Component: Digital Potentiometer (MCP45XX / MCP46XX) (Analog Output)

From Flowcode Help
Jump to navigationJump to search
Author Matrix TSL
Version 1.0
Category Analog Output


Digital Potentiometer (MCP45XX / MCP46XX) component

The MCP45XX and MCP46XX device range supports up to 2 digital potentiometers or rheostat outputs. 129 or 257 possible output resistance values for each channel.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_MCP45xx_46xx_Digital_Pot.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_MCP45xx_46xx_Digital_Pot.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples







Macro reference

DecrementWiper

Fc9-comp-macro.png DecrementWiper
Decrements a single volatile wiper value 
Fc9-u8-icon.png - BYTE Index
Range: 0-1 
Fc9-void-icon.png - VOID Return


IncrementWiper

Fc9-comp-macro.png IncrementWiper
Increments a single volatile wiper value 
Fc9-u8-icon.png - BYTE Index
Range: 0-1 
Fc9-void-icon.png - VOID Return


Initialise

Fc9-comp-macro.png Initialise
Startup the I2C peripheral ready for communications. 
Fc9-void-icon.png - VOID Return


ReadAddress

Fc9-comp-macro.png ReadAddress
Reads a value from one of the registers on the device 
Fc9-u8-icon.png - BYTE Address
Range: 0-15 
Fc9-u16-icon.png - UINT Return


SetWiper

Fc9-comp-macro.png SetWiper
Sets the value of a single wiper 
Fc9-u8-icon.png - BYTE Index
Range: 0-1 
Fc9-u16-icon.png - UINT Value
129 Taps Range: 0-128 / 257 Taps Range: 0-256 
Fc9-bool-icon.png - BOOL MemoryType
0=Volatile, 1=Nonvolatile 
Fc9-void-icon.png - VOID Return


WriteAddress

Fc9-comp-macro.png WriteAddress
Writes a value to one of the registers on the device 
Fc9-u8-icon.png - BYTE Address
Range: 0-15 
Fc9-u16-icon.png - UINT Value
Range: 0-256 
Fc9-void-icon.png - VOID Return


Property reference

Fc9-prop-icon.png Properties
Fc9-conn-icon.png I2C Properties
Fc9-type-16-icon.png Channel
Channel selection 
Fc9-type-5-icon.png SDA
Pin used for SDA (data signal) 
Fc9-type-5-icon.png SCL
Pin used for SCL (clock signal) 
Fc9-type-16-icon.png Baud Select
Baud rate option selector 
Fc9-type-14-icon.png Baud Rate
Baud rate to be used 
Fc9-type-7-icon.png Stop Delay
On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not a 10ms delay between an I2C stop event and the next I2C start event. Most modern microcontrollers will not have a problem so this property can be disabled to speed up the I2C communications.  
Fc9-conn-icon.png Device Properties
Fc9-type-16-icon.png Number of Outputs
 
Fc9-type-16-icon.png Number of Taps
 
Fc9-type-16-icon.png Address Bits
 
Fc9-conn-icon.png Simulation
Fc9-type-7-icon.png Simulate Comms