Difference between revisions of "Component: API (ESP32) (API Slave Devices)"
Line 16: | Line 16: | ||
==Component Source Code== | ==Component Source Code== | ||
+ | |||
+ | Please click here to download the component source project: [https://www.flowcode.co.uk/wikicopy/componentsource/FC_Comp_Source_ESP32_API_Comp.fcfx FC_Comp_Source_ESP32_API_Comp.fcfx] | ||
Please click here to view the component source code (Beta): [https://www.flowcode.co.uk/FlowchartView/?wfile=componentsource/FC_Comp_Source_ESP32_API_Comp.fcfx FC_Comp_Source_ESP32_API_Comp.fcfx] | Please click here to view the component source code (Beta): [https://www.flowcode.co.uk/FlowchartView/?wfile=componentsource/FC_Comp_Source_ESP32_API_Comp.fcfx FC_Comp_Source_ESP32_API_Comp.fcfx] | ||
==Detailed description== | ==Detailed description== | ||
+ | |||
+ | |||
Line 63: | Line 67: | ||
==Examples== | ==Examples== | ||
+ | |||
+ | |||
Line 323: | Line 329: | ||
==Macro reference== | ==Macro reference== | ||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CInitialise''' | ||
+ | |- | ||
+ | | colspan="2" | Initialise the I2C module ready for communications | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Baud | ||
+ | |- | ||
+ | | colspan="2" | 0=100KHz, 1=400KHz, 2=1MHz | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleArray8''' | ||
+ | |- | ||
+ | | colspan="2" | Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | ADCChannel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0, 3-7 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | SampleCount | ||
+ | |- | ||
+ | | colspan="2" | Range: 1- 32 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" | SampleDelay | ||
+ | |- | ||
+ | | colspan="2" | Delay in us between each sample | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Samples | ||
+ | |- | ||
+ | | colspan="2" | 8-bit samples returned from the function | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPITransferTrans''' | ||
+ | |- | ||
+ | | colspan="2" | Transfer an array of bytes using the SPI bus | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" | Count | ||
+ | |- | ||
+ | | colspan="2" | Number of bytes to send and receive | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | DataOut | ||
+ | |- | ||
+ | | colspan="2" | Outgoing data | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | DataIn | ||
+ | |- | ||
+ | | colspan="2" | Incoming data | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireBusReset''' | ||
+ | |- | ||
+ | | colspan="2" | Issue a 'ping' on the bus. If there is at least one sensor on the bus then it will generate a presence pulse. Returns 0 if a presense pulse was detected Returns 1 no device was detected | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-bool-icon.png]] - BOOL | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IOGetInputPin''' | ||
+ | |- | ||
+ | | colspan="2" | Sets the selected digital pin to an input and reads the input state. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Pin | ||
+ | |- | ||
+ | | colspan="2" | Range: 0-29 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-bool-icon.png]] - BOOL | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTBaud''' | ||
+ | |- | ||
+ | | colspan="2" | Control the communications rate of the UART module | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - UART Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Rate | ||
+ | |- | ||
+ | | colspan="2" | 0=1200, 1=2400, 2=4800, 3=9600, 4=19200, 5=38400, 6=57600, 7=115200 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireInitialise''' | ||
+ | |- | ||
+ | | colspan="2" | Initialise the OneWire module ready for communications | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireMatchROM''' | ||
+ | |- | ||
+ | | colspan="2" | Performs a reset followed by the MatchROM code and then the 8-bit ROM code. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | FamilyCode | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | SerialNumber | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSample8''' | ||
+ | |- | ||
+ | | colspan="2" | Reads the voltage present on an Analog pin as an 8-bit value range 0-255 | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | ADCChannel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0, 3-7 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CTransReceive''' | ||
+ | |- | ||
+ | | colspan="2" | Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Data | ||
+ | |- | ||
+ | | colspan="2" | Data variable to receive into | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" | Count | ||
+ | |- | ||
+ | | colspan="2" | Number of bytes to receive | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTInitialise''' | ||
+ | |- | ||
+ | | colspan="2" | Initialise the UART module ready for communications | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - UART Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTCheckRX''' | ||
+ | |- | ||
