Component: Touch Screen (FT6X06) (Force)
From Flowcode Help
Jump to navigationJump to search
| Author | Matrix Ltd |
| Version | 2.0 |
| Category | Force |
Contents
Touch Screen (FT6X06) component
Low level routines for controlling or interacting with the FT6X06 touch screen controller IC found on a lot of common low cost resistive touch screen products.
Detailed description
No detailed description exists yet for this component
Examples
Downloadable macro reference
|
SampleSensor |
| Reads the touch controller and returns true if there is currently a touch in progress. The touch coordinates can be read using the ReadCoord macro. Return 0 = No Touch, 1 = Single touch detected, 2 = Two touch points detected | |
 - BYTE
|
Return |
|
|
ReadCoord |
| Reads a coordinate returned from the Sample Sensor macro. Coordinate is scaled to the X/Y Pixel bounds specified. | |
| - BYTE
|
Coordinate |
| 0 = X, 1 = Y, 2 = Pressure | |
| - BYTE
|
Index |
| Touch Index Range: 0 - 1 | |
 - UINT
|
Return |
|
|
Initialise |
| Activates the SPI peripheral and claims control over the I/O pins. | |
 - VOID
|
Return |
Property reference
|
Properties |
|
Channel |
| Channel selection | |
|
|
Baud Select |
| Baud rate option selector | |
|
Baud Rate |
| Baud rate to be used | |
|
Stop Delay |
| On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not a 10ms delay between an I2C stop event and the next I2C start event. Most modern microcontrollers will not have a problem so this property can be disabled to speed up the I2C communications. | |
|
|
Analogue Mode |
|
X Pixel |
|
|
Y Pixel |
|
|
Flip X |
|
|
Flip Y |
|
Connections |
|
SDA |
| Pin used for SDA (data signal) | |
|
|
SCL |
| Pin used for SCL (clock signal) | |
|
|
Simulations |
|
Label |
| Label used to identify the component on the panel. | |
|
|
Scope Traces |
| Selects if the component pin connections are automatically generated on the data recorder window or not. Yes: Automatically add the component pins to a group on the data recorder which will reflect the sim data during simultion. No: Do not show the pin signals on the data recorder window. | |
|
|
Console Data |
| Selects if the console data is automatically generated or not | |
|
|
API |
| Specifies the API component on the panel to interact with to provide comms simulation. | |
