View source for Component: Temperature (DS18B20) (Environmental)

{| style="width:50%"
|-
| width="20%" style="color:gray;" | Author
| MatrixTSL
|-
| width="20%" style="color:gray;" | Version
| 1.0
|-
| width="20%" style="color:gray;" | Category
| Environmental
|}


==Temperature (DS18B20) component==
A rugged temperature sensor allowing one or more sensors to be addressed and read. Capable of reading temperatures from -55 to +125 degrees C. Requires a One Wire component to perform the bus operations.

==Detailed description==



''No detailed description exists yet for this component''

==Examples==





This example shows how to connect the DS18B20 component to the OneWire component and either select a specific device on the bus or scan through the devices on the bus collecting the temperature readings.

The temperature and serial number is output using a UART connection as is onboard a Arduino or ESP32 device.

{{fcfile|Example_DS18B20.fcfx|Example DS18B20}}

==Downloadable macro reference==

{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SampleAllDevices'''
|-
| colspan="2" | Performs a temperature conversion on all compatible devices. The temperature can be read using the ReadTemperature macro. Brefore calling ReadTemperature you need to use one of the Address macros.&nbsp;
|-
|-
| width="10%" align="center" | [[File:]] - 
| width="90%" | WaitForCompletion
|-
| colspan="2" | 0=Dont Wait, 1=Block and Wait To Complete&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''AddressSpecificDevice'''
|-
| colspan="2" | Starts a temperature conversion on a specific device using a hex string identifier. SerialNumber parameter should be 12 characters and contain the 48-bit Serial.&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
| width="90%" | SerialNumber
|-
| colspan="2" | 48-bit Serial Number e.g. "32DF4A3C1901"&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSerialString'''
|-
| colspan="2" | Gets the Serial String for the current addressed device.&nbsp;
|-
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''AddressNextDevice'''
|-
| colspan="2" | Scans for the next connected device with a matching family code. Goes through the device list generated by the ScanBus macro.&nbsp;
|-
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetTemperature'''
|-
| colspan="2" | Reads the temperature from the last sample on the selected device. The selected device is set using the AddressNext or AddressSpecific macros.&nbsp;
|-
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] - 
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SampleAddressedDevice'''
|-
| colspan="2" | Performs a temperature conversion on the current addressed device. Requires one of the Address component macros to be called. The temperature can be read using the ReadTemperature macro.&nbsp;
|-
|-
| width="10%" align="center" | [[File:]] - 
| width="90%" | WaitForCompletion
|-
| colspan="2" | 0=Dont Wait, 1=Block and Wait To Complete&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
|-
| colspan="2" | Configures each matching sensor on the bus with the specified conversion bits.&nbsp;
|-
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''WriteRegister'''
|-
| colspan="2" | A simple example showing a generic way to write a register using I2C.&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Address
|-
| colspan="2" | &nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Data
|-
| colspan="2" | &nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
|-
| colspan="2" | &nbsp;
|-
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] - 
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
|-
| colspan="2" | Sets up up the communication bus and initialises the accelerometer module.  Returns 0 for success and > 0 for fail.&nbsp;
|-
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IOSetOutputPin'''
|-
| colspan="2" | Sets the selected digital pin to an output and assigns the output state.&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Pin
|-
| colspan="2" | Range: 0-29&nbsp;
|-
| width="10%" align="center" | [[File:]] - 
| width="90%" | State
|-
| colspan="2" | Range: 0-1&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTReceive'''
|-
| colspan="2" | Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available.&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Channel
|-
| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleAverage10'''
|-
| colspan="2" | Reads the voltage present on an Analog pin as an 10-bit value range 0-1023. Performs the selected number of samples with the selected time in microseconds in between samples&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | ADCChannel
|-
| colspan="2" | Range: 0, 3-7&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | SampleCount
|-
| colspan="2" | Range: 1- 100&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | SampleDelay
|-
| colspan="2" | Delay in us between each sample&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireScanBus'''
|-
| colspan="2" | Scans the one wire bus to detect all connected devices. Returns the number of one wire devices found.&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Channel
|-
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPIInitialise'''
|-
| colspan="2" | Initialsie the SPI module ready for communications&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Channel
|-
| colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireReceiveByte'''
|-
| colspan="2" | Receives a byte from the one wire bus a bit at a time&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Channel
|-
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CSend'''
|-
| colspan="2" | Transmit a byte using the I2C bus&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Channel
|-
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | DataOut
|-
| colspan="2" | &nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] - 
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTSend'''
|-
| colspan="2" | Send a byte via the UART module&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Channel
|-
| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Data
|-
| colspan="2" | Data Byte to send. Range: 0-255&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireGetDeviceCount'''
|-
| colspan="2" | Returns the number of devices found by the last ScanBus operation.&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Channel
|-
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMSetPrescaler'''
|-
| colspan="2" | Sets the prescaler for the PWM output&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Channel
|-
| colspan="2" | Range: 0 - 11&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Prescaler
|-
| colspan="2" | &nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Period
|-
| colspan="2" | &nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMEnable'''
|-
| colspan="2" | Enable a PWM output&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | Channel
|-
| colspan="2" | Range: 0-11&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleArray10'''
|-
| colspan="2" | Reads the voltage present on an Analog pin as an 10-bit value range 0-1023 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | ADCChannel
|-
| colspan="2" | Range: 0, 3-7&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | SampleCount
|-
| colspan="2" | Range: 1- 32&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
| width="90%" | SampleDelay
|-
| colspan="2" | Delay in us between each sample&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
| width="90%" | Samples
|-
| colspan="2" | 10-bit samples returned from the function&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleAverage8'''
|-
| colspan="2" | Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | ADCChannel
|-
| colspan="2" | Range: 0, 3-7&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | SampleCount
|-
| colspan="2" | Range: 1- 100&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | SampleDelay
|-
| colspan="2" | Delay in us between each sample&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
|-
| colspan="2" | Initialise the comms to the Arduino board ready for commands to be sent.&nbsp;
|-
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMEnable'''
|-
| colspan="2" | Allows pulse width modulated transistor outputs to be switched on or off. Bit 0 = Enable AB Bit 1 = A / Bit 2 = B Bit 3 = C / Bit 4 = D Bit 5 = Enable CD&nbsp;
|-
|-
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
| width="90%" | EnableMask
|-
| colspan="2" | Range 0-63 or 0b00000 to 0b111111&nbsp;
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}