+ | | colspan="2" | Check to see if the UART module has received any data | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - UART Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSetPrechargeTime''' | ||
+ | |- | ||
+ | | colspan="2" | Specifies the precharge time for the ADC input readings in microseconds. The longer the time the more immune to noise the reading will be. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | ChargeTime | ||
+ | |- | ||
+ | | colspan="2" | Default 10 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireTransmitByte''' | ||
+ | |- | ||
+ | | colspan="2" | Transmit a byte to the one wire bus a bit at a time | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Data | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CRestart''' | ||
+ | |- | ||
+ | | colspan="2" | Put the I2C Module into Restart mode | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMDisable''' | ||
+ | |- | ||
+ | | colspan="2" | Disable a PWM output | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0-11 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CStart''' | ||
+ | |- | ||
+ | | colspan="2" | Put the I2C Module into Start mode | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPITransfer''' | ||
+ | |- | ||
+ | | colspan="2" | Transfer a byte using the SPI bus | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | DataOut | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CReceive''' | ||
+ | |- | ||
+ | | colspan="2" | Receive a byte using the I2C bus | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-bool-icon.png]] - BOOL | ||
+ | | width="90%" | Last | ||
+ | |- | ||
+ | | colspan="2" | Last byte to receive: Range 0-1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireGetIDByte''' | ||
+ | |- | ||
+ | | colspan="2" | Returns a single byte of the 64-Bit lasered ROM code, 255 on error | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Device | ||
+ | |- | ||
+ | | colspan="2" | Device ID - Range: 0 - NumDevices - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | ByteIndex | ||
+ | |- | ||
+ | | colspan="2" | Index of the data byte. 0=FamilyCode, 1-6=Serial, 7=CRC | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMSetFrequency''' | ||
+ | |- | ||
+ | | colspan="2" | Sets PWM frequency in Hz | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0 - 11 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-s32-icon.png]] - LONG | ||
+ | | width="90%" | Frequency | ||
+ | |- | ||
+ | | colspan="2" | Frequency (Hz) | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CStop''' | ||
+ | |- | ||
+ | | colspan="2" | Put the I2C Module into Stop mode | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSetReferenceVoltage''' | ||
+ | |- | ||
+ | | colspan="2" | Specified the reference setting for ADC reads. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | RefType | ||
+ | |- | ||
+ | | colspan="2" | 0=AREF, 1=VCC, 3=Internal 1.1V | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireSkipROM''' | ||
+ | |- | ||
+ | | colspan="2" | Performs a bus reset and the sends the SkipROM command byte | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPIPrescaler''' | ||
+ | |- | ||
+ | | colspan="2" | Modify the speed of the SPI bus | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Prescaler | ||
+ | |- | ||
+ | | colspan="2" | Range: 0-2 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMSetDuty''' | ||
+ | |- | ||
+ | | colspan="2" | Sets the duty for the PWM output | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0-11 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Duty | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSample10''' | ||
+ | |- | ||
+ | | colspan="2" | Reads the voltage present on an Analog pin as an 12-bit value range 0-4095 | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | ADCChannel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0, 3-7 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CTransSend''' | ||
+ | |- | ||
+ | | colspan="2" | Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Data | ||
+ | |- | ||
+ | | colspan="2" | Data to send | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" | Count | ||
+ | |- | ||
+ | | colspan="2" | Number of bytes to send out, MS bit 0x8000 signifies no Stop if set | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CTransInit''' | ||
+ | |- | ||
+ | | colspan="2" | Initialises the I2C Transaction mode with the 7-bit device address | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | DeviceAddress | ||
+ | |- | ||
+ | | colspan="2" | 7-bit Device Address | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Baud | ||
+ | |- | ||
+ | | colspan="2" | 0=100KHz, 1=400KHz, 2=1MHz | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IOSetOutputPin''' | ||
+ | |- | ||
+ | | colspan="2" | Sets the selected digital pin to an output and assigns the output state. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Pin | ||
+ | |- | ||
+ | | colspan="2" | Range: 0-29 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-bool-icon.png]] - BOOL | ||
