Difference between revisions of "Component: FTDI (FTD2XX) (Third Party)"

Latest revision as of 17:26, 9 November 2022

Author	Matrix Ltd
Version	1.0
Category	Third Party

FTDI (FTD2XX) component

Simulation only interface to allow communications with a FTDI USB 232 IC connected to the system. For more details refer to the D2XX_Programmers_Guide from FTDI.

Component Pack

COMMSA

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Downloadable macro reference

	FT_GetStatus
Gets the device status including number of characters in the receive queue, number of characters in the transmit queue, and the current event status.
- LONG	Handle
Handle of the device.
- LONG	RxQueueLength
Pointer to a variable of type DWORD which receives the number of characters in the receive queue.
- LONG	TxQueueLength
Pointer to a variable of type DWORD which receives the number of characters in the transmit queue.
- LONG	EventStatus
Pointer to a variable of type DWORD which receives the current state of the event status.
- BYTE	Return

	FT_ClrRts
This function clears the Request To Send (RTS) control signal.
- LONG	Handle
Handle of the device.
- VOID	Return

	FT_Write
Write data to the device.
- LONG	Handle
Handle of the device.
- BYTE	Buffer
Pointer to the buffer that contains the data to be written to the device.
- ULONG	Bytes
Number of bytes to write to the device.
- ULONG	Count
Pointer to a variable of type DWORD which receives the number of bytes written to the device.
- BYTE	Return

	FT_Read
Read data from the device.
- LONG	Handle
Handle of the device.
- BYTE	Buffer
Pointer to the buffer that receives the data from the device.
- ULONG	Bytes
Number of bytes to be read from the device.
- ULONG	Count
Pointer to a variable of type DWORD which receives the number of bytes read from the device.
- BYTE	Return

	FT_SetFlowControl
This function sets the flow control for the device.
- LONG	Handle
Handle of the device.
- UINT	FlowControl
Flow setting 0=None, 0x0100=RTS/CTS, 0x0200=DTR/DSR, 0x0400=XON/XOFF
- BYTE	Xon
Character used to signal Xon. Only used if flow control is Xon/Xoff
- BYTE	Xoff
Character used to signal Xoff. Only used if flow control is Xon/Xoff
- BYTE	Return

	FT_GetModemStatus
Gets the modem status and line status from the device.
- LONG	Handle
Handle of the device.
- LONG	ModemStatus
Pointer to a variable of type DWORD which receives the modem status and line status from the device.
- BYTE	Return

	FT_SetBreakOn
Sets the BREAK condition for the device.
- LONG	Handle
Handle of the device.
- BYTE	Return

	FT_CreateDeviceInfoList
This function builds a device information list and returns the number of D2XX devices connected to the system. The list contains information about both unopen and open devices.
- LONG	DevCount
Unsigned long array used to store the number of devices connected
- BYTE	Return

	FT_SetTimeouts
This function sets the read and write timeouts for the device.
- LONG	Handle
Handle of the device.
- LONG	ReadTimeout
Read timeout in milliseconds.
- LONG	WriteTimeout
Write timeout in milliseconds.
- BYTE	Return

	FT_SetBitMode
Enables different chip modes.
- LONG	Handle
Handle of the device.
- BYTE	Mask
Required value for bit mode mask. This sets up which bits are inputs and outputs. A bit value of 0 sets the corresponding pin to an input, a bit value of 1 sets the corresponding pin to an output.
- BYTE	Mode
0=Reset / 1=AsyncBB / 2=MPSSE / 4=SyncBB / 8=MCUHost / 16=FastOpto / 32=CBUS / 64=SyncFIFO
- BYTE	Return

	FT_SetRts
This function sets the Request To Send (RTS) control signal.
- LONG	Handle
Handle of the device.
- BYTE	Return

