Component: WLAN Dummy (EB069, WIZ610wi) (Wireless)

Author	Matrix Ltd.
Version	1.3
Category	Wireless

WLAN Dummy (EB069, WIZ610wi) component

Wireless LAN component designed to work with the WIZ610wi module from Wiznet. Provides a very simple interface to allow webpages to be hosted from hardware or simulation. Also available in the form of the EB069 E-block.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_WLAN_Dummy.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_WLAN_Dummy.fcfx

Detailed description

No detailed description exists yet for this component

Examples

This example connects the WLAN module to a existing wireless router and starts a web page server running. The web page can be accessed by typing the IP address of the module into your browser.

Please note that due to limitations with use if RAM storage on some processors you will need to ensure that each line of the page text (HTML) is quite short, usually below 100 characters. Otherwise this can cause an error such as “Error: No remaining RAM block (on target) big enough for:”

Additional examples can be found in the “Apps and Bundles” section of this Wiki:

Internet Application Guide

Wireless LAN Application Guide

The example also hosts a web page server during simulation using your PC. You can access the web pages served by the PC running Flowcode by using the localhost loopback IP address "127.0.0.1:5000" where 5000 is the port assigned to the WLAN component. You can access the web pages from a PC on a network by using the IP address of the machine running Flowcode and specifying the correct port. Port 80 is used by default for HTML transfer but windows can be a bit funny about what is allowed on port 80 so we have used port 5000 in the example. You may have to check your server PC's incoming firewall settings to get this fully functional via a remote PC. WLAN Webpage Server Here is one of the pages generated by the example.

The TCPIP tab of the console window will show all the data sent and received during simulation which is useful for learning how things like web page servers work.

Macro reference

	SendString
Sends the given Text. Appends a CR/LF pair of characters it CrLf is true.
- STRING	Text
- BYTE	CrLf
- VOID	Return

	SendCommand
Sends the given command and returns the reply status. (See GetReply for return values)
- STRING	Command
- BYTE	Return

	EnableCommandMode
Enables command mode. Must be called before commands are issued.
- VOID	Return

	ReceiveIncoming
Returns the received data string
- STRING	Return

	CheckForPageRequests
To be called periodically. Returns non-zero if a request has been processed
- BYTE	Return

	ReadConnectionStatus
Checks the connection status. Returns 0 if not connected, 1 if connected.
- BYTE	Return

	SetOutValue
Set the value of an outbound substitution string
- BYTE	index
- STRING	value
- VOID	Return

	Send_Embedded_HTML_Page4
- VOID	Return

	DisableCommandMode
Exits command mode
- VOID	Return

	Send_Embedded_HTML_Page3
- VOID	Return

	Send_Embedded_HTML_Page2
- VOID	Return

	Send_Embedded_HTML_Page1
- VOID	Return

	GetInValue
Returns the string value of a Request parameter
- BYTE	index
Index of the request paramter, starting at zero.
- STRING	Return

	ConnectToSSID
Attempts to connect to the given SSID and Key values. Returns 0 if successful.
- STRING	SSID
- STRING	Key
- BYTE	Return

	GetReply
Returns the last received response to a command. 0 = OK 1 = FAIL_ERR 2 = STX_ERR 3 = CMD_ERR 4 = PARAM_ERR 5 = ETX_ERR 6 = SERIAL 255 = TOUT
- BYTE	Return

	Initialise
Initialise the device with the property data. Returns 0 if successful
- BYTE	Return

Property reference

Properties