+ | | width="90%" | State | ||
+ | |- | ||
+ | | colspan="2" | Range: 0-1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTReceive''' | ||
+ | |- | ||
+ | | colspan="2" | Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - UART Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleAverage10''' | ||
+ | |- | ||
+ | | colspan="2" | Reads the voltage present on an Analog pin as an 10-bit value range 0-1023. Performs the selected number of samples with the selected time in microseconds in between samples | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | ADCChannel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0, 3-7 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | SampleCount | ||
+ | |- | ||
+ | | colspan="2" | Range: 1- 100 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | SampleDelay | ||
+ | |- | ||
+ | | colspan="2" | Delay in us between each sample | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireScanBus''' | ||
+ | |- | ||
+ | | colspan="2" | Scans the one wire bus to detect all connected devices. Returns the number of one wire devices found. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPIInitialise''' | ||
+ | |- | ||
+ | | colspan="2" | Initialsie the SPI module ready for communications | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireReceiveByte''' | ||
+ | |- | ||
+ | | colspan="2" | Receives a byte from the one wire bus a bit at a time | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CSend''' | ||
+ | |- | ||
+ | | colspan="2" | Transmit a byte using the I2C bus | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | DataOut | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-bool-icon.png]] - BOOL | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTSend''' | ||
+ | |- | ||
+ | | colspan="2" | Send a byte via the UART module | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - UART Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Data | ||
+ | |- | ||
+ | | colspan="2" | Data Byte to send. Range: 0-255 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireGetDeviceCount''' | ||
+ | |- | ||
+ | | colspan="2" | Returns the number of devices found by the last ScanBus operation. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMEnable''' | ||
+ | |- | ||
+ | | colspan="2" | Enable a PWM output | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | Channel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0-11 | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleArray10''' | ||
+ | |- | ||
+ | | colspan="2" | Reads the voltage present on an Analog pin as an 10-bit value range 0-1023 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | ADCChannel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0, 3-7 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | SampleCount | ||
+ | |- | ||
+ | | colspan="2" | Range: 1- 32 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" | SampleDelay | ||
+ | |- | ||
+ | | colspan="2" | Delay in us between each sample | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT | ||
+ | | width="90%" | Samples | ||
+ | |- | ||
+ | | colspan="2" | 10-bit samples returned from the function | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleAverage8''' | ||
+ | |- | ||
+ | | colspan="2" | Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | ADCChannel | ||
+ | |- | ||
+ | | colspan="2" | Range: 0, 3-7 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | SampleCount | ||
+ | |- | ||
+ | | colspan="2" | Range: 1- 100 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" | SampleDelay | ||
+ | |- | ||
+ | | colspan="2" | Delay in us between each sample | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise''' | ||
+ | |- | ||
+ | | colspan="2" | Initialise the comms to the Arduino board ready for commands to be sent. | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID | ||
+ | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
+ | |} | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ==Property reference== | ||
+ | |||
+ | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-prop-icon.png]] | ||
+ | | width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Properties''' | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]] | ||
+ | | width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Connection | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-10-icon.png]] | ||
+ | | width="90%" | ESP IP Address | ||
+ | |- | ||
+ | | colspan="2" | IP Address of the Raspbery Pi we want to control | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | ESP Port | ||
+ | |- | ||
+ | | colspan="2" | Port number we want to communicate on. Default 1234 | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-16-icon.png]] | ||
+ | | width="90%" | Network Interface | ||
+ | |- | ||
+ | | colspan="2" | Some computers may have several network interfaces such as ethernet ports and wifi access. Select the correct network interface for the network you wish to connect to. Use the IP address to confirm you are connected to the right network. | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-10-icon.png]] | ||