	FT_GetDeviceInfoDetail
This function returns an entry from the device information list.
- ULONG	Index
Index of the entry in the device info list.
- ULONG	Flags
Pointer to unsigned long to store the flag value.
- ULONG	Type
Pointer to unsigned long to store device type.
- ULONG	ID
Pointer to unsigned long to store device ID.
- ULONG	LocID
Pointer to unsigned long to store the device location ID.
- BYTE	SerNum
Pointer to buffer to store device serial number as a null terminated string
- BYTE	Descript
Pointer to buffer to store device description as a null-terminated string
- LONG	TempHandle
Pointer to a variable of type FT_HANDLE where the handle will be stored
- BYTE	Return

	FT_Close
Close an open device.
- LONG	Handle
Handle of the device.
- BYTE	Return

	FT_ClrDtr
This function clears the Data Terminal Ready (DTR) control signal.
- LONG	Handle
Handle of the device.
- BYTE	Return

	FT_Purge
This function purges receive and transmit buffers in the device.
- LONG	Handle
Handle of the device.
- LONG	Mask
Used to determine which buffer to purge, 1=Rx / 2=Tx / 3=Both
- BYTE	Return

	FT_GetQueueStatus
Gets the number of bytes in the receive queue.
- LONG	Handle
Handle of the device.
- LONG	RxQueueLength
Pointer to a variable of type DWORD which receives the number of bytes in the receive queue.
- BYTE	Return

	FT_SetDataCharacteristics
This function sets the data characteristics for the device.
- LONG	Handle
Handle of the device.
- BYTE	WordLength
Number of bits per word - Must be 7 or 8
- BYTE	StopBits
Number of stop bits - Must be 1 or 2
- BYTE	Parity
Parity 0=None / 1=Odd / 2=Even / 3=Mark / 4=Space
- BYTE	Return

	FT_SetBreakOff
Resets the BREAK condition for the device.
- LONG	Handle
Handle of the device.
- BYTE	Return

	FT_SetDivisor
This function sets the baud rate for the device. It is used to set non-standard baud rates.
- LONG	Handle
Handle of the device.
- UINT	Divisor
Divisor.
- BYTE	Return

	FT_SetBaudRate
This function sets the baud rate for the device.
- LONG	Handle
Handle of the device.
- ULONG	BaudRate
Baud rate.
- BYTE	Return

	FT_SetDtr
This function sets the Data Terminal Ready (DTR) control signal.
- LONG	Handle
Handle of the device.
- BYTE	Return

	FT_Open
Open the device and return a handle which will be used for subsequent accesses.
- INT	Device
Index of the device to open. Indices are 0 based.
- LONG	ft_Handle
Pointer to a variable of type FT_HANDLE where the handle will be stored. This handle must be used to access the device.
- BYTE	Return

	ScanFor232
Scans for a FTDI D2XX device, returnes true if at least one device was found.
- BOOL	Return

	FT_ResetDevice
This function sends a reset command to the device.
- LONG	Handle
Handle of the device.
- BYTE	Return

	FT_SetChars
This function sets the special characters for the device.
- LONG	Handle
Handle of the device.
- BYTE	EventCh
Event character.
- BYTE	EventChEn
0 if event character disabled, non-zero otherwise.
- BYTE	ErrorCh
Error character.
- BYTE	ErrorChEn
0 if error character disabled, non-zero otherwise.
- BYTE	Return

Property reference

	Properties
	Label
A text label for the component's panel component.

Difference between revisions of "Component: FTDI (FTD2XX) (Third Party)"

