GPS and RS232 in Flowcode 4

Tuhina Deep · Post by **Tuhina Deep** » Fri Sep 14, 2012 12:02 pm

Hi all......

I am using Flowcode 4 for PIC micros. I am not getting how to use GPS in it. Please Give me an example of flowcode using GPS showing Date and Time.

Also i facing problem in RS232.I have the same flowcode which is shown in video example, Active Component 3 on this site, but it is not working well.I am not able to write letters in queue.Any dailouge box is not opened while clicking on this.Please help me out by giving an example.

Thanks in advance

Tuhina Deep

Enamul · Post by **Enamul** » Fri Sep 14, 2012 12:21 pm

Hi Tuhina,
Here is the two example of GPS program in FCv4..
One for position and other for date and time..

Enamul · Post by **Enamul** » Fri Sep 14, 2012 12:25 pm

Hi,
For RS232 have you tried the following two example of string transmit and receive..this is a good point to start from..

Tuhina Deep · Post by **Tuhina Deep** » Mon Sep 17, 2012 6:48 am

Thanks Enamul ,

I have tried the RS232 examples given by you,but i am not able to do the same as in training example active component 3.
And the GPS time and date example shows wrong time and date. why so? Again the example GPS position shows error <SimMacroCall2>...Please tell me how to solve these problems.

Tuhina

Enamul · Post by **Enamul** » Mon Sep 17, 2012 9:51 am

Hi Tuhina,
Can you post the example flowcode file so that I can see what's going wrong? GPS time and date should be right..which GPS module you are using? I forgot that just couple of days earlier we noticed an issue..
http://www.matrixmultimedia.com/mmforum ... =2&t=11229
Same as you are saying..I will PM BEN & Jonny today..he might have missed that.

Matrix user forums

GPS and RS232 in Flowcode 4

GPS and RS232 in Flowcode 4

Re: GPS and RS232 in Flowcode 4

Re: GPS and RS232 in Flowcode 4

Re: GPS and RS232 in Flowcode 4

Re: GPS and RS232 in Flowcode 4