+ | | width="90%" | IP Address | ||
+ | |- | ||
+ | | colspan="2" | IP Address of the selected network interface. | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]] | ||
+ | | width="90%" style="background-color:#EAE1EA; color:#4B008D;" | API Peripherals | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | Digital IO | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | Analog Input | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | Analog Output | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | PWM Output | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | I2C Bus | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | SPI Bus | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | UART | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | OneWire | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-21-icon.png]] | ||
+ | | width="90%" | SERVO | ||
+ | |- | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]] | ||
+ | | width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Console | ||
+ | |- | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-7-icon.png]] | ||
+ | | width="90%" | Console Log | ||
+ | |- | ||
+ | | colspan="2" | Create an automatic console log of the commands sent to the ESP | ||
+ | |- | ||
+ | | width="10%" align="center" | [[File:Fc9-type-16-icon.png]] | ||
+ | | width="90%" | Log Mode | ||
+ | |- | ||
+ | | colspan="2" | Controls how the console data is formatted. Fixed statistics gives an easy to read overview of the IO, Analog and PWM functionality Command Log gives a more in depth analysis of the outgoing commands and incoming returns ASCII mode allows serial data to be shown in raw text form, other commands are shown as in the Command Log mode | ||
+ | |}==Macro reference== | ||
{| class="wikitable" style="width:60%; background-color:#FFFFFF;" | {| class="wikitable" style="width:60%; background-color:#FFFFFF;" |
Revision as of 15:21, 20 January 2023
Author | Matrix TSL |
Version | 2.0 |
Category | API Slave Devices |
Contents
API (ESP32) component
Connects to an ESP32 device running the API Firmware allowing the board to become a slave to the Flowcode Embedded simulation or Flowcode App Developer. Supports: Digital IO / ADC / I2C / SPI / PWM / UART See Flowcode Help Wiki for firmware.
Component Source Code
Please click here to download the component source project: FC_Comp_Source_ESP32_API_Comp.fcfx
Please click here to view the component source code (Beta): FC_Comp_Source_ESP32_API_Comp.fcfx
Detailed description
The App Developer (ESP32) component allows an ESP32 board to be controlled from within the Flowcode simulation runtime.
To allow Flowcode to communicate and control the ESP32 hardware the board must first be pre-programmed with dedicated firmware.
The firmware source project can be downloaded from here.
You will need to set your WIFI SSID and Password near the top of Main to allow the ESP module to connect to your network.
More information about the workings of the firmware project can be found on the FiniteStateMachine page.
The IP Address to the ESP32 hardware is selected via the SCADA_ESP32 component IP Address property.
When building the component into a App Developer project remember to expose the IP Address property to allow the end user to select the address for the hardware.
The console window can display data in two modes which is set via a component property.
- fixed statistics showing IO / ADC inputs / PWM
- scrolling log showing all commands and returns
Examples
Pin Mapping
Here is a table showing how the App Developer Slave digital pins are mapped on the device.
Please note pins 34, 35, 36, 39 are only capable of digital inputs and cannot be used as digital outputs.
App Developer Slave Digital Pin | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 21 | 22 | 23 | 25 | 26 | 27 | 32 | 33 | 34 | 35 | 36 | 39 |
Device Port Pin | A0 | A1 | A2 | A3 | A4 | A5 | A6 | A7 | A8 | A9 | A10 | A11 | A12 | A13 | A14 | A15 | A16 | A17 | A18 | A19 | A21 | A22 | A23 | A25 | A26 | A27 | B0 | B1 | B2 | B3 | B4 | B7 |
GPIO Number | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 21 | 22 | 23 | 25 | 26 | 27 | 32 | 33 | 34 | 35 | 36 | 39 |
Here is a table showing how the App Developer Slave analogue pins are mapped on the device.
Please note not all analogue input pins are available as peripheral ADC2 is not accesible when WIFI/Bluetooth is active. Only the pins shown are available.
App Developer Slave Analogue Pin | 0 | 3 | 4 | 5 | 6 | 7 |
Device Port Pin | B4 | B7 | B0 | B1 | B2 | B3 |
GPIO Number | 36 | 39 | 32 | 33 | 34 | 35 |
Here is a table showing how the App Developer Slave peripheral pins are mapped on the device.
Please note that PWM channels are tied in pairs and so channel 0 and 1 use the same internal timer peripheral. They will always run at the same frequency and when enabling channel 1 channel 0 duty will be reset to 0% and visa versa.