Latest revision as of 17:26, 9 November 2022

Contents

FTDI (FTD2XX) component

Component Pack

Detailed description

Examples

Downloadable macro reference

Property reference

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools

@@ Line 14: / Line 14: @@
 ==FTDI (FTD2XX) component==
 Simulation only interface to allow communications with a FTDI USB 232 IC connected to the system. For more details refer to the D2XX_Programmers_Guide from FTDI.
+==Component Pack==
+COMMSA
 ==Detailed description==
@@ Line 22: / Line 36: @@
 ==Examples==
@@ Line 39: / Line 63: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
 | colspan="2" | Handle of the device.&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | RxQueueLength
 |-
 | colspan="2" | Pointer to a variable of type DWORD which receives the number of characters in the receive queue.&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | TxQueueLength
 |-
 | colspan="2" | Pointer to a variable of type DWORD which receives the number of characters in the transmit queue.&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | EventStatus
 |-
@@ Line 72: / Line 96: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 90: / Line 114: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 123: / Line 147: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 156: / Line 180: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 189: / Line 213: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
 | colspan="2" | Handle of the device.&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | ModemStatus
 |-
@@ Line 212: / Line 236: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 230: / Line 254: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | DevCount
 |-
@@ Line 248: / Line 272: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
 | colspan="2" | Handle of the device.&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | ReadTimeout
 |-
 | colspan="2" | Read timeout in milliseconds.&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | WriteTimeout
 |-
@@ Line 276: / Line 300: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 304: / Line 328: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 357: / Line 381: @@
 | colspan="2" | Pointer to buffer to store device description as a null-terminated string&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | TempHandle
 |-
@@ Line 375: / Line 399: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 393: / Line 417: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 411: / Line 435: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
 | colspan="2" | Handle of the device.&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Mask
 |-
@@ Line 434: / Line 458: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
 | colspan="2" | Handle of the device.&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | RxQueueLength
 |-
@@ Line 457: / Line 481: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 490: / Line 514: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 508: / Line 532: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 531: / Line 555: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 554: / Line 578: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 572: / Line 596: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s16-icon.png]] - INT
 | width="90%" | Device
 |-
 | colspan="2" | Index of the device to open.  Indices are 0 based.&nbsp;
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | ft_Handle
 |-
@@ Line 595: / Line 619: @@
 |-
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-bool-icon.png]] - BOOL
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
@@ Line 608: / Line 632: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 626: / Line 650: @@
 |-
 |-
-| width="10%" align="center" | [[File:]] -
+| width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG
 | width="90%" | Handle
 |-
@@ Line 652: / Line 676: @@
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''DrawRectangle'''
-|-
-| colspan="2" | Draws a rectangle with the current foreground colour from pixel loaction X1, Y1 to pixel location X2, Y2.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | X1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Y1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | X2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Y2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Transparent
-|-
-| colspan="2" | Chooses the transparency of the box - 0 = Box contains background colour, 1 = Box contains previous pixel data.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Solid
-|-
-| colspan="2" | Chooses to fill the box with colour - 0 = Box contains transparency data, 1 = Box contains foreground colour.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | The Init macro must be called once to initialise the Graphical LCD display before any other Graphical LCD component macros are called.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetForegroundColour'''
-|-
-| colspan="2" | Specifies the colour of the foreground by creating a mixture of red, green and blue. &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | PixelColour
-|-
-| colspan="2" | 0=White, 1=Black&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''DrawRectangle'''
-|-
