Page 1 of 1
flowcode v5 configure o pickti2
Posted: Fri Jan 27, 2012 7:44 pm
by brunoflow
Hello
How do I configure gravadr PICkit2 directly to program my board as it did in version 4.5
Re: flowcode v5 configure o pickti2
Posted: Mon Jan 30, 2012 9:35 am
by Steve
You should be able to use the same settings that you used for Flowcode V4.
Re: flowcode v5 configure o pickti2
Posted: Mon Jan 30, 2012 6:25 pm
by brunoflow
hello
then installed the version 4 when he asked which writer would like to use or PICkit2 eblook and I chose the PICkit2 and functioned normally in question would not release it to know what should I do?
Re: flowcode v5 configure o pickti2
Posted: Mon Jan 30, 2012 9:22 pm
by medelec35
Hi brunoflow,
Have you read instructions here:
http://www.matrixmultimedia.com/support ... 660e50a4fd
Martin
Re: flowcode v5 configure o pickti2
Posted: Tue Jan 31, 2012 6:59 pm
by brunoflow
Hello
I tried to configure as I tried but could not explain all forms so far not got any pictures of how success follows'm configuring hope you can help me
Re: flowcode v5 configure o pickti2
Posted: Wed Feb 01, 2012 9:53 am
by Steve
You also need to set the parameters entry according to that FAQ topic.