Matrix user forums

Hi All
I have a simple design for a future DFPlayer that is still in route.

I have a design that works in Flowcode 6 but when I load the PIC the LCD will not display the text.

I though I had a bad chip so I ordered new and the same results.
Here is what I have done.
1. Wired per my design on a bread board.
2. Tested the 16x2 LCD in another design and it works.
3. I have a little more work in sending the port codes to the DFplayer.
On a side note does anyone know on the DFplayer do I need to activate the "Play mode before I select the Segment to play?

Puzzled.

I have attached the LCD wiring and the Flowcode.
Must be missing something that I hope others can see.

Thank you
John

I found my error
As soon as I posted the information the light went on.
No Power outage just a memory glitch

I forgot to check the Oscillator settings.

Sorry to post without double checking my options.

John

Hi John,
Glad you have solved the case, nice one.
If you need help with the DFPlayer then let me know.