Arduino duemilanve problem

[yutronic]

Hi,
I have managed to transfer simple blinking program to Arduino Duemilenove board (ATmega 328p). Simulation runs perfectly and LED is connected to pin 13 (Port D 7) but nothing happens.
Here is what I get:
==========================================================
Target folder: C:\DOCUME~1\Djordje\Desktop
Source name: C:\Documents and Settings\Djordje\Desktop\Blink31 flowcode v6.fcfx
Title:
Description:
Device: AVR.ATMEGA.ATMEGA328P
Generated by: Flowcode v6.0.9.0
Date: Monday, July 21, 2014 14:26:18
Users: 0
Registered to: 18767228
Licence key: 1XH0MZ
NOT FOR COMMERCIAL USE
http://www.matrixtsl.com
Launching the compiler...
C:\Program Files\Flowcode 6\compilers\avr\batchfiles\avra.bat atmega328p "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.elf" "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.c" "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.lst"
Launching compiler...

C:\DOCUME~1\Djordje\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-gcc.exe" -mmcu=atmega328p -Os -funsigned-char -o "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.elf" "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.c" -lm

C:\DOCUME~1\Djordje\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-objdump.exe" -S "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.elf" 1>"C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.lst"

C:\DOCUME~1\Djordje\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-size.exe" -B -d "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.elf"
text data bss dec hex filename
816 0 22 838 346 C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.elf

Compilation successful!
Completed compilation, return = 0

Launching the linker/assembler...
C:\Program Files\Flowcode 6\compilers\avr\batchfiles\avrb.bat "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.elf" "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.hex" "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.cof"

C:\DOCUME~1\Djordje\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-objcopy" -O ihex -R .eeprom "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.elf" "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.hex"

HEX file creation successful!

C:\DOCUME~1\Djordje\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-objcopy" -O coff-avr -R .eeprom "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.elf" "C:\DOCUME~1\Djordje\Desktop\Blink31 flowcode v6.cof"

COFF file creation successful!

Launching the programmer...
C:\Program Files\Flowcode 6\compilers\avr\batchfiles\avrc_arduinoA.bat m328p stk500 com3 57600 "Blink31 flowcode v6.hex"

C:\DOCUME~1\Djordje\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avrdude.exe" -p m328p -P com3 -b 57600 -c stk500 -U flash:w:"Blink31 flowcode v6.hex"
avrdude.exe: successfully opened stk500v1 device -- please use -c stk500v1

avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude.exe: Device signature = 0x1e950f
avrdude.exe: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude.exe: erasing chip
avrdude.exe: reading input file "Blink31 flowcode v6.hex"
avrdude.exe: input file Blink31 flowcode v6.hex auto detected as Intel Hex
avrdude.exe: writing flash (816 bytes):

Writing | ################################################## | 100% 0.44s

avrdude.exe: 816 bytes of flash written
avrdude.exe: verifying flash memory against Blink31 flowcode v6.hex:
avrdude.exe: load data flash data from input file Blink31 flowcode v6.hex:
avrdude.exe: input file Blink31 flowcode v6.hex auto detected as Intel Hex
avrdude.exe: input file Blink31 flowcode v6.hex contains 816 bytes
avrdude.exe: reading on-chip flash data:

Reading | ################################################## | 100% 0.36s

avrdude.exe: verifying ...
avrdude.exe: 816 bytes of flash verified

avrdude.exe done. Thank you.


Programming successful!
.

FINISHED
============================================================


>>>>NOTE <<<
When programmed with Arduino software works fine (Blinking prg )
Please help !

With best regards,
Djordje

P.S.
I did not manage to attach screenshots.

[Benj]

Hello,

Please can you attach your Flowcode program .fcfx file and I will have a look and see if I can spot what's causing the problem.

[yutronic]

Thank you so much. Here are also screenshots of setting files.

With best regards,
Djordje

[dazz]

Hi
Your output is on pin7 you need d13 which is pin(on chip) 19 or pb5 change it on the led properies

regards
Dazz

[yutronic]

Hi Duzz,
THANK YOU so much. I have mistaken Pin 13 with Digital 13 and overlooked it million times. Thank you. You were mos kind. All the best to you.

Best regards,
Djordje

[dazz]

Hi
Glad it's working, dont worry about the wrong pins we have all done it :):)