Flash Memory

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

Post Reply
leoo
Flowcode V4 User
Posts: 55
Joined: Mon Jan 19, 2009 11:43 am
Has thanked: 41 times
Been thanked: 9 times

Flash Memory

Post by leoo »

Hi,

I'm busy with a project in which I need an MCU with more than 2 UARTs. I also need to be able to store about 40 bytes in some kind of NV memory. I decided on the PIC24FJ128GA202 as it is supported by FC7 and the EB064, and has 4 UARTs. Unfortunately this chip does not have any on-board EEPROM and I do not have the development platform for any of the chips that do conform to the parameters above.

I would like to avoid using external memory if possible. Is it possible to implement something in a component macro that will store data in the chip's flash memory?

Kind regards.
Leo
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: Flash Memory

Post by Benj »

Hello Leo,

Have you seen this Flowcode 6/7 component from Kersing, it may do just what you are looking for with your current device.

viewtopic.php?f=58&t=15932
Top
Post Reply

Return to “Flowcode V7”