Matrix user forums

Hello
I would like to know if you like me to draw my characters display non-existent.

thank you

Hello

The recorder is working PICkit2 normal.
Least in this sample program that I created it can not write and direct this error appears as shown in the image. I wonder what's going on thanks.

Hello

I tried to configure as I tried but could not explain all forms so far not got any pictures of how success follows'm configuring hope you can help me

hello
then installed the version 4 when he asked which writer would like to use or PICkit2 eblook and I chose the PICkit2 and functioned normally in question would not release it to know what should I do?

Hello

How do I configure gravadr PICkit2 directly to program my board as it did in version 4.5

thank you More where this command help explaining the non-spotted char $ pos toString found the others if you can help me. Only one question when I create cont = byte cont2 = byte number string and do the command as string = "0,1,2,3" count = count + 1 cont2 = char (number, count) and try ...

Hello
What good command char$?

Thanks for the help

More when I record this example the program together account led7segment they wanted a program that counts up from 0 to 999 in PORTD

counter in LED7SEG 0-999 could help me.

the program is attached thanks

Hello

How to create a matrix in Flowcode?

I want to create a string c "3,4,5,6,7,8," and every time they show only an increasing number tme that possibility?

Led7seg4 The component has no way of putting it in cathode? As if you can help me?

thank you

Led7seg4 The component has no way of putting it in cathode? As if you can help me?

thank you

Hello
I'm in trouble for the 7-segment display it is working perfectly, I have a hardware with four 7-segment display on the door, I put them in the door when I test the second bit in my hardware it shows the port 3 bit.
And when I put in 4 bit port does not appear.

Any tips.

thank you

Hello,

I managed to solve my problem. I am sending the code if someone has solved the same doubts I had.

Hello,

I managed to solve my problem. I am sending the code if someone has solved the same doubts I had.

Hello,

I would like to know how to work on my communication RS232 hardware post was not successful at the time of transmission and reception. If you can help me I appreciate it.

Hello

When sending the number 90 does not return anything if I keep pressing several times in this way is like a help to know if the Flowcode works with serial communication or it only works in the simulation?

thank you

using SerialPort not work what is the problem?

It set up the crystal, where I am making a mistake.

Hello Martin

Maybe you can help me, I'm doing a cominicação via RS232 only when I record on my hardware it does wrong transmission wonder what would be the problem?

Ah I see. What I suggested is correct for simulation, But for the hardware side, go back to Ext properties. and change Char receive type from Int to byte. Then you should receive correct characters Probably what I would do is when type a message, I would fill LCD from left to right, then when get t...

Hello Martin I changed how he had explained to me and left the way it was, just that when I use my USART terminal continues giving error I send and receive 80 to 809 command again when I get 809 980 and is thus like to know what's happening and the error in my program that is configured crsital this...

Hello
The problem is the time to emulate the hardware when I send a post by my hyperterminal value it returns another ex: 890 and sent me back 80 or 980.

It's all right configurate the time the crystal?

and I doubt this is because this type of error?

Hello
I would like to help in an RS232 communication
I use Windows 7. hyperterminal use a separate program.

I can not send and receive the same information.

thank you