin_E' data='$PORTB.6' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='14683ea8-5a08-4b3a-be2d-3dea3e17e720' vmin='3' vmaj='1' codename='ADCvolt' x='-80' y='-10' z='0' xsz='99.9999' ysz='99.9999' zsz='73.3834' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='1' >
				<resources />
				<properties />
				<values >
					<value target='angle_start' data='225.000000' />
					<value target='angle_sweep' data='270.000000' />
					<value target='cap_color' data='192' />
					<value target='point_color' data='16777215' />
					<value target='ScopeTraces' data='0' />
					<value target='channel' data='1' />
					<value target='vrefvol' data='100' />
					<value target='vrefop' data='000' />
					<value target='convspd' data='002' />
					<value target='actime' data='40' />
					<value target='bits' data='10' />
					<value target='bitmul' data='0.004883' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='14683ea8-5a08-4b3a-be2d-3dea3e17e720' vmin='3' vmaj='1' codename='ADCkal' x='-80' y='-120' z='0' xsz='99.9999' ysz='99.9999' zsz='73.3834' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='1' >
				<resources />
				<properties />
				<values >
					<value target='angle_start' data='225.000000' />
					<value target='angle_sweep' data='270.000000' />
					<value target='cap_color' data='65535' />
					<value target='point_color' data='12582912' />
					<value target='ScopeTraces' data='0' />
					<value target='channel' data='5' />
					<value target='vrefvol' data='500' />
					<value target='vrefop' data='000' />
					<value target='convspd' data='002' />
					<value target='actime' data='40' />
					<value target='bits' data='10' />
					<value target='bitmul' data='0.004883' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='5c1da48f-ce54-4622-bdd9-fc812e373696' vmin='1' vmaj='1' codename='CALbutton' x='70' y='-130' z='0' xsz='2.65957' ysz='2.65957' zsz='1' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='pin' data='$PORTB.0' />
					<value target='polarity' data='001' />
					<value target='debounce' data='10' />
					<value target='operation' data='001' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='9a971ee1-28e0-4e47-9c09-71268383fc75' vmin='0' vmaj='1' codename='shape_label1' x='-80' y='-60' z='0' xsz='1.56522' ysz='2.5' zsz='0' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='Color' data='16777215' />
					<value target='Background' data='-1' />
					<value target='Font' data='Arial' />
					<value target='Text' data='ADCvolt' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='9a971ee1-28e0-4e47-9c09-71268383fc75' vmin='0' vmaj='1' codename='shape_label2' x='-80' y='-170' z='0' xsz='1.68224' ysz='2.5' zsz='0' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='Color' data='16777215' />
					<value target='Background' data='-1' />
					<value target='Font' data='Arial' />
					<value target='Text' data='ADCkal' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='9a971ee1-28e0-4e47-9c09-71268383fc75' vmin='0' vmaj='1' codename='shape_label4' x='70' y='-170' z='0' xsz='1.2' ysz='2.5' zsz='0' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='Color' data='16777215' />
					<value target='Background' data='-1' />
					<value target='Font' data='Arial' />
					<value target='Text' data='CALbutton' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='9a971ee1-28e0-4e47-9c09-71268383fc75' vmin='0' vmaj='1' codename='Eeprom' x='70' y='-60' z='0' xsz='1.63636' ysz='2.5' zsz='0' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='Color' data='16777215' />
					<value target='Background' data='-1' />
					<value target='Font' data='Arial' />
					<value target='Text' data='Eeprom' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
		</component>
	</components>
	<keymap />
	<panel2d shadows='1' lighting='2' brightness='0' perspective='0' >
		<background rgb='7292207' img='' style='0' />
		<camera xe='0' ye='0' ze='300' xt='0' yt='0' zt='0' xquat='0' yquat='0' zquat='0' wquat='1' />
	</panel2d>
	<panel3d shadows='0' lighting='1' brightness='0' perspective='0' >
		<background rgb='8409120' img='' style='0' />
		<table rgb='8421376' img='' style='0' size='0' />
		<camera xe='0' ye='0' ze='300' xt='0' yt='0' zt='0' xquat='0' yquat='0' zquat='0' wquat='1' />
		<camerakey0 xe='0' ye='0' ze='300' xt='0' yt='0' zt='0' xquat='0' yquat='0' zquat='0' wquat='1' />
		<camerakey1 xe='-3.67394e-14' ye='0' ze='-300' xt='0' yt='0' zt='0' xquat='0' yquat='1' zquat='0' wquat='6.12323e-17' />
		<camerakey2 xe='0' ye='-300' ze='6.66134e-14' xt='0' yt='0' zt='0' xquat='-0.707107' yquat='0' zquat='0' wquat='0.707107' />
		<camerakey3 xe='-3.67394e-14' ye='300' ze='6.66134e-14' xt='0' yt='0' zt='0' xquat='-4.32978e-17' yquat='0.707107' zquat='0.707107' wquat='4.32978e-17' />
		<camerakey4 xe='-300' ye='-6.66134e-14' ze='6.66134e-14' xt='0' yt='0' zt='0' xquat='-0.5' yquat='0.5' zquat='0.5' wquat='0.5' />
		<camerakey5 xe='300' ye='-6.66134e-14' ze='6.66134e-14' xt='0' yt='0' zt='0' xquat='-0.5' yquat='-0.5' zquat='-0.5' wquat='0.5' />
		<camerakey6 xe='-173.205' ye='-173.205' ze='173.205' xt='0' yt='0' zt='0' xquat='-0.424708' yquat='0.17592' zquat='0.339851' wquat='0.820473' />
	</panel3d>
	<layout >
		<view type='0' name='Main' mode='0' placement='LAAAAAAAAAABAAAA---------------------1IBAAAYAAAAiQIAAIkCAAA' zoom='50' scrollx='60' scrolly='590' flags='0' />
		<view type='0' name='SAMPLES' mode='0' placement='LAAAAAAAAAABAAAA---------------------wUAAAAYAAAAQgEAAIkCAAA' zoom='50' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='UNITS' mode='0' placement='LAAAAAAAAAABAAAA---------------------wUAAAAYAAAAQgEAAIkCAAA' zoom='50' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='LCD' mode='0' placement='LAAAAAAAAAABAAAA---------------------wUAAAAYAAAAQgEAAIkCAAA' zoom='50' scrollx='0' scrolly='0' flags='0' />
	</layout>
</document>
</root>
