Difference between revisions of "Component: Linear Actuator (Mechatronics)"
From Flowcode Help
Jump to navigationJump to search| Line 20: | Line 20: | ||
==Detailed description== | ==Detailed description== | ||
| + | |||
| + | |||
| Line 34: | Line 36: | ||
==Examples== | ==Examples== | ||
| + | |||
| + | |||
Revision as of 14:42, 16 January 2023
| Author | Matrix TSL |
| Version | 1.0 |
| Category | Mechatronics |
Contents
Linear Actuator component
Creates a linear actuator that can be used with the various motor components via a coupling or gearbox.
Component Source Code
Please click here for the component source code: FC_Comp_Source_LinearActuator.fcfx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Downloadable macro reference
|
Rotate |
| Simulation Rotate function to allow accurate rotation during simulation. Automatically called by any attached coupling or gearbox component. | |
 - FLOAT
|
Angle |
| Amount to rotate the shaft input in degrees | |
 - VOID
|
Return |
|
|
CheckLimits |
| Checks to see if either limit switch is active. Returns 1 if min switch is active, 2 if max switch is active, 3 if both switches are active else returns 0. | |
 - BYTE
|
Return |
Property reference
|
Properties |
|
Actuator Properties |
|
Translation Per Rev |
| Sets the amount of translation for each revolution of the input shaft. M4 = 0.7mm M5 = 0.8mm M6 = 1.0mm M8 = 1.25mm M10 = 1.5mm | |
|
|
Travel |
| Amount of travel in the linear actuator before hitting the end stops | |
|
|
Revolutions |
| Number of revolutions the actuator can travel | |
|
Colour |
| Sets the colour of the actuator and end stops | |
|
|
Connections |
|
Output |
| Output connection for example an end tool or another linear slide and motor group. | |
|
|
Output Offset X |
| Distance along the X axis from the center of the coupling to the center of the output object. | |
|
|
Output Offset Y |
| Distance along the X axis from the center of the coupling to the center of the output object. | |
|
|
Output Offset Z |
| Distance along the shaft from the center of the coupling to the center of the output object. | |
|
|
Limits |
|
Limit Type |
| Controls if limit switches are available on the linear actuator. | |
|
|
Switch Polarity |
| Sets the active polarity of the input switches. Active low are often used to help reduce noise on the switch inputs. | |
|
Min Switch Pin |
| Pin connection used for the minimum limit switch | |
|
|
Max Switch Pin |
| Pin connection used for the maximum limit switch | |
