Difference between revisions of "Component: Webserver (W5500) (Comms: Networking)"

Latest revision as of 17:25, 9 November 2022

Author	Matrix Ltd.
Version	1.0
Category	Comms: Networking

Webserver component

Webserver component designed to work with the W5500 module from Wiznet, as use by the ETH WIZ Click Module. Provides a very simple interface to allow webpages to be hosted from hardware or simulation.

Component Pack

COMMSC

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Downloadable macro reference

	WM_TXMEM

- BYTE	ch

- UINT	Return

	SetOutValue
Set the value of an outbound substitution string
- BYTE	index

- STRING	value

- VOID	Return

	Send_Embedded_HTML_Page4

- VOID	Return

	Send_Embedded_HTML_Page3

- VOID	Return

	Send_Embedded_HTML_Page2

- VOID	Return

	Send_Embedded_HTML_Page1

- VOID	Return

	GetInValue
Returns the string value of a Request parameter
- BYTE	index

- STRING	Return

	CreateServerSocket
Creates a listening socket on the selected channel and port ready to accept incoming web page requests.
- BYTE	Channel

- UINT	Port

- BYTE	Return

	IncRxPtr

- BYTE	Channel

- VOID	Return

	CheckSocketActivity
Checks for activity on the server socket and serves out the webpages to any requesting parties.
- BYTE	Return

	Initialise
Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros
- VOID	Return

Property reference

	Properties
	HTML Source
	Max Pages
Maximum number of pages we can serve using the embedded page type webserver.
	Name Page 1
Name of HTML page 1 - index.htm is the default page that will be presented.
	HTML Page 1
Embedded HTML code used for page 1
	Name Page 2
Name of HTML page 2
	HTML Page 2
Embedded HTML code used for page 2
	Name Page 3
Name of HTML page 3
	HTML Page 3
Embedded HTML code used for page 3
	Name Page 4
Name of HTML page 4
	HTML Page 4
Embedded HTML code used for page 4
	Connections
	Channel
SPI Channel selector
	Prescale
Prescale option selector
	MOSI
SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.
	MISO
SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.
	CLK
SPI Clock Pin CLK - The Clock signal is driven by the SPI master.
	CS / SS
Chip Select / Slave Select Pin Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device.
	Int Pin
Interrupt pin connection on Wiznet module
	Gateway IP
	Gateway0
IP address of the gateway to the internet if applicable.
	Gateway1
IP address of the gateway to the internet if applicable.
	Gateway2
IP address of the gateway to the internet if applicable.
	Gateway3
IP address of the gateway to the internet if applicable.
	Subnet Mask
	Subnet0
Subnet mask of the server - usually 255.255.255.0
	Subnet1
Subnet mask of the server - usually 255.255.255.0
	Subnet2
Subnet mask of the server - usually 255.255.255.0
	Subnet3
Subnet mask of the server - usually 255.255.255.0
	IP Address
	IP0
IP address of the server - usually 192.168.0.x or 192.168.1.x
	IP1
IP address of the server - usually 192.168.0.x or 192.168.1.x
	IP2
IP address of the server - usually 192.168.0.x or 192.168.1.x
	IP3
IP address of the server - usually 192.168.0.x or 192.168.1.x
	MAC Address
	MAC0
MAC address of the server
	MAC1
MAC address of the server
	MAC2
MAC address of the server
	MAC3
MAC address of the server
	MAC4
MAC address of the server
	MAC5
MAC address of the server
	Substitutions
	Outgoing
	Count
Maximum number of outbound string substitutions
	Length 0
Number of bytes to reserve for data string.
	Length 1
Number of bytes to reserve for data string.
	Length 2
Number of bytes to reserve for data string.
	Incoming
	Count
Maximum number of inbound string substitutions
	Length 0
Number of bytes to reserve for data string.
	Simulation
	Label
Label used to help identify the component on the panel.
	Sim Type
Decides how to perform the simulation of the component. TCP IP - Communicates using the Windows TCP IP communications DLL SPI / Injector - Communicates using the CAL SPI to allow the communications to be analysed and debugged.
	TCP Simulation
	Network Interface
List of network interfaces connected to the PC. Sets which interface we are communicating via.