App Developer Slave Peripheral Pin | I2C 0 SDA | I2C 0 SCL | I2C 1 SDA | I2C 1 SCL | SPI 0 MOSI | SPI 0 MISO | SPI 0 SCK | SPI 1 MOSI | SPI 1 MISO | SPI 1 SCK | UART 0 RX | UART 0 TX | UART 1 RX | UART 1 TX | PWM 0 | PWM 1 | PWM 2 | PWM 3 | PWM 4 | PWM 5 | PWM 6 | PWM 7 | PWM 8 | PWM 9 | PWM 10 | PWM 11 | OneWire |
Device Port Pin | A13 | A12 | A15 | A14 | A9 | A10 | A11 | A6 | A7 | A8 | A26 | A25 | B0 | B1 | A0 | A2 | A4 | A5 | A12 | A13 | A14 | A15 | A16 | A17 | A18 | A19 | A21 |
GPIO Number | 13 | 12 | 15 | 14 | 9 | 10 | 11 | 6 | 7 | 8 | 26 | 25 | 32 | 33 | 0 | 2 | 4 | 5 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 21 |
PortA = GPIO pins 0 - 31 : A0 = GPIO 0
PortB = GPIO pins 32 - 39 : B0 = GPIO 32
Macro reference
I2CInitialise | |
Initialise the I2C module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Baud |
0=100KHz, 1=400KHz, 2=1MHz | |
- VOID | Return |
IOGetInputPin | |
Sets the selected digital pin to an input and reads the input state. | |
- BYTE | Pin |
Range: 0-29 | |
- BOOL | Return |
OneWireInitialise | |
Initialise the OneWire module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
ADCSample8 | |
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 | |
- BYTE | ADCChannel |
Range: 0, 3-7 | |
- BYTE | Return |
UARTInitialise | |
Initialise the UART module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- VOID | Return |
UARTCheckRX | |
Check to see if the UART module has received any data | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- BYTE | Return |
OneWireTransmitByte | |
Transmit a byte to the one wire bus a bit at a time | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Data |
- VOID | Return |
I2CRestart | |
Put the I2C Module into Restart mode | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
PWMDisable | |
Disable a PWM output | |
- BYTE | Channel |
Range: 0-11 | |
- VOID | Return |
I2CStart | |
Put the I2C Module into Start mode | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
SPITransfer | |
Transfer a byte using the SPI bus | |
- BYTE | Channel |
Channel Index: Range 0 - SPI Bus Count - 1 | |
- BYTE | DataOut |
- BYTE | Return |
I2CReceive | |
Receive a byte using the I2C bus | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BOOL | Last |
Last byte to receive: Range 0-1 | |
- BYTE | Return |
PWMSetFrequency | |
Sets PWM frequency in Hz | |
- BYTE | Channel |
Range: 0 - 11 | |
- LONG | Frequency |
Frequency (Hz) | |
- VOID | Return |
I2CStop | |
Put the I2C Module into Stop mode | |
- BYTE | Channel |
- VOID | Return |
ADCSetReferenceVoltage | |
Specified the reference setting for ADC reads. | |
- BYTE | RefType |
0=AREF, 1=VCC, 3=Internal 1.1V | |
- VOID | Return |
OneWireSkipROM | |
Performs a bus reset and the sends the SkipROM command byte | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
SPIPrescaler | |
Modify the speed of the SPI bus | |
- BYTE | Channel |
Channel Index: Range 0 - SPI Bus Count - 1 | |
- BYTE | Prescaler |
Range: 0-2 | |
- VOID | Return |
PWMSetDuty | |
Sets the duty for the PWM output | |
- BYTE | Channel |
Range: 0-11 | |
- BYTE | Duty |
- VOID | Return |
ADCSample10 | |
Reads the voltage present on an Analog pin as an 12-bit value range 0-4095 | |
- BYTE | ADCChannel |
Range: 0, 3-7 | |
- UINT | Return |
IOSetOutputPin | |
Sets the selected digital pin to an output and assigns the output state. | |
- BYTE | Pin |
Range: 0-29 | |
- BOOL | State |
Range: 0-1 | |
- VOID | Return |
UARTReceive | |
Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available. | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- BYTE | Return |
OneWireScanBus | |
Scans the one wire bus to detect all connected devices. Returns the number of one wire devices found. | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Return |
SPIInitialise | |
Initialsie the SPI module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - SPI Bus Count - 1 | |
- VOID | Return |
OneWireReceiveByte | |
Receives a byte from the one wire bus a bit at a time | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Return |
