Matrix user forums

Posted: **Mon Jan 11, 2010 2:02 pm**

Hi everybody

I have a 18F6527 and I use the two UART. I would like to use the two uart in interrupt mode.
With only one, it works very well ( I juste have to add "set_bit(intcon, PEIE);" at the top of my program ).

I made some modification on the FCD file to add the second interrupt but if I use the two of them in my program, neither works

I attached my FCD file if somebody can have a look.

Thank you for your help !

Posted: **Tue Jan 12, 2010 11:14 am**

Hello

Your modified FCD looks ok to me. Something you could try is to manually perform a character read from both UART components before enabling the interrupt. This should clear any potential errors on the bus and hopefully allow the interrupts to start working.

Let me know how you get on.

Posted: **Mon Jan 18, 2010 4:59 pm**

Hi Benj,

I already performed a character read from both UART without any sucess.

If I delete those character read and if I add this code at the top of the program.....it works !

Code: Select all

st_bit(intcon, PEIE);
st_bit(rcsta, SPEN);
st_bit(rcsta, CREN);
st_bit(rcsta2, SPEN);
st_bit(rcsta2, CREN);

Matrix user forums

Interrupt on 2 UART

Interrupt on 2 UART

Re: Interrupt on 2 UART

Re: Interrupt on 2 UART