{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
|-
| colspan="2" | &nbsp;
|-
|-
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
| width="90%" style="border-top: 2px solid #000;" | ''Return''
|}




==Property reference==

{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
|-
| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-prop-icon.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Properties''' 
|-
|-
| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
| width="90%" | One Wire Component
|-
| colspan="2" | Link to the one wire component to host the bus.&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
| width="90%" | Alarm High
|-
| colspan="2" | The high byte of the alarm range&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
| width="90%" | Alarm Low
|-
| colspan="2" | The Low byte of the Alarm range&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
| width="90%" | Conversion Bits
|-
| colspan="2" | The number of bits used to perform a temperature sample. Controls the conversion time and the resolution.&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
| width="90%" | Max Conversion Time
|-
| colspan="2" | The maximum amount of time in milliseconds it will take for a sample to complete.&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-type-15-icon.png]]
| width="90%" | Temperature Resolution
|-
| colspan="2" | The maximum resolution steps that the temperature can be read in.&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
| width="90%" | Number Sensors
|-
| colspan="2" | Sens the number of sensors we can communicate with during simulation&nbsp;
|-
| width="10%" align="center" | [[File:Fc9-type-10-icon.png]]
| width="90%" | Serial 0
|-
| colspan="2" | Serial number for simulated one wire device&nbsp;
|-
| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-conn-icon.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Connections''' 
|-
|-
| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-conn-icon.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Simulations''' 
|-
|-
| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
| width="90%" | Simulate Comms
|-
| colspan="2" | No - We use the panel GUI to perform the simulation. Yes - We use OneWire comms via an API to communicate with real hardware.&nbsp;
|}