Difference between revisions of "Component: Potentiometer (Black) ()"
From Flowcode Help
Jump to navigationJump to search| Line 20: | Line 20: | ||
==Detailed description== | ==Detailed description== | ||
| + | |||
| + | |||
| Line 28: | Line 30: | ||
==Examples== | ==Examples== | ||
| + | |||
| + | |||
| Line 38: | Line 42: | ||
{{Fcfile|Potentiometer Example.fcfx|Potentiometer Example}} | {{Fcfile|Potentiometer Example.fcfx|Potentiometer Example}} | ||
| − | == | + | ==Macro reference== |
Revision as of 14:14, 20 January 2023
| Author | Matrix Ltd |
| Version | 1.4 |
| Category |
Contents
Potentiometer (Black) component
Potentiometer with black plastic knob. Pointer colour can be changed in component properties.
Component Source Code
Please click here for the component source code: FC_Comp_Source_pot_Black.fcfx
Detailed description
No detailed description exists yet for this component
Examples
A simple example that shows how to use some common functions of the potentiometer in conjunction with an LCD.
Macro reference
Property reference
|
Properties |
|
Simulation |
|
Start Angle |
| Angle the control points to at its lowest setting. Measured counter-clockwise from the positive x-axis. | |
|
|
Sweep Angle |
| Angle through which the control sweeps as it turns from minimum to maximum. | |
|
Color |
| Colour of the pointer. | |
|
Scope Traces |
| Selects if the scope traces are automatically generated or not | |
|
|
Retain Value |
| If yes is slected After saving your project, the ADC value will be retained when your project is reloaded. | |
|
|
Connections |
|
Channel |
| Analogue input channel - which pin is the analogue input conected to? | |
|
|
Settings |
|
VRef voltage |
| Used by the GetVoltage or GetString component macros to take an ADC reading and convert it into a Voltage. +VRef voltage x 10mV Default 500 = 5.0V | |
|
VRef option |
| Defines what is used as the ADC maximum reference. ADC Range = GND to VRef Voltage. VDD - Defines the microcontrollers power supply pin as the max reference, VREF+ Pin - Dedicated pin on the microcontroller to allow for a variable reference voltage. | |
|
|
Conversion speed |
| Clock setting to select how fast the ADC peripheral will perform an ADC conversion. The FRC setting is based on a RC time base and so will vary with temperature and pressure. Other settings are generally based on divisions of the master clock. | |
|
|
Acquisition cycles |
| Number of micro seconds to wait for the ACD input to charge before starting the analogue sample. | |
|
|
Bit Depth |
| Maximum number of digital bits the ADC can sample. 8 bit = ADC range 0 - 255 10 bit = ADC range 0 - 1023 12 bit = ADC range 0 - 4095 | |