Difference between revisions of "Component: Webserver (W5500) (Comms: Networking)"

Latest revision as of 17:25, 9 November 2022

Contents

Webserver component

Component Pack

Detailed description

Examples

Downloadable macro reference

Property reference

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools

@@ Line 14: / Line 14: @@
 ==Webserver component==
 Webserver component designed to work with the W5500 module from Wiznet,  as use by the ETH WIZ Click Module. Provides a very simple interface to allow webpages to be hosted from hardware or simulation.
+==Component Pack==
+COMMSC
 ==Detailed description==
@@ Line 22: / Line 36: @@
 ==Examples==
@@ Line 202: / Line 226: @@
 |-
 | colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''WM_RXMEM'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | ch
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODPMSHAPE'''
-|-
-| colspan="2" | Sets PM waveform shape to; 0 = SINE, 1 = SQUARE, 2 = RAMPUP, 3 = RAMPDN, 4 = TRIANG, 5 = NOISE, 6 = DC, 7 = SINC, 8 = EXPRISE, 9 = LOGRISE, 10 = ARB1,  11 = ARB2, 12 = ARB3, 13= ARB4.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Shape
-|-
-| colspan="2" | Sets PM waveform shape (1 = SINE, 2 = SQUARE, 3 = RAMPUP, 4 = RAMPDN, 5 = TRIANG, 6 = NOISE, 7 = DC, 8 = SINC, 9 = EXPRISE, 10 = LOGRISE, 11 = ARB1, 12 = ARB2, 13 = ARB3, 14= ARB4).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB4'''
-|-
-| colspan="2" | Loads the binary-data to an existing arbitrary waveform memory location ARB4.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Waveform
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CLKSRRet'''
-|-
-| colspan="2" | Returns the clock source <INT> or <EXT>.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODPMDEV'''
-|-
-| colspan="2" | Sets PM waveform deviation to <nrf> degrees. (Lower limit: -360° - Upper limit: 360°).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Degrees
-|-
-| colspan="2" | Sets PM waveform deviation in degrees (-360 - 360).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MSTLOCK'''
-|-
-| colspan="2" | Sends signal to SLAVE generator to get synchronised&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''HILVL'''
-|-
-| colspan="2" | Sets the amplitude-high-level to <nrf> Volts. (Lower limit: -0.490 V - Upper limit: 5.000 V).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | HighLevel
-|-
-| colspan="2" | Sets the amplitude-high-level in Volts(V) (-0.490 V - 5.000 V).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB3'''
-|-
-| colspan="2" | Loads the binary-data to an existing arbitrary waveform memory location ARB3.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Waveform
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''WAVE'''
-|-
-| colspan="2" | Sets the waveform type.  0 = SINE, 1 = SQUARE, 2 = RAMP, 3 = TRIANG, 4 = PULSE, 5 = NOISE, 6 = ARB&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | WaveType
-|-
-| colspan="2" | 0 = SINE, 1 = SQUARE, 2 = RAMP, 3 = TRIANG, 4 = PULSE, 5 = NOISE, 6 = ARB.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CALADJ'''
-|-
-| colspan="2" | Adjust the selected calibration value by <nrf> (Lower limit: -100 - Upper limit: 100).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Calibrate
-|-
-| colspan="2" | Adjust the selected calibration value (-100 - 100).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''STBRet'''
-|-
-| colspan="2" | Returns the value of the Status Byte Register in <nr1> numeric format.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB2'''
-|-
-| colspan="2" | Loads the binary-data to an existing arbitrary waveform memory location ARB2.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Waveform
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''EERRet'''
-|-
-| colspan="2" | Query and clear execution error number register.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODFMSRC'''
-|-
-| colspan="2" | Sets FM waveform source to; 0 INT, 1 = EXT.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Source
-|-
-| colspan="2" | Sets FM waveform source (0 = INT, 1 = EXT).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODAMFREQ'''
-|-
-| colspan="2" | Sets AM waveform frequency to <nrf> Hz. (Lower limit: 1uHz - Upper limit: 20kHz).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Frequency
-|-
-| colspan="2" | Sets AM waveform frequency in Hertz(Hz) (1uHz - 20kHz).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ESE'''
-|-
-| colspan="2" | Sets the Standard Event Status Enable Register to the value of <nrf>.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Value
-|-
-| colspan="2" | Value of register 0-255&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB1'''
-|-
-| colspan="2" | Loads the binary-data to an existing arbitrary waveform memory location ARB1.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Waveform
-|-
-| colspan="2" | 16 Bit binary number for arbitrary waveform.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB4DEFRet'''
-|-
-| colspan="2" | Returns user specified waveform name, waveform pint interpolation state and waveform length of ARB4.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CLS'''
