The 13.V powersupply needed for some e-blocks,
is it AC or DC?
I bought an e-blocks starter kit in the Netherlands
via Elektor. But there was no powersupply with it.
So I am thinking to by a 13.5V powersupply
somewhere in a shop in the Netherlands.
That would be quicker than buying it in the UK.
And also I am a little bit afraid to use my
credit card on the internet.
13.5V powersupply - AC or DC?
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Hello
You should be able to use any DC power supply between 12V and 14V. The supplies should be available from your local electronics retailer or supermarket. Also using your card online is ok as long as you trust the company you are dealing with and there are lock symbols in the address bar and at the bottom of the page.
You should be able to use any DC power supply between 12V and 14V. The supplies should be available from your local electronics retailer or supermarket. Also using your card online is ok as long as you trust the company you are dealing with and there are lock symbols in the address bar and at the bottom of the page.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel