Component: LIN Slave (Comms)

Author	Matrix Ltd
Version	1.2
Category	Comms

LIN Slave component

Low level routines for controlling the LIN bus (1.3 / 2.0) slave interface.

Component Source Code

Please click here for the component source code: FC_Comp_Source_LinSlave.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

	PowerDown
Power Down the device
- VOID	Return

	GetState
Returns the state of the device
- BYTE	Return

	ListenForMessages
Listens for messages with Timeout and returns the state
- BYTE	Timeout
- BYTE	ChecksumType
0=Classic, 1=Enhanced
- BYTE	Return

	ReadAddress
Returns the Identifier read
- BYTE	Return

	ReadDataCount
Return the data count size for Message
- BYTE	Message
- BYTE	Return

	ReadData
Returns the message data byte
- BYTE	Message
Message to be read
- BYTE	Index
Index of data byte to be returned
- BYTE	Return

	SetData
Set the Message data to be automatically sent as part of the ListenForMessages macro.
- BYTE	Message
Message to assign data for Range: 1-8
- BYTE	Data1
Data byte value
- BYTE	Data2
Data byte value
- BYTE	Data3
Data byte value
- BYTE	Data4
Data byte value
- BYTE	Data5
Data byte value
- BYTE	Data6
Data byte value
- BYTE	Data7
Data byte value
- BYTE	Data8
Data byte value
- BYTE	Return

	Initialize
Initialises the device
- VOID	Return

	WakeUp
Wake Up the device
- VOID	Return

Property reference

	Properties
	Connections
	TX pin
LIN bus data transmit pin
	RX pin
LIN bus data receive pin
	CS pin
LIN bus chip select pin
	FAULT pin
LIN bus fault detection pin
	VREG pin
LIN bus voltage regulation pin
	MESSAGES
Number of messages the firmware is designed to listen for
	MESSAGE1
	ID
Message identifier to listen for
	BYTES
Number of bytes to expent in the packet
	TX_RX
Data direction for packet
	Simulation
	Label
A text label to aid identifying the component.
	Timing Adjustments
	Timer Adjust TX
	Timer Adjust RX