-|-
-| colspan="2" | Clears status byte register of the interface.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MSTRELOCK'''
-|-
-| colspan="2" | Resynchronises the two generators in MASTER-SLAVE mode.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''NOISLVL'''
-|-
-| colspan="2" | Sets the output noise level to <nr1> %. (Lower limit: 0% - Upper limit: 50%)&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Percent
-|-
-| colspan="2" | Sets the output noise level in percent. (0 - 50)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LOCKMODE'''
-|-
-| colspan="2" | Sets the synchronising mode to; 0 = MASTER, 1 = SLAVE, 2 = INDEP.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Mode
-|-
-| colspan="2" | Sets the synchronising mode (0 = MASTER, 1 = SLAVE, 2 = INDEP).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADDRESSRet'''
-|-
-| colspan="2" | Returns the instruments address&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODPMSRC'''
-|-
-| colspan="2" | Sets PM waveform source to; 0 INT, 1 = EXT.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Source
-|-
-| colspan="2" | Sets PM waveform source (0 = INT, 1 = EXT).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MODPWMSRC'''
-|-
-| colspan="2" | Sets PWM waveform source to; 0 = INT, 1 = EXT.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Source
-|-
-| colspan="2" | Sets PWM waveform source (0 = INT, 1 = EXT).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MOD'''
-|-
-| colspan="2" | Sets modulation to; 0 = OFF, 1 = AM, 2 = FM, 3 = PM, 4 = FSK, 5 = PWM.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Modulation
-|-
-| colspan="2" | Sets modulation (0 = OFF, 1 = AM, 2 = FM, 3 = PM, 4 = FSK, 5 = PWM).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ISTRet'''
-|-
-| colspan="2" | Returns IST local message as defined by IEEE Std. 488.2. The syntax of the response is 0<rmt>, if the local message is false, or 1<rmt>, if the local message is true.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LRNRet'''
-|-
-| colspan="2" | Returns the complete setup of the instrument as a binary data block&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OPCRet'''
-|-
-| colspan="2" | Query Operation Complete status. The response is always 1<rmt> and will be available immediately the command is executed because all commands are sequential.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SWPTYPE'''
-|-
-| colspan="2" | Sets the sweep type to; 0 = LINUP, 1 = LINDN, 2 = LINUPDN, 3 = LINDNUP, 4 = LOGUP, 5 = LOGDN, 6 = LOGUPDN, 7 = LOGDNUP.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Type
-|-
-| colspan="2" | Set the sweep type (0 = LINUP, 1 = LINDN, 2 = LINUPDN, 3 = LINDNUP, 4 = LOGUP, 5 = LOGDN, 6 = LOGUPDN, 7 = LOGDNUP).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PULSRANGE'''
-|-
-| colspan="2" | Sets PWM waveform source to <1>, <2> or <3>; 1 = 1, 2 = 2, 3 = 3.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Range
-|-
-| colspan="2" | Sets the pulse rise and fall range. (1, 2 or 3)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TSTRet'''
-|-
-| colspan="2" | The generator has no self test capability and the response is always 0 <rmt>.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''BSTTRGPOL'''
-|-
-| colspan="2" | Sets the burst trigger slope to; 0 = POS, 1 = NEG.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Slope
-|-
-| colspan="2" | Set the burst trigger slope (0 = POS, 1 = NEG).&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ARB3Ret'''
-|-
-| colspan="2" | Returns the binary-data from an existing abbitrary wavefrom memory location.&nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''BSTPHASE'''
-|-
-| colspan="2" | Sets the burst phase to <nrf> degrees. (Lower limit: -360 - Upper limit: 360)&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Degrees
-|-
-| colspan="2" | Sets the burst phase in degrees (-360 - 360)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IDNRet'''
-|-
-| colspan="2" | Returns the instrument identification. The IDN is saved to the variable passed from the function 'ReturnIDN'. The return parameter is TRUE when the IDN is successfully returned.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" | ReturnIDN
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SWPTRGPER'''
-|-
-| colspan="2" | Sets the sweep trigger period to <nrf> seconds&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Seconds
-|-
-| colspan="2" | Set the sweep trigger period in seconds.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PULSDLY'''
-|-
-| colspan="2" | Sets the waveform delay to <nrf> sec&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:]] -
-| width="90%" | Sec
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Opens the COM port ready for communications.&nbsp;
 |-
 |-
@@ Line 875: / Line 241: @@
 | width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-prop-icon.png]]
 | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Properties'''
+|-
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | HTML Source
 |-
 |-
@@ Line 921: / Line 291: @@
 |-
