Page 1 of 1
bug in component HBRIDGE PIC16f1825
Posted: Wed Apr 10, 2019 9:53 am
by JustinS
I tested the HBRIDGE component on the PIC16F1938 processor. Works great.
I wanted to use it in another project based on the PIC16F1825 processor but unfortunately you can not even configure it
First of all, you can not choose a channel and therefore probably these problems.
Can You help me
Re: bug in component HBRIDGE PIC16f1825
Posted: Thu Apr 11, 2019 10:06 am
by Benj
Hi Justin,
Thanks for letting us know.
I have now found and hopefully fixed the problem for you and pushed the changes to the update system.
Let us know how you get on.
Re: bug in component HBRIDGE PIC16f1825
Posted: Thu Apr 11, 2019 10:40 am
by JustinS
Hi Benj
Thank you for fast help
now it works ok
One note
Why is TIMER2 available only?
It seemed to me that you can choose any Timer 2, 4, 6
Re: bug in component HBRIDGE PIC16f1825
Posted: Thu Apr 11, 2019 12:48 pm
by Benj
Hello,
Many thanks for letting me know. I have hopefully now fixed the additional problems too.
Timer selection and C/D alt pins were not enabled by default.
Re: bug in component HBRIDGE PIC16f1825
Posted: Thu Apr 11, 2019 3:24 pm
by JustinS
Hello,
Everything works now
Thanks
Justin
Re: bug in component HBRIDGE PIC16f1825
Posted: Thu Apr 25, 2019 7:55 am
by JustinS
Hello Benj
I checked for curiosity how the HBRIDGE component behaves with other ICs
It turned out that PIC 12F1822 is also not well served.
It has only the possibility of Half Bridge and it is shown correctly.
In the SETTINGS section there is no possibility to choose the Channel, Timer, Prescale
Could you correct it. PIC12F1822 is very small.
I wanted to make a miniature DDS generator