-| colspan="2" | Draws a rectangle with the current foreground colour from pixel loaction X1, Y1 to pixel location X2, Y2&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | X1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Y1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | X2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Y2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Transparent
-|-
-| colspan="2" | Chooses the transparency of the box - 0 = Box contains background colour, 1 = Box contains previous pixel data.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Solid
-|-
-| colspan="2" | Chooses to fill the box with colour - 0 = Box contains transparency data, 1 = Box contains foreground colour.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | The Init macro must be called once to initialise the Graphical LCD display before any other Graphical LCD component macros are called.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | The Init macro must be called once to initialise the Graphical LCD display before any other Graphical LCD component macros are called.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | The Init macro must be called once to initialise the Graphical LCD display before any other Graphical LCD component macros are called.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | The Init macro must be called once to initialise the Graphical LCD display before any other Graphical LCD component macros are called.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODPMSHAPE'''
-|-
-| colspan="2" | Sets PM waveform shape to; 0 = SINE, 1 = SQUARE, 2 = RAMPUP, 3 = RAMPDN, 4 = TRIANG, 5 = NOISE, 6 = DC, 7 = SINC, 8 = EXPRISE, 9 = LOGRISE, 10 = ARB1,  11 = ARB2, 12 = ARB3, 13= ARB4.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Shape
-|-
-| colspan="2" | Sets PM waveform shape (1 = SINE, 2 = SQUARE, 3 = RAMPUP, 4 = RAMPDN, 5 = TRIANG, 6 = NOISE, 7 = DC, 8 = SINC, 9 = EXPRISE, 10 = LOGRISE, 11 = ARB1, 12 = ARB2, 13 = ARB3, 14= ARB4).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB4'''
-|-
-| colspan="2" | Loads the binary-data to an existing arbitrary waveform memory location ARB4.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Waveform
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CLKSRRet'''
-|-
-| colspan="2" | Returns the clock source <INT> or <EXT>.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODPMDEV'''
-|-
-| colspan="2" | Sets PM waveform deviation to <nrf> degrees. (Lower limit: -360° - Upper limit: 360°).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Degrees
-|-
-| colspan="2" | Sets PM waveform deviation in degrees (-360 - 360).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MSTLOCK'''
-|-
-| colspan="2" | Sends signal to SLAVE generator to get synchronised&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''HILVL'''
-|-
-| colspan="2" | Sets the amplitude-high-level to <nrf> Volts. (Lower limit: -0.490 V - Upper limit: 5.000 V).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | HighLevel
-|-
-| colspan="2" | Sets the amplitude-high-level in Volts(V) (-0.490 V - 5.000 V).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB3'''
-|-
-| colspan="2" | Loads the binary-data to an existing arbitrary waveform memory location ARB3.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Waveform
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''WAVE'''
-|-
-| colspan="2" | Sets the waveform type.  0 = SINE, 1 = SQUARE, 2 = RAMP, 3 = TRIANG, 4 = PULSE, 5 = NOISE, 6 = ARB&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | WaveType
-|-
-| colspan="2" | 0 = SINE, 1 = SQUARE, 2 = RAMP, 3 = TRIANG, 4 = PULSE, 5 = NOISE, 6 = ARB.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CALADJ'''
-|-
-| colspan="2" | Adjust the selected calibration value by <nrf> (Lower limit: -100 - Upper limit: 100).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Calibrate
-|-
-| colspan="2" | Adjust the selected calibration value (-100 - 100).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''STBRet'''
-|-
-| colspan="2" | Returns the value of the Status Byte Register in <nr1> numeric format.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB2'''
-|-
-| colspan="2" | Loads the binary-data to an existing arbitrary waveform memory location ARB2.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Waveform
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''EERRet'''
-|-
-| colspan="2" | Query and clear execution error number register.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODFMSRC'''
-|-
-| colspan="2" | Sets FM waveform source to; 0 INT, 1 = EXT.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Source
-|-
-| colspan="2" | Sets FM waveform source (0 = INT, 1 = EXT).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODAMFREQ'''
-|-
-| colspan="2" | Sets AM waveform frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 20kHz).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Frequency
-|-
-| colspan="2" | Sets AM waveform frequency in Hertz(Hz) (1uHz - 20kHz).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ESE'''
-|-
-| colspan="2" | Sets the Standard Event Status Enable Register to the value of <nrf>.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Value
-|-
-| colspan="2" | Value of register 0-255&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB1'''
-|-
-| colspan="2" | Loads the binary-data to an existing arbitrary waveform memory location ARB1.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Waveform