 | colspan="2" | Embedded HTML code used for page 4&nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Connections
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
+| width="90%" | Channel
+|-
+| colspan="2" | SPI Channel selector&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
+| width="90%" | Prescale
+|-
+| colspan="2" | Prescale option selector&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
+| width="90%" | MOSI
+|-
+| colspan="2" | SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
+| width="90%" | MISO
+|-
+| colspan="2" | SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
+| width="90%" | CLK
+|-
+| colspan="2" | SPI Clock Pin CLK - The Clock signal is driven by the SPI master.&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
+| width="90%" | CS / SS
+|-
+| colspan="2" | Chip Select / Slave Select Pin  Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device. &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
+| width="90%" | Int Pin
+|-
+| colspan="2" | Interrupt pin connection on Wiznet module&nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Gateway IP
+|-
 |-
 | width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
@@ Line 941: / Line 354: @@
 |-
 | colspan="2" | IP address of the gateway to the internet if applicable.&nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Subnet Mask
+|-
 |-
 | width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
@@ Line 961: / Line 378: @@
 |-
 | colspan="2" | Subnet mask of the server - usually 255.255.255.0&nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | IP Address
+|-
 |-
 | width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
@@ Line 981: / Line 402: @@
 |-
 | colspan="2" | IP address of the server - usually 192.168.0.x or 192.168.1.x&nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | MAC Address
+|-
 |-
 | width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
@@ Line 1,011: / Line 436: @@
 |-
 | colspan="2" | MAC address of the server&nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Substitutions
+|-
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Outgoing
+|-
 |-
 | width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
@@ Line 1,031: / Line 464: @@
 |-
 | colspan="2" | Number of bytes to reserve for data string.&nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Incoming
+|-
 |-
 | width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
@@ Line 1,042: / Line 479: @@
 | colspan="2" | Number of bytes to reserve for data string.&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" | Scope Traces
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Simulation
 |-
-| colspan="2" | Selects if the scope traces are automatically generated or not&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
+| width="10%" align="center" | [[File:Fc9-type-10-icon.png]]
-| width="90%" | Console Data
+| width="90%" | Label
 |-
-| colspan="2" | Selects if the console data is automatically generated or not&nbsp;
+| colspan="2" | Label used to help identify the component on the panel.&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | API
+| width="90%" | Sim Type
+|-
+| colspan="2" | Decides how to perform the simulation of the component. TCP IP - Communicates using the Windows TCP IP communications DLL SPI / Injector - Communicates using the CAL SPI to allow the communications to be analysed and debugged.&nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | TCP Simulation
 |-
-| colspan="2" | &nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
@@ Line 1,061: / Line 501: @@
 |-
 | colspan="2" | List of network interfaces connected to the PC.  Sets which interface we are communicating via.&nbsp;
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Connections'''
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Channel
-|-
-| colspan="2" | SPI Channel selector&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Prescale
-|-
-| colspan="2" | Prescale option selector&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | MOSI
-|-
-| colspan="2" | SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | MISO
-|-
-| colspan="2" | SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | CLK
-|-
-| colspan="2" | SPI Clock Pin CLK - The Clock signal is driven by the SPI master.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | CS / SS
-|-
-| colspan="2" | Chip Select / Slave Select Pin  Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device. &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | Int Pin
-|-
-| colspan="2" | Interrupt pin connection on Wiznet module&nbsp;
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Simulations'''
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-10-icon.png]]
-| width="90%" | Label
-|-
-| colspan="2" | Label used to help identify the component on the panel.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Sim Type
-|-
-| colspan="2" | Decides how to perform the simulation of the component. TCP IP - Communicates using the Windows TCP IP communications DLL SPI / Injector - Communicates using the CAL SPI to allow the communications to be analysed and debugged.&nbsp;
 |}