Component: MIAC (dsPIC) (MIAC (dsPIC)) (MIAC Module)

Author	Matrix TSL
Version	1.2
Category	MIAC Module

MIAC (dsPIC) component

MIAC - Matrix Industrial Automotive Controller (dsPIC)

Component Pack

FREE

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Downloadable macro reference

	RelayOFF
Turns off the requested relay given by parameter RelayID, values 1 to 4
- BYTE	RelayID
The relay to turn off. From 1 to 4.
- VOID	Return

	InputANALOG_10Bit
- BYTE	InputID
The input to read. From 1 to 8.
- INT	Return

	PrintString
Prints the given character string to the display at the current cursor position and moves the cursor position.
- STRING	Str
The string to send to the display.
- VOID	Return

	GetKeypad
Returns the key code of the key that is pressed, otherwise if nothing is pressed then returns 255
- BYTE	Return

	DisplayStart
Initialise the display ready for use
- VOID	Return

	PrintNumber
Prints the given number to the display starting at the current cursor position and moves the cursor position.
- INT	n
- VOID	Return

	PrintASCII
Prints the given character to the display at the current cursor position and increments the cursor position.
- BYTE	Char
ASCII code of the character to print.
- VOID	Return

	DrawLine
Draws or clears a line from start at sx:sy to end at ex:ey
- BYTE	sx
Start column position
- BYTE	sy
Start row position
- BYTE	ex
End column position
- BYTE	ey
End row position
- BYTE	state
1=active pixel, 0=cleared pixel
- VOID	Return

	PrintFormattedNumber
Will allow you to print a number up to 32-bits with signed or unsigned formatting. Signed = -2147483648 to 2147483647 Unsigned = 0 to 4294967295
- ULONG	Number
Enter the number or variable to print to the LCD
- BOOL	Format
0=Signed, 1=Unsigned
- VOID	Return

	DrawRect
Draws a rectangular box from x1,y1 to x2,y2
- BYTE	x1
- BYTE	y1
- BYTE	x2
- BYTE	y2
- BYTE	state
1=draw pixel, 0=clear pixel
- VOID	Return

	DisplayClear
Clears the display to white space
- VOID	Return

	RelayON
Turns on the requested relay given by parameter RelayID, values 1 to 4
- BYTE	RelayID
The relay to turn on from 1 to 4.
- VOID	Return

	OutputOFF
Outputs a digital low state on the output requested by parameter TransID (Outputs 1 to 4)
- BYTE	TransID
1 to 4 (Outputs A to D)
- VOID	Return

	DrawPixel
Draws, or clears, a pixel at point x,y
- BYTE	px
- BYTE	py
- BYTE	state
state = 0 clears the pixel, else draws the pixel
- VOID	Return

	DisplayCursor
Moves the display cursor to the given position. If the cursor is set to the origin at x=0, y=0, then the next character sent to the display will appear in the top left corner.
- BYTE	x
Position of the cursor in characters from left to right.
- BYTE	y
The line to move the cursor to.
- VOID	Return

	OutputON
Outputs a digital high state on the output requested by parameter TransID (Outputs 1 to 4)
- BYTE	TransID
1 to 4 (Outputs A to D)
- VOID	Return

	InputDIGITAL
Returns the digital state of the input requested by parameter InputID (Inputs 1 to 8)
- BYTE	InputID
The input number from 1 to 8.
- BYTE	Return

	DisplayLight
Turns the display backlight on or off
- BYTE	state
- VOID	Return

	DrawGlyph
Draws a character glyph on the display at position px, py
- BYTE	glyph
The glyph ident number
- BYTE	px
pixel column relative to the drawing origin (top left)
- BYTE	py
pixel row relative to the drawing origin (top left)
- BYTE	mode
0=opaque/cleared background, 1=transparent background
- VOID	Return

	InputANALOG
Returns the 8 bit value for the analogue input requested by parameter InputID (Inputs 1 to 8)
- BYTE	InputID
The input to read from 1 to 8.
- BYTE	Return

Property reference

	Properties
	Connections
	Simulations