Still playing with the EBM001 module. After Bens help I now know how to set the background colour (I wasn't clearing the display. However, it does not seem to completely fill the screen (in the simulation). Is this a known issue or am I doing something wrong?
File attached
Pete
gLCD question
Moderator: Benj
-
peterhalloway
- Posts: 30
- Joined: Sat Dec 29, 2012 4:49 pm
- Has thanked: 9 times
- Been thanked: 5 times
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: gLCD question
Hi Pete,
This looks to be a bug in the simulation regarding the display orientation. The actual hardware should work fine.
I'll look into the bug and see if we can get it fixed.
This looks to be a bug in the simulation regarding the display orientation. The actual hardware should work fine.
I'll look into the bug and see if we can get it fixed.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: gLCD question
Ok the simulation should now be fixed with this latest component.
The file needs to be placed here "C:\Program Files (x86)\Flowcode 6\components" before starting Flowcode.
The file needs to be placed here "C:\Program Files (x86)\Flowcode 6\components" before starting Flowcode.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel