Component: SysBlocks (E-blocks 2)

Author	Matrix TSL
Version	1.0
Category	E-blocks 2

Component Source Code

Please click here to download the component source project: FC_Comp_Source_SysBlocks.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_SysBlocks.fcfx

Detailed description

Please click here for a [Sysblocks_Getting_Started_Guide|SysBlocks getting started guide].

Examples

No additional examples

Macro reference

Initialise

	Initialise
Initialise components
- VOID	Return

LCDClear

	LCDClear
- VOID	Return

LCDWriteString

	LCDWriteString
- BYTE	X
- BYTE	Y
- STRING	Data
- VOID	Return

ReadEncoderCounter

	ReadEncoderCounter
Reads the current dial counter This is a counter from -32768 to 32767
- BYTE	Channel
Range: 0-1
- INT	Return

ReadSwitch

	ReadSwitch
Samples one of the digital switches
- BYTE	Channel
Range: 0-2
- BOOL	Return

ReadSwitches

	ReadSwitches
Samples all of the digital switches and returns as a three bit value.
- BYTE	Return

ResetEncoderCounter

	ResetEncoderCounter
Resets the encoder dial counter to zero
- BYTE	Channel
Range: 0-1
- VOID	Return

SetDigitalPotWiper

	SetDigitalPotWiper
Sets the value of one of the digital potentiometers.
- BYTE	Channel
Range: 0-5
- UINT	Value
129 Taps Range: 0-128 / 257 Taps Range: 0-256
- VOID	Return

UsbGetByte

	UsbGetByte
Reads the next available byte from the circular buffer, Returns 255 if the buffer is empty.
- UINT	Return

UsbGetNumberBytes

	UsbGetNumberBytes
Returns the number of valid data bytes currently inside the buffer.
- UINT	Return

UsbLookForValue

	UsbLookForValue
Scans the buffer for an array of specific values. Returns 0 if the value is not found. Returns 1 if the value is found.
- STRING	Value
Value to look for, can be a string or byte array,
- BYTE	NumChars
The number of characters you wish to try and match
- BYTE	RemoveContent
0=Leave data alone, 1=Remove data from buffer
- BYTE	ResetFind
0=Continue the find from the last operation, 1=Start again
- BYTE	Return

UsbSendString

	UsbSendString
Sends a string to the USB
- STRING	Data
String to send
- VOID	Return

WriteLED

	WriteLED
Writes to one of the LEDs as a digital output
- BYTE	Channel
Range: 0-2
- BOOL	Value
0=Off, 1=On
- VOID	Return

WriteLEDs

	WriteLEDs
Writes to all of the LEDs as digital outputs
- BYTE	Values
Range: 0 (All Off) - 7 (All On)
- VOID	Return

WriteVU

	WriteVU
Writes to one of the 8-bit VU meters
- BYTE	Channel
0=VU_A, 1=VU_B
- BYTE	Value
Range: 0-255
- VOID	Return

WriteVUBargraph

	WriteVUBargraph
Outputs a bargraph to the VU allowing for level visualiusation.
- BYTE	Channel
0 = VU_A, 1=VU_B
- BYTE	Value
Range: 0 - 8
- VOID	Return

Property reference

Properties