Page 1 of 1
Formula Flowcode buggy error on programming in FF8
Posted: Tue Oct 01, 2019 9:59 am
by koenvg
Flowcode mLoader is showing an error on programming the Formule Flowcode Buggy in Flowcode 8.2.
The laptops used for programming are running Windows 10 1903 Pro Education. Drivers are installed, device management shows the Formula Flowcode buggy.
Re: Formula Flowcode buggy error on programming in FF8
Posted: Mon Oct 07, 2019 5:27 pm
by Benj
Hello,
I've just tested this and it's working fine here. Can you send us your Flowcode project file and I will investigate what the cause might be.
Re: Formula Flowcode buggy error on programming in FF8
Posted: Tue Oct 08, 2019 8:45 am
by koenvg
Project is attached to this message.
Same project on windows 10 lstb 2016 is working fine.
Re: Formula Flowcode buggy error on programming in FF8
Posted: Tue Oct 08, 2019 9:47 am
by Benj
Hello,
Project looks fine and as it's working fine on another PC I can only assume it's down to the version of Windows. Are there updates you can apply to bring the Windows installation up to date?
The invalid CSV file warning is interesting. I'll see if I can work out what might be causing this.
As a side test you could try manually programming the Flowcode hex file using the BuggyProg software located within the Flowcode 8 installation.
Usually C:\Program Files (x86)\Flowcode 8\tools\Buggyprog\BuggyProg.exe
Let us know how you get on.
Re: Formula Flowcode buggy error on programming in FF8
Posted: Tue Oct 08, 2019 12:45 pm
by koenvg
The program BuggyProg sends the hex file without any problem, but the program is not executed on the buggy.
The program mLoader works fine on a windows 1903 Home edition and the hex is executed correctly on the buggy.
The program mLoader is nog working on a windows 1903 Pro education laptop.