I2CSend | |
Transmit a byte using the I2C bus | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | DataOut |
- BOOL | Return |
UARTSend | |
Send a byte via the UART module | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- BYTE | Data |
Data Byte to send. Range: 0-255 | |
- VOID | Return |
OneWireGetDeviceCount | |
Returns the number of devices found by the last ScanBus operation. | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Return |
PWMEnable | |
Enable a PWM output | |
- BYTE | Channel |
Range: 0-11 | |
- VOID | Return |
Initialise | |
Initialise the comms to the Arduino board ready for commands to be sent. | |
- VOID | Return |
Property reference
==Macro reference==
I2CInitialise | |
Initialise the I2C module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Baud |
0=100KHz, 1=400KHz, 2=1MHz | |
- VOID | Return |
IOGetInputPin | |
Sets the selected digital pin to an input and reads the input state. | |
- BYTE | Pin |
Range: 0-29 | |
- BOOL | Return |
OneWireInitialise | |
Initialise the OneWire module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
ADCSample8 | |
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 | |
- BYTE | ADCChannel |
Range: 0, 3-7 | |
- BYTE | Return |
UARTInitialise | |
Initialise the UART module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- VOID | Return |
UARTCheckRX | |
Check to see if the UART module has received any data | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- BYTE | Return |
OneWireTransmitByte | |
Transmit a byte to the one wire bus a bit at a time | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Data |
- VOID | Return |
I2CRestart | |
Put the I2C Module into Restart mode | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
PWMDisable | |
Disable a PWM output | |
- BYTE | Channel |
Range: 0-11 | |
- VOID | Return |
I2CStart | |
Put the I2C Module into Start mode | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
SPITransfer | |
Transfer a byte using the SPI bus | |
- BYTE | Channel |
Channel Index: Range 0 - SPI Bus Count - 1 | |
- BYTE | DataOut |
- BYTE | Return |
I2CReceive | |
Receive a byte using the I2C bus | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BOOL | Last |
Last byte to receive: Range 0-1 | |
- BYTE | Return |
PWMSetFrequency | |
Sets PWM frequency in Hz | |
- BYTE | Channel |
Range: 0 - 11 | |
- LONG | Frequency |
Frequency (Hz) | |
- VOID | Return |
I2CStop | |
Put the I2C Module into Stop mode | |
- BYTE | Channel |
- VOID | Return |
ADCSetReferenceVoltage | |
Specified the reference setting for ADC reads. | |
- BYTE | RefType |
0=AREF, 1=VCC, 3=Internal 1.1V | |
- VOID | Return |
OneWireSkipROM | |
Performs a bus reset and the sends the SkipROM command byte | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
SPIPrescaler | |
Modify the speed of the SPI bus | |
- BYTE | Channel |
Channel Index: Range 0 - SPI Bus Count - 1 | |
- BYTE | Prescaler |
Range: 0-2 | |
- VOID | Return |
PWMSetDuty | |
Sets the duty for the PWM output | |
- BYTE | Channel |
Range: 0-11 | |
- BYTE | Duty |
- VOID | Return |
ADCSample10 | |
Reads the voltage present on an Analog pin as an 12-bit value range 0-4095 | |
- BYTE | ADCChannel |
Range: 0, 3-7 | |
- UINT | Return |
IOSetOutputPin | |
Sets the selected digital pin to an output and assigns the output state. | |
- BYTE | Pin |
Range: 0-29 | |
- BOOL | State |
Range: 0-1 | |
- VOID | Return |
UARTReceive | |
Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available. | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- BYTE | Return |
OneWireScanBus | |
Scans the one wire bus to detect all connected devices. Returns the number of one wire devices found. | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Return |
SPIInitialise | |
Initialsie the SPI module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - SPI Bus Count - 1 | |
- VOID | Return |
OneWireReceiveByte | |
Receives a byte from the one wire bus a bit at a time | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Return |
