Component: E block Helper (E blocks 1)

Author	Matrix Ltd
Version	1.1
Category	E-blocks 1

E-block Helper component

A purely cosmetic component to help simplify E-block connections without having to keep referring to the datasheets. Specify which E-block your using and the component will give you options for the patch settings and display the connections required.

Detailed description

No detailed description exists yet for this component

Examples

Example of E-blocks helper component being used to determine connections.

Downloadable macro reference

	ReceiveCount
Returns the number of bytes currently sat waiting in the receive buffer.
- UINT	Return

	ReadString
Copies the incoming data from the data string array to a local string variable.
- BYTE	NumBytes
Maximum number of bytes to try and read
- STRING	Return

	SendByte
Sends a single data byte out to the Bluetooth module.
- BYTE	Data
- VOID	Return

	EnterCommandMode
Enters command mode allowing commands to be sent using the SendCommand macro. Returns: 0 = No Reply / 1 = Command Mode OK
[[File:]] -	Return

	WaitForStringValue
Allows us to wait and check for an incoming value. Returns 1 if the string value is found otherwise returns 0.
- STRING	Value
String value to look for
- UINT	Timeout
Length of time to wait in milliseconds
[[File:]] -	Return

	GetMACAddress
Gets the local Bluetooth device MAC address.
- STRING	Return

	Initialise
Sets up the Bluetooth module including: - Enabling the UART - Configuring the module (Name / Key / etc) Returns 1 for OK and 0 for no reply.
- BYTE	Return

	Start
Startup routine required by the hardware device. Automatically clears the display after initialising.
- VOID	Return

	SetLEDState
Sets the state of a single LED
- BYTE	Port
0 = PortA, 1 = PortB
- BYTE	LED
0 = LED0, 7 = LED7
- BYTE	State
- VOID	Return

	GetRxIdent
Gets the Rx ID as a Integer Standard and Extended IDs.
- BYTE	Buffer
- ULONG	Return

	Initialise
Must be called before any other CAN component macros to enable and initialise the CAN peripheral.
- VOID	Return

Property reference

	Properties
	E-block ID
E-block product ID
	E-block Name
Cosmetic name of the E-block to confirm you have the correct board.
	Bit 0
Port 1 Bit 0
	Bit 1
Port 1 Bit 1
	Bit 2
Port 1 Bit 2
	Bit 3
Port 1 Bit 3
	Bit 4
Port 1 Bit 4
	Bit 5
Port 1 Bit 5
	Bit 6
Port 1 Bit 6
	Bit 7
Port 1 Bit 7
	Bit 0
Port 2 Bit 0
	Bit 1
Port 2 Bit 1
	Bit 2
Port 2 Bit 2
	Bit 3
Port 2 Bit 3
	Bit 4
Port 2 Bit 4
	Bit 5
Port 2 Bit 5
	Bit 6
Port 2 Bit 6
	Bit 7
Port 2 Bit 7
	Connections
	Simulations