Component: CAN Bus BL0140 (E-blocks 2)

Author
Version	1.0
Category	E-blocks 2

Component Source Code

Please click here to download the component source project: FC_Comp_Source_EBlocks2_CAN_Bus_BL0140_2d.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_EBlocks2_CAN_Bus_BL0140_2d.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

ChangeRate

	ChangeRate
Simple attempt to alter the bus rate of the CAN. External CAN channels only,
- BYTE	Rate
Rate: 0-3 where 0=125, 1=250, 2=500, 3=1000
- VOID	Return

CheckRx

	CheckRx
Checks to see if any messages are available for 'Buffer' specified
- BYTE	Buffer
Send buffer: 0 to 1
- BYTE	Return

GetRxData

	GetRxData
Returns last received message data byte at position Index. Buffer parameter is currently ignored
- BYTE	Buffer
- BYTE	Index
- BYTE	Return

GetRxDataCount

	GetRxDataCount
Returns last received message data length. Buffer parameter is currently ignored
- BYTE	Buffer
- BYTE	Return

GetRxIDHi

	GetRxIDHi
Gets the Hi byte Rx ID in register format. Standard ID only 0-2047. Compatible with v5 component and previous,
- BYTE	Buffer
Receive Buffer. Range 0-1
- BYTE	Return

GetRxIDLo

	GetRxIDLo
Gets the Lo byte Rx ID in register format. Standard ID only 0-2047. Compatible with v5 component and previous,
- BYTE	Buffer
- BYTE	Return

GetRxIDSimple

	GetRxIDSimple
Gets the Rx ID as a Integer Standard ID only 0-2047.
- BYTE	Buffer
Receive Buffer. Range 0-1
- UINT	Return

GetRxIdent

	GetRxIdent
Gets the Rx ID as a Integer Standard and Extended IDs.
- BYTE	Buffer
- ULONG	Return

Initialise

	Initialise
Must be called before any other CAN component macros to enable and initialise the CAN peripheral.
- VOID	Return

ReadSwitches

	ReadSwitches
Returns switch input states from the external MCP2515 device. 0 = No Switch Pressed, 1 = Switch 1 Pressed, 2 = Switch 2 Pressed, 3 = Both Pressed (External CAN only)
- BYTE	Return

SendBuffer

	SendBuffer
Transmits one of the transmit buffers which should have already been populated with an ID and data.
- BYTE	Buffer
Specifies which transmit buffer to send
- VOID	Return

SetRxFilter

	SetRxFilter
Allows the receive ID filter to be configured on the fly allowing different ID ranges to be received.
- BYTE	Filter
Specifies which receive filter to modify. Range: 0-5
- ULONG	ID
The ID filter value you wish to use
- VOID	Return

SetRxFilterID

	SetRxFilterID
sets the Filter Standard mode only (for V5 compatibility only)
- BYTE	Filter
Specifies which filter to modify. Range: 0-5
- BYTE	Hi
ID bits 3-10
- BYTE	Lo
ID bits 0-2 stored in the upper 3 bits of the byte
- VOID	Return

SetRxMask

	SetRxMask
Allows the receive ID mask to be configured on the fly allowing different ID ranges to be received.
- BYTE	Mask
Specifies which receive mask to modify. Range: 0-1
- ULONG	ID
The ID mask value you wish to use
- VOID	Return

SetRxMaskID

	SetRxMaskID
set the Mask Standard ID mode only (for V5 compatibility)
- BYTE	Mask
Specifies which receive mask to modify. Range: 0-1
- BYTE	Hi
ID bits 3-10
- BYTE	Lo
ID bits 0-2 stored in the upper 3 bits of the byte
- VOID	Return

SetTxData

	SetTxData
Assigns one of the outgoing transmit buffers with data ready to be sent.
- BYTE	Buffer
- BYTE	Count
- BYTE	d0
- BYTE	d1
- BYTE	d2
- BYTE	d3
- BYTE	d4
- BYTE	d5
- BYTE	d6
- BYTE	d7
- VOID	Return

SetTxID

	SetTxID
Set the Tx CAN ID in register format. Standard ID only 0-2047. Compatible with v5 component and previous,
- BYTE	Buffer
Transmit buffer to load. Range: 0-2
- BYTE	Hi
ID bits 3-10 e.g. ((ID & 0x7F8) >> 3)
- BYTE	Lo
ID bits 0-2 stored in the upper 3 bits of the byte e.g. ((ID & 0x7) << 5)
- VOID	Return

SetTxIDSimple

	SetTxIDSimple
Set the Tx CAN ID as a generic number. Standard IDs only 0-2047.
- BYTE	Buffer
Transmit buffer to load. Range: 0-2
- UINT	ID
The ID value you wish to use. Range: 0-2047
- VOID	Return

SetTxIdent

	SetTxIdent
Set the Tx CAN ID as a generic number. Standard and extended IDs Standard 0-2047 Extended 2048-536870911
- BYTE	Buffer
Transmit buffer to load. Range: 0-2
- ULONG	ID
The ID or Extended ID value you wish to use. Range: 0-536870911
- VOID	Return

ShowLEDs

	ShowLEDs
Set LED state (External CAN only)
- BYTE	led1
Controls LED 1. Range: 0-1
- BYTE	led2
Controls LED 2. Range: 0-1
- VOID	Return

Property reference

	Properties
	SPI
	External/Internal
Switches between Internal CAN peripheral and External CAN controller IC MCP2515.
	CHANNEL
SPI Channel selector
	Port
	INT
	CS (SS)
Chip Select / Slave Select Pin Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device.
	MOSI
SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.
	MISO
SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.
	CLK
SPI Clock Pin CLK - The Clock signal is driven by the SPI master.
	Prescale
Prescale option selector
	Sample Point
Data bit read sample point
	Config Delay
	TX Buffer 0
	Message ID
TX Buffer 0 Message Identifier
	Length
TX Buffer 0 Number of data bytes
	D0
TX Buffer 0 Data Byte 0
	D1
TX Buffer 0 Data Byte 1
	D2
TX Buffer 0 Data Byte 2
	D3
TX Buffer 0 Data Byte 3
	D4
TX Buffer 0 Data Byte 4
	D5
TX Buffer 0 Data Byte 5
	D6
TX Buffer 0 Data Byte 6
	D7
TX Buffer 0 Data Byte 7
	TX Buffer 1
	Message ID
TX Buffer 1 Message Identifier
	Length
TX Buffer 1 Number of data bytes
	D0
TX Buffer 1 Data Byte 0
	D1
TX Buffer 1 Data Byte 1
	D2
TX Buffer 1 Data Byte 2
	D3
TX Buffer 1 Data Byte 3
	D4
TX Buffer 1 Data Byte 4
	D5
TX Buffer 1 Data Byte 5
	D6
TX Buffer 1 Data Byte 6
	D7
TX Buffer 1 Data Byte 7
	TX Buffer 2
	Message ID
TX Buffer 2 Message Identifier
	Length
TX Buffer 2 Number of data bytes
	D0
TX Buffer 2 Data Byte 0
	D1
TX Buffer 2 Data Byte 1
	D2
TX Buffer 2 Data Byte 2
	D3
TX Buffer 2 Data Byte 3
	D4
TX Buffer 2 Data Byte 4
	D5
TX Buffer 2 Data Byte 5
	D6
TX Buffer 2 Data Byte 6
	D7
TX Buffer 2 Data Byte 7
	RX Buffer 0
	Settings
RX Buffer 0 Message Receive Mode
	RX Buffer 1
	Settings
RX Buffer 1 Message Receive Mode
	Simulate SPI Comms