It is a great shame that the simulated RX and TX window for RS232 has gone and only a red and green arrows are now only shown.
Wayne
RS232
Moderator: Benj
-
medelec35
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
Re: RS232
Hi Wayne, have you read this:
http://www.matrixmultimedia.com/mmforum ... 77&#p50577
http://www.matrixmultimedia.com/mmforum ... 77&#p50577
Martin
-
kersing
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
Re: RS232
Is there no right button menu with a clear option? (Not near FC6 system so I can't check)
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
-
medelec35
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
Re: RS232
Hi Wayne,
The console window is scrolling all the time so when full, the top line (first in) moves out of the console, and a new line is added to the bottom.
There is a right click Clear Text option (Jac is correct, not bad for a guess
).
I will be honest.
I thought the console idea was bad at first as I preferred the way it was with V5.
I did suggest that the console should display simultaneous text, say from I2C and RS232 so the ability to add a whole new Tab group was added.
This made the idea of console better that it was in my eyes but I believe there are still improvements that can be made to it, before Im fully happy with it.
I would like at least one tab to faithfully simulate RS232 how it would appear in comms software like hyperterminal.
Reason for this is I use Rs232 for diagnostics and generally displaying multiple variable values and text on one line.
Currently with Console it's not possible.
However Ben did state:
I'm sure when all the tweaking has been done, it will be a shining example of a great product!
The console window is scrolling all the time so when full, the top line (first in) moves out of the console, and a new line is added to the bottom.
There is a right click Clear Text option (Jac is correct, not bad for a guess
).I will be honest.
I thought the console idea was bad at first as I preferred the way it was with V5.
I did suggest that the console should display simultaneous text, say from I2C and RS232 so the ability to add a whole new Tab group was added.
This made the idea of console better that it was in my eyes but I believe there are still improvements that can be made to it, before Im fully happy with it.
I would like at least one tab to faithfully simulate RS232 how it would appear in comms software like hyperterminal.
Reason for this is I use Rs232 for diagnostics and generally displaying multiple variable values and text on one line.
Currently with Console it's not possible.
However Ben did state:
I admire MatixMultimedia for making this open beta.Benj wrote:Remember it's a beta and we are looking to try and make a better product.
I'm sure when all the tweaking has been done, it will be a shining example of a great product!
Martin