As RX interrupt does not currently simulate, my suggestion is allow the interrupt to be assigned with a Key e.g F12 or enter.
As soon as key is pressed then interrupt macro is accessed.
Is that a possibility please?
Very Basic RX interrupt Simulation suggestion
Moderator: Benj
-
medelec35
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
-
medelec35
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
Re: Very Basic RX interrupt Simulation suggestion
Hi Leigh,
Yes That's why I would like it assigned to a key so on each key press The interrupt is accessed i.e Human interface queue goes down by one.
Assuming a R232 read component macro is added of course.
Unless you was referring to something different?
Thanks.LeighM wrote:Good idea (maybe we could even link this to the console).
Yes That's why I would like it assigned to a key so on each key press The interrupt is accessed i.e Human interface queue goes down by one.
Assuming a R232 read component macro is added of course.
Unless you was referring to something different?
Martin