-|-
-| colspan="2" | 16 Bit binary number for arbitrary waveform.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB4DEFRet'''
-|-
-| colspan="2" | Returns user specified waveform name, waveform pint interpolation state and waveform length of ARB4.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CLS'''
-|-
-| colspan="2" | Clears status byte register of the interface.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MSTRELOCK'''
-|-
-| colspan="2" | Resynchronises the two generators in MASTER-SLAVE mode.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''NOISLVL'''
-|-
-| colspan="2" | Sets the output noise level to <nr1> %. (Lower limit: 0% - Upper limit: 50%)&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Percent
-|-
-| colspan="2" | Sets the output noise level in percent. (0 - 50)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LOCKMODE'''
-|-
-| colspan="2" | Sets the synchronising mode to; 0 = MASTER, 1 = SLAVE, 2 = INDEP.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Mode
-|-
-| colspan="2" | Sets the synchronising mode (0 = MASTER, 1 = SLAVE, 2 = INDEP).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADDRESSRet'''
-|-
-| colspan="2" | Returns the instruments address&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODPMSRC'''
-|-
-| colspan="2" | Sets PM waveform source to; 0 INT, 1 = EXT.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Source
-|-
-| colspan="2" | Sets PM waveform source (0 = INT, 1 = EXT).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODPWMSRC'''
-|-
-| colspan="2" | Sets PWM waveform source to; 0 = INT, 1 = EXT.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Source
-|-
-| colspan="2" | Sets PWM waveform source (0 = INT, 1 = EXT).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MOD'''
-|-
-| colspan="2" | Sets modulation to; 0 = OFF, 1 = AM, 2 = FM, 3 = PM, 4 = FSK, 5 = PWM.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Modulation
-|-
-| colspan="2" | Sets modulation (0 = OFF, 1 = AM, 2 = FM, 3 = PM, 4 = FSK, 5 = PWM).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ISTRet'''
-|-
-| colspan="2" | Returns IST local message as defined by IEEE Std. 488.2. The syntax of the response is 0<rmt>, if the local message is false, or 1<rmt>, if the local message is true.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LRNRet'''
-|-
-| colspan="2" | Returns the complete setup of the instrument as a binary data block&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OPCRet'''
-|-
-| colspan="2" | Query Operation Complete status. The response is always 1<rmt> and will be available immediately the command is executed because all commands are sequential.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SWPTYPE'''
-|-
-| colspan="2" | Sets the sweep type to; 0 = LINUP, 1 = LINDN, 2 = LINUPDN, 3 = LINDNUP, 4 = LOGUP, 5 = LOGDN, 6 = LOGUPDN, 7 = LOGDNUP.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Type
-|-
-| colspan="2" | Set the sweep type (0 = LINUP, 1 = LINDN, 2 = LINUPDN, 3 = LINDNUP, 4 = LOGUP, 5 = LOGDN, 6 = LOGUPDN, 7 = LOGDNUP).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PULSRANGE'''
-|-
-| colspan="2" | Sets PWM waveform source to <1>, <2> or <3>; 1 = 1, 2 = 2, 3 = 3.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Range
-|-
-| colspan="2" | Sets the pulse rise and fall range. (1, 2 or 3)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TSTRet'''
-|-
-| colspan="2" | The generator has no self test capability and the response is always 0 <rmt>.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''BSTTRGPOL'''
-|-
-| colspan="2" | Sets the burst trigger slope to; 0 = POS, 1 = NEG.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Slope
-|-
-| colspan="2" | Set the burst trigger slope (0 = POS, 1 = NEG).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB3Ret'''
-|-
-| colspan="2" | Returns the binary-data from an existing abbitrary wavefrom memory location.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''BSTPHASE'''
-|-
-| colspan="2" | Sets the burst phase to <nrf> degrees. (Lower limit: -360 - Upper limit: 360)&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Degrees
-|-
-| colspan="2" | Sets the burst phase in degrees (-360 - 360)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IDNRet'''
-|-
-| colspan="2" | Returns the instrument identification. The IDN is saved to the variable passed from the function 'ReturnIDN'. The return parameter is TRUE when the IDN is successfully returned.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" | ReturnIDN
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SWPTRGPER'''
-|-
-| colspan="2" | Sets the sweep trigger period to <nrf> seconds&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Seconds
-|-
-| colspan="2" | Set the sweep trigger period in seconds.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PULSDLY'''
-|-
-| colspan="2" | Sets the waveform delay to <nrf> sec&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Sec
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Opens the COM port ready for communications.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
@@ Line 1,492: / Line 694: @@
 |-
 | colspan="2" | A text label for the component's panel component.&nbsp;
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Connections'''
-|-
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Simulations'''
-|-
 |}