Matrix user forums

Hello Benj, I can guarantee you that I found the same problem on the same microprocessor, identical revision and tested on several recent or older hardware that mount it ... To understand this, you need to do a direct test on the microprocessor at the hardware level. You should see that as activated...

Hello everyone, I saw this problem that is repeated for all versions of FC. I ask for confirmation of the reason! pic used 18f67k22 I attach two identical programs one with the active 4X PLL and another with the 4X PLL deactivated The problem is in the reading configuration of the ADC that I am forc...

Medelec but what version do you have of FC8? tells me you have compiled it with a newer version of 8.1 ... and that may not work!

I used ext osc. a 16 MHz PLL active a 4X ( 64MHz ).
To day i try your example

Thank you. I use the 18F67K22 and I have to emulate a PWM with a base frequency of 20 HZ. Thanks again

I see medelec, but the page link after not present server 404 error ! i not find example ...

Who can help me thanks, I have to generate a PWM signal with a base at 20HZ or 10 HZ and variable from 0 to 100% ... the original component of the micro does not make me go below 1000HZ. Thanks sorry the trouble.

Good evening everyone, I have a problem with the 24FJ series If I start a new program and I want to select one of the following cip 24FJ1024GA606 or 24FJ1024GA610 or 24FJ1024B606 or 24FJ1024B610 the 24FJ1024B610 with 100 pins is always selected in the program! I have to use 24FJ1024GA606 how do I do...

ok Banj, now it works Tuesday I install it in the processor and see if it also works on the board. For now, thanks and good week

I tried Benj, but the stopcounter of the module as I recall the simulator creates error

Benj, I tried, the timer now counts part and stops, but the reset? how you do it ? it's possible
or I have to consider that when the program runs on the microprocessor giving the stop timer it resets and starts again?
Thank you

Yes, now running ... i go try
Thank you Benj

Thank you Benj .. I await tomorrow

Hi Qmesar, it's not a compilation error ... the compiler says everything ok. Try the main program now simplified and you will see that the component when you bring to 1 the marker_01 does not count for 5-10 seconds and error.
Thanks again

Hello everyone, I'm trying to use the timer component but it does not work, it creates an error in the simulation and the variables do not change. Is it my mistake or does the component have problems?
I enclose the program and I look forward to it.
Complete it with xc8 V2.0
thx all

Hello Benj, no I do not have to restart, I have to close FC8.1 with the CRTL + ALT + DEL keys and kill FC. I do not have to restart the car. Hello petc, I configured in manual the paging size of W10 and now at least does not stop ...... as I return home I also try on the computer with 3 moniarro eve...

Hi benj, I thought that with the 8.1 version I could go back to using the simulation but nothing the problem persists. attached I send you the specifications of the computer I use. I use FC8.1 on two computers one prtatile (see the specifications in the photos) and one fixed with 3 monitors and alwa...

ok Daniel always fast and efficient
good job

Thanks Benj, I am waiting for a solution as possible
good job

Good evening, attached find two identical programs MTU_ECU_1_NEW with the compressed functions and compiler start time exceeding 3 minutes. :? MTU_ECU_1_NEW. non COMPRESSO with FC7 functions and 10 seconds compiler boot time! :roll: Needless to say, it would be a shame not to be able to use these fu...

Ok thx Benj now i try .. if i have the problem write you

hello, I tried but nothing to do ... even simplifying the instructions I receive the first two characters ascii & Y every now and then the string data that comes together &Y99, if I send &Y wait and then send the string data 99 then it works fine but I have to divide the controls and thi...

Thanks Modelec, do you have any small examples to see how to use it in the right way? thanks again good night

Good evening all pipol, I have a problem with the attached program. Can you understand or bend what happens? I have to receive the following command from the serial line &Y10 or &Y20 etc. &Y I put them as char to define the address while the other two are as string and I need to read the...

Ok Steve if and when you can in Italian was enough because the FC7 had it.
I continue to use it in English no problem.
Thank you