Component: Rectifier (DSP)

Author	Matrix Ltd
Version	1.2
Category	DSP

Rectifier component

Converts the negative elements of a signal into a mirrored positive signal.

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Downloadable macro reference

	ControlRectifier
Enables or disables the rectifier, enabled by default
[[File:]] -	State
0=Disable, 1=Enable
- VOID	Return

	Rectify
Collects a single value from the input buffer and outputs a rectified version of the value.
- VOID	Return

	RectifyArray
Passes an entire buffer through the rectifier and outputs a rectified version of the buffer at the other end
- VOID	Return

	ChangePID
Allows the P, I and D control parameters to be changed on the fly during a program.
[[File:]] -	P
[[File:]] -	I
[[File:]] -	D
- VOID	Return

	ResetRecords
Allows the peak and trough to be reset back to default values.
[[File:]] -	ResetPeak
[[File:]] -	ResetTrough
- VOID	Return

	ReceiveString
Gets a string from the receive buffer
- UINT	MaxChars
- UINT	Timeout
Time in milliseconds to wait for data
- STRING	Return

	Initialise
Initialises the UART component pins ready to send and receive data
- VOID	Return

	ReceiveString
Receives a string of bytes and returns the number of bytes received.
- STRING	StringData
- UINT	NumBytes
Maximum number of bytes to try and receive
- UINT	Timeout
Max amount of time in ms to wait between bytes
- BYTE	Return

	Start
Startup routine required by the hardware device. Automatically clears the display after initialising.
- VOID	Return

	SetLEDState
Sets the state of a single LED
- BYTE	Port
0 = PortA, 1 = PortB
- BYTE	LED
0 = LED0, 7 = LED7
- BYTE	State
- VOID	Return

	GetRxIdent
Gets the Rx ID as a Integer Standard and Extended IDs.
- BYTE	Buffer
- ULONG	Return

	Initialise
Must be called before any other CAN component macros to enable and initialise the CAN peripheral.
- VOID	Return

Property reference

	Properties
	Connect To
DSP component with output buffer to collect our data from.
	Buffer Size
Number of individual elements the buffer can store, default 1.
	Buffer Type
Sets the buffer data type.
	Rectifier Threshold
Value at which to choose to flip the signal. Default 0 for a signed buffer.
	Connections
	Simulations