Matrix user forums

Hi Benj,

Yes, I'm running the last patch on Flowcode V6 (6.0.4)

The problem occur on FlowCode V5 either.. Maybe i have some bad code, anyway i am sending a new file with PIC16F877A, and an image with the error, there is no description on error, only error appear.


Regards,
Carlos Viveiros

Hi,

I made a simple code, but i'm getting an error in RS232, can someone help me with it?


Regards,
Carlos Viveiros

Dear Carlo, There is one solution: Take a microchip with larger RAM http://www.microchip.com/ParamChartSearch/chart.aspx?branchID=1002&mid=10&lang=en&pageId=74 Kind regards Jan Lichtenbelt Yes. that is a solution, I already order a pic 18F4550 that have a 2K of RAM. Thanks. :wink:

Hello, I've downloaded a sample file from matrixmultimedia, to board EB023-02 with a simple webserver only for test, but program file always gave an error. Not enought free memory. RAM available:368 bytes, used:393 bytes (106.7%), free:-25 bytes (-6.7%), i have the pic that the program was made to w...

Hello Carlos, There is an injector component which is designed to replicate the previous vNet functionality. Unfortunately I wasn't able to provide a good level of testing for this so even though it exists I don't think it works properly quite yet. Hopefully this is something we can get fixed for t...

Hello Carlos, We decided to retire Vnet in Flowcode v6 (its not even included in the installer as far as i know). However we did add replacement components which should be able to simulate what you are trying to do in which could previously be done in Vnet. The "injector" components are l...

Does anyone else tried working on Vnet of Flowcode V6?

Hello Martin. Yes, the program is workin, LCD is working, and you add a few thing, and parameters, everything works fine. But initial problem was transfering a byte from rs232 in an instance of flowcode, and transfering to another instance of flowcode. But you didn't add any Injector like Vnet to se...

First of all, tanks for helping me.

something is wrong with the file you made, i can't open. It keeps telling "Failed to open document. Atribute <start> is not found".

FlowCode V4 i create this way.

Flowcode V4 Works Fine.

Can't make it work either ...

in V4 the byte arrive in the other instance of flowcode with no problem. But in V6 i cant't make it arrive in receiver instance.

From Scratch.

I didn't even trie create on v5, save file and open on v6. that possibility didn't cross my mind. But i will trie right now.

Hello people, In previous versions of flowcode (v4, v5) the vnet server works fine. But now on Flowcode V6 i cant't make it run. Can someone help me with 2 (emitter and receiver) examples in flowcode v6? transmiting a single byte with rs232, running on same computer. emiting one byte in one instance...

Yes, i guess not ...

I normally use a 4 Mhz (4000000 Hz) Crystal

Here is an example of a very acurate time for digital clock. In this case, 50 Hz.

...one thing to note is if you look at the solution that wayne posted and the one i posted although mine wasnt what you needed it just illustrates slightly different placement of loops or other functions can make a small change to the way your firmware runs... Yes, I agree with you, and I appreciat...

Hi Carlos, Try this the problem that i can see is that you dont read the status of the switchs when you are looping around a to a. And i have put a loop in so that when any button is pressed it only clocks up one count. Wayne You light me ... i solve the problem with based on your solution ... Chec...

Hi Carlos, Try this the problem that i can see is that you dont read the status of the switchs when you are looping around a to a. And i have put a loop in so that when any button is pressed it only clocks up one count. Wayne Hello Wayne, But i have the same problem, once i still with the finger in...

I built a Flowcode V4 version of the program...

I have the same problem on this version too ...

Maybe i will reinstall my old flowcode v4 again and build the project again in that version of flowcode, and see if it works with flowcode 4, if work the problem must be form flowcode v5 ..

Try this all i did was to add a loop to detect switch release and disabled the connection point,, try it if it does what you need try lowering the delays etc Hello dazz, Tanks for your post, but that solution doesn't work for me, in your solution the program stuck in that delay zone that you added ...

Hi Carlos, Try this update. Hello Wayne, Yes, your update works at certain point, once again when i speed up the delay you put do 100 ms instead 200 ms the program start to fail. and you change my go to point to another place, place there i don't want it there. I want to press the button and the pr...

Hi Try this :P Hope you fix your problem soon Hi wayne1971millard, tanks for helping... Indeed it works, basically you added a 1 second delay after decision INPUT > 0 ... And with 1 second it really work, but when i trie down that delay time, like 500 ms ou less the program start failing, sometimes...

Hi, Yes I can mask input to A0-2 only, no problem, i only include the lcd for debuging, not for final project, bu is strange, when i disable the "go to" funcion it works fine, and macro "Conta" works fine too.. I will run more tests on macro "conta" too, to try get some...

Okey DavidA... I Understand what you said how to debug my program file... and i did it... and i disabeled and enabeled, and disabeled and enabeled again, and i found the problem, in an anex file, i resend to you the project again, with with a display like you did to me, and an image. The problem liv...