Page 1 of 1
Miac Extended can communication (29 bit adress)
Posted: Sun Oct 13, 2013 12:21 pm
by Nazaire VERRUE
Dear,
I have made an extended can communication with two miac modules.
See attachment: Oefening22a.fcfx (send the can communication) and Oefening22b.fcfx (receive the can communication)
With an adress = 10 work the can communication perfect.
With an adress = 217056256 work the send can comminication perfect (Oefening22a.fcfx) but the receive can communication will not work (Oefening22b.fcfx).
What is here wrong?
Best regards
Nazaire Verrue
Re: Miac Extended can communication (29 bit adress)
Posted: Mon Oct 14, 2013 3:02 pm
by LeighM
Hello,
Yes, it’s a bug in the CAN component, now fixed and attached (will also be in the next patch release)
Leigh
Re: Miac Extended can communication (29 bit adress)
Posted: Mon Oct 14, 2013 5:57 pm
by Nazaire VERRUE
Dear Leigh
The file CAN.fcpx will not work.
I have downloaded the CAN.fcpx and this replace in the software but the CAN component will not add to the dashbord panel.
What is here wrong?
Best regards
Nazaire Verrue
Re: Miac Extended can communication (29 bit adress)
Posted: Tue Oct 15, 2013 10:47 am
by LeighM
That could be a licensing issue. Do you have the Professional version?
Re: Miac Extended can communication (29 bit adress)
Posted: Tue Oct 15, 2013 11:17 am
by Nazaire VERRUE
Dear Leigh
I have the Professional version of flowcode 6
Best regards
Nazaire Verrue
Re: Miac Extended can communication (29 bit adress)
Posted: Tue Oct 15, 2013 12:25 pm
by JonnyW
Hello.
There was a change in file format to support multi-arrays in 6.0.2. It is possible that this is causing the issue if you are running a pre-6.0.2 version. If you make sure you are on at least 6.0.2 then this should help. The latest is 6.0.3.
You can upgrade via your account or through Help->Check for Upgrades in Flowcode.
Jonny
Re: Miac Extended can communication (29 bit adress)
Posted: Tue Oct 15, 2013 4:06 pm
by Nazaire VERRUE
Thank you Jonny and Leigh
Now it work perfect.
Best regards
Nazaire