Bot test

	ev_Prop_Change
- ULONG	Return

	StringRead
Returns the ASCII value of character idx of the Response string.
- BYTE	idx
Needs to be a equal to or less than the string length of the response in order to retrieve a valid character.
- BYTE	Return

	Ev_Timer
Called back on the panel command System.TimerStart
- ULONG	TimerID
The identifier passed to the System.TimerStart panel command
- ULONG	Return

	SendScript
Sends Script idx Note that the general property Number of Scripts needs to be set so that it allows the scripts to be accessed and sent. Returns 0 for success and 1 for error
- BYTE	idx
Refers to the Script page to send (1-4).
- BYTE	Return

	SendCommand
Sends the command buffer. Returns 1 for success in sending the command. Returns 0 for errors.
- BYTE	ExpectEcho
Remote module automatically echos back data: 1 = On (Expect echo), 0 = off
- BYTE	SendCR
Automatically adds \n to the end of the command data: 1 = append CR, 0 = no CR.
- BYTE	Return

	SendScriptString
- STRING	str
- VOID	Return

	Ev_ChipChange
Sent when the target device has changed
[[File:]] -	Target
The name of the new target device
- ULONG	Return

	Read_byte
- BYTE	Timeout
- BYTE	Return

	CreateCommandString
Assigns a string of characters to the Command buffer. Returns 1 for success in adding the characters to the buffer. Returns 0 for errors, including Buffer overflow.
- STRING	Data
- BYTE	Return

	ev_Init
- ULONG	Return

	StringReceive
Checks for a response string. Returns the length of the response string if one is present otherwise returns 0.
- BYTE	Return

	Ev_GetVarSize
Sent to a component to amend the size of the expected array
[[File:]] -	VarName
The original Flowcode variable
[[File:]] -	Elements
The number of elements in the array
- ULONG	Return

	CreateCommand
Adds a single characters to the end of the Command buffer. Returns 1 for success in adding the characters to the buffer. Returns 0 for errors, including Buffer overflow.
- BYTE	Character
ASCII value or single character,
- BYTE	Return

	Send_byte
- BYTE	ByteVal
- VOID	Return

	WaitForResponse
Waits for a response message of type response_code for timeout ms. Returns: 0 for a Response of type response_code 255 (0xFF) for a timeout or invalid response Response string length for any Response not of type response_code
- BYTE	response_code
1:OK / 2:ERROR / 3:CONNECT / 4:NO CARRIER / 5:AUDIO / 6:PAIR / 7:RING
- BYTE	timeout
The timeout value will need to set to allow sufficient time for the response to arrive.
- BYTE	Return

	Main
- VOID	Return

	pvt_Scripts_ShowHide
- VOID	Return

	Initialise
Required to be used whenever the Bluetooth component is used in a program. Initialises the Bluetooth component ready for use.
- VOID	Return