Component: TCP/IP Dummy (ENC28J60) (Comms: Networking)

Author	Matrix TSL
Version	2.0
Category	Comms: Networking

TCP/IP Dummy component

A set of routines used to control a ENC28J60 TCP/IP Module. Required connections VCC, Reset, GND, SCK, MISO, MOSI, CS. Leave these pins disconnected CLKOUT, ENC_WOL, ENC_INT

Component Source Code

Please click here to download the component source project: FC_Comp_Source_TCPIP_ENC28J60_Dummy.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_TCPIP_ENC28J60_Dummy.fcfx

Detailed description

No detailed description exists yet for this component

Examples

Here is a simple example to help get started with the ENC28J60 module.

The example program creates a web page server on the network and will also respond to ping requests.

The HTML to drive the web pages is included in the flowchart near the bottom of the main program loop. ENC28J60 Example

Macro reference

CheckArpPacketIsMyreplyArp

	CheckArpPacketIsMyreplyArp
- BYTE	Return

CheckForARP

	CheckForARP
Checks to see if the received data is an ARP request with my IP address.
- UINT	Length
- BYTE	Return

CheckForIp

	CheckForIp
Checks to see if the received data is an IP request with my IP address.
- UINT	Length
- BYTE	Return

CheckForPing

	CheckForPing
Checks to see if the received data is a Ping request
- BYTE	Return

CheckForTCPPort

	CheckForTCPPort
Checks to see if the received data is requesting the server port
- UINT	Port
- BYTE	Return

CheckForTCPType

	CheckForTCPType
Checks to what kind of TCP type the received data is requesting. Returns a bit field specifying the type of request. 0x01 = Ack Requires, 0x02 = Synchronise 0x10 = Ack
- BYTE	Return

ClientSendPacket

	ClientSendPacket
- UINT	DestPort
- UINT	SourcePort
- BYTE	Flags
- BYTE	MaxSegmentSize
- BYTE	ClearSeqAck
- UINT	NextAckNum
- UINT	DataLength
- BYTE	DestMac
- BYTE	DestIp
- VOID	Return

ControlLEDs

	ControlLEDs
Allows both the LEDs on the Ethernet socket to be controlled. Useful for checking if the SPI communications are functioning correctly.
- BYTE	Mode
0=Off, 1=On, 2=Auto
- VOID	Return

FillTcpArray

	FillTcpArray
- UINT	Position
- UINT	Count
- BYTE	Data
- VOID	Return

FillTcpData

	FillTcpData
- UINT	Position
- STRING	Data
- UINT	Return

GetDataLength

	GetDataLength
Returns the number of received data bytes after the headers
- UINT	Return

GetModuleRevision

	GetModuleRevision
Requets the module revision number and returns the value supplied by the module's firmware.
- BYTE	Return

GetSendersMAC

	GetSendersMAC
Gets the MAC address from locations 6-11 of the IP Header
- BYTE	MAC
6-byte Array to store the MAC address
- VOID	Return

GetTcpDataPointer

	GetTcpDataPointer
- UINT	Return

Initialise

	Initialise
Initialises the SPI connection to the TCPIP module and sets up some initial values. Flashes the LEDs on and off twice to confirm SPI comms are active. LEDs are then configured to auto functionality.
- VOID	Return

InitialiseDataLengthInfo

	InitialiseDataLengthInfo
Initialises the data pointers to allow us to craft a response containing data
- VOID	Return

MakeArpAnswerFromRequest

	MakeArpAnswerFromRequest
- VOID	Return

MakeArpRequest

	MakeArpRequest
[[File:]] -	ServerIP
- VOID	Return

MakeEchoReplyFromRequest

	MakeEchoReplyFromRequest
- UINT	Length
- VOID	Return

MakeTcpAckFromAny

	MakeTcpAckFromAny
- UINT	Port
- VOID	Return

MakeTcpAckWithData

	MakeTcpAckWithData
- UINT	DataLength
- VOID	Return

MakeTcpSynackFromSyn

	MakeTcpSynackFromSyn
- UINT	Port
- VOID	Return

PacketReceive

	PacketReceive
Attempts to receive a data packet from the ENC28J60 module. Returns the number of bytes received.
- UINT	Return

PacketSend

	PacketSend
Attempts to transmit a data packet to the ENC28J60 module.
- UINT	Length
- VOID	Return

ReadRegister

	ReadRegister
Reads the value from a single register onboard the ENC28J60 module.
- BYTE	Address
- BYTE	Return

ReadStringFromBuffer

	ReadStringFromBuffer
Reads a string from the buffer at location specified for the number of bytes specified. If a space character is encountered then the macro will return straight away without the space character in the string.
- UINT	BufferLocation
- BYTE	NumberOfBytes
Number of bytes to read from the buffer and store into string
- STRING	Return

WriteRegister

	WriteRegister
Writes a value to a single register onboard the ENC28J60 module.
- BYTE	Address
- BYTE	Data
- VOID	Return

Property reference

Properties