Component: Marking control (Misc)

Author	Matrix Ltd
Version	1.1
Category	Misc

Marking control component

A control to draw markings on any component

Component Source Code

Please click here to view the component source code (Beta): FC_Comp_Source_markings.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

	DrawStripY
Draw the marks on the readout Set up the position and range with SetRange() and SetSpan()
- INT	OffsetX
Offset to add to X
- VOID	Return

	SetTarget
Sets the target image to draw on
- ULONG	Target
- INT	AreaX
The X area to draw on
- INT	AreaY
The Y area to draw on
- BOOL	AutoCreate
Set true to auto-create the graphic
- VOID	Return

	DrawStripX
Draw the marks on the readout Set up the position and range with SetRange() and SetSpan()
- INT	OffsetY
Offset to add to Y
- VOID	Return

	BoundRange
Bounds a range to be between RangeStart and RangeEnd
- FLOAT	Range
The unbounded range
- FLOAT	Return

	DrawArc
Draw the marks on the readout Set up the position and range with SetRange() and SetArc()
- FLOAT	Radius
Scale of the radius to draw at
- VOID	Return

	SetAngles
Sets the min-max angles to draw on the dial Used for setting the needle Defaults are 135 and -45
- INT	Start
- INT	End
- VOID	Return

	SetShow
Decides on the presentation of the dial
- BOOL	ShowNumbers
True to show numbers on the dial, else false
- BOOL	ShowMarks
Show marks
- VOID	Return

	CalcScaleRange
Decide the range value for a 0->1 value Returned value may be out of range
- FLOAT	ScaledRange
- FLOAT	Return

	CalcAngRange
Decide the range value for an angle Returned value may be out of range
- FLOAT	AngleDegrees
- FLOAT	Return

	CalcScale
Decide the scale (0->1) to display at given a range value
- FLOAT	RangeVal
- FLOAT	Return

	SetMarks
Decides on the presentation of the dial
- INT	Marks
Number of marks on the dial
- INT	Subs
Number of marks before a 'main' mark - can be zero
- VOID	Return

	ClearArea
Clears the draw area
- VOID	Return

	SetRange
Sets the min-max range to draw on the dial Used for setting the needle
- INT	Start
- INT	End
- VOID	Return

	SetGaps
Sets the min-max of the span to draw on the X/Y marks Defaults are 0 and 1
- INT	Start
- INT	End
- VOID	Return

	SetJustify
- BOOL	RAlign
True for right/top/outer alignment
- VOID	Return

	CalcAngle
Decide the angle to display at given a range value
- FLOAT	RangeVal
- FLOAT	Return

Property reference

Properties

==Macro reference==

	DrawStripY
Draw the marks on the readout Set up the position and range with SetRange() and SetSpan()
- INT	OffsetX
Offset to add to X
- VOID	Return

	SetTarget
Sets the target image to draw on
- ULONG	Target
- INT	AreaX
The X area to draw on
- INT	AreaY
The Y area to draw on
- BOOL	AutoCreate
Set true to auto-create the graphic
- VOID	Return

	DrawStripX
Draw the marks on the readout Set up the position and range with SetRange() and SetSpan()
- INT	OffsetY
Offset to add to Y
- VOID	Return

	BoundRange
Bounds a range to be between RangeStart and RangeEnd
- FLOAT	Range
The unbounded range
- FLOAT	Return

	DrawArc
Draw the marks on the readout Set up the position and range with SetRange() and SetArc()
- FLOAT	Radius
Scale of the radius to draw at
- VOID	Return

	SetAngles
Sets the min-max angles to draw on the dial Used for setting the needle Defaults are 135 and -45
- INT	Start
- INT	End
- VOID	Return

	SetShow
Decides on the presentation of the dial
- BOOL	ShowNumbers
True to show numbers on the dial, else false
- BOOL	ShowMarks
Show marks
- VOID	Return

	CalcScaleRange
Decide the range value for a 0->1 value Returned value may be out of range
- FLOAT	ScaledRange
- FLOAT	Return

	CalcAngRange
Decide the range value for an angle Returned value may be out of range
- FLOAT	AngleDegrees
- FLOAT	Return

	CalcScale
Decide the scale (0->1) to display at given a range value
- FLOAT	RangeVal
- FLOAT	Return

	SetMarks
Decides on the presentation of the dial
- INT	Marks
Number of marks on the dial
- INT	Subs
Number of marks before a 'main' mark - can be zero
- VOID	Return

	ClearArea
Clears the draw area
- VOID	Return

	SetRange
Sets the min-max range to draw on the dial Used for setting the needle
- INT	Start
- INT	End
- VOID	Return

	SetGaps
Sets the min-max of the span to draw on the X/Y marks Defaults are 0 and 1
- INT	Start
- INT	End
- VOID	Return

	SetJustify
- BOOL	RAlign
True for right/top/outer alignment
- VOID	Return

	CalcAngle
Decide the angle to display at given a range value
- FLOAT	RangeVal
- FLOAT	Return

Property reference

Properties