Component: Switch (Push, PCB) ()
From Flowcode Help
Jump to navigationJump to search
| Author | Matrix Ltd |
| Version | 1.1 |
| Category |
Contents
Switch (Push, PCB) component
Simple tactile PCB switch for PCB mounting. Approx. 12 * 12mm. Color and operation can be set from properties.
Component Pack
BASICIO
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Downloadable macro reference
Property reference
|
Properties |
|
Connections |
|
Connection |
| The chip pin to which the switch connects. | |
|
Polarity |
| Set the polarity of states sent to the chip pin. 'Active High' -> Pressed = On, Released = Off 'Active Low' -> Pressed = Off, Released = On | |
|
Debounce (ms) |
| Sets the time in milliseconds to allow a pin change to settle into a stable state. NB) Debouncing is only used when reading the button state using the component macros. Chip pins are NOT debounced. | |
|
|
Simulations |
|
|
Operation |
| Latching = Mouse click to turn on, click again to trun off. Momentary = Click to turn on, release to turn off. | |
|
Color |
| Color of the key cap | |