I2CSend | |
Transmit a byte using the I2C bus | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | DataOut |
- BOOL | Return |
UARTSend | |
Send a byte via the UART module | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- BYTE | Data |
Data Byte to send. Range: 0-255 | |
- VOID | Return |
OneWireGetDeviceCount | |
Returns the number of devices found by the last ScanBus operation. | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Return |
PWMEnable | |
Enable a PWM output | |
- BYTE | Channel |
Range: 0-11 | |
- VOID | Return |
Initialise | |
Initialise the comms to the Arduino board ready for commands to be sent. | |
- VOID | Return |
Property reference
==Macro reference==
I2CInitialise | |
Initialise the I2C module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Baud |
0=100KHz, 1=400KHz, 2=1MHz | |
- VOID | Return |
IOGetInputPin | |
Sets the selected digital pin to an input and reads the input state. | |
- BYTE | Pin |
Range: 0-29 | |
- BOOL | Return |
OneWireInitialise | |
Initialise the OneWire module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
ADCSample8 | |
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 | |
- BYTE | ADCChannel |
Range: 0, 3-7 | |
- BYTE | Return |
UARTInitialise | |
Initialise the UART module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- VOID | Return |
UARTCheckRX | |
Check to see if the UART module has received any data | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- BYTE | Return |
OneWireTransmitByte | |
Transmit a byte to the one wire bus a bit at a time | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Data |
- VOID | Return |
I2CRestart | |
Put the I2C Module into Restart mode | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
PWMDisable | |
Disable a PWM output | |
- BYTE | Channel |
Range: 0-11 | |
- VOID | Return |
I2CStart | |
Put the I2C Module into Start mode | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
SPITransfer | |
Transfer a byte using the SPI bus | |
- BYTE | Channel |
Channel Index: Range 0 - SPI Bus Count - 1 | |
- BYTE | DataOut |
- BYTE | Return |
I2CReceive | |
Receive a byte using the I2C bus | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BOOL | Last |
Last byte to receive: Range 0-1 | |
- BYTE | Return |
PWMSetFrequency | |
Sets PWM frequency in Hz | |
- BYTE | Channel |
Range: 0 - 11 | |
- LONG | Frequency |
Frequency (Hz) | |
- VOID | Return |
I2CStop | |
Put the I2C Module into Stop mode | |
- BYTE | Channel |
- VOID | Return |
ADCSetReferenceVoltage | |
Specified the reference setting for ADC reads. | |
- BYTE | RefType |
0=AREF, 1=VCC, 3=Internal 1.1V | |
- VOID | Return |
OneWireSkipROM | |
Performs a bus reset and the sends the SkipROM command byte | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- VOID | Return |
SPIPrescaler | |
Modify the speed of the SPI bus | |
- BYTE | Channel |
Channel Index: Range 0 - SPI Bus Count - 1 | |
- BYTE | Prescaler |
Range: 0-2 | |
- VOID | Return |
PWMSetDuty | |
Sets the duty for the PWM output | |
- BYTE | Channel |
Range: 0-11 | |
- BYTE | Duty |
- VOID | Return |
ADCSample10 | |
Reads the voltage present on an Analog pin as an 12-bit value range 0-4095 | |
- BYTE | ADCChannel |
Range: 0, 3-7 | |
- UINT | Return |
IOSetOutputPin | |
Sets the selected digital pin to an output and assigns the output state. | |
- BYTE | Pin |
Range: 0-29 | |
- BOOL | State |
Range: 0-1 | |
- VOID | Return |
UARTReceive | |
Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available. | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- BYTE | Return |
OneWireScanBus | |
Scans the one wire bus to detect all connected devices. Returns the number of one wire devices found. | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Return |
SPIInitialise | |
Initialsie the SPI module ready for communications | |
- BYTE | Channel |
Channel Index: Range 0 - SPI Bus Count - 1 | |
- VOID | Return |
OneWireReceiveByte | |
Receives a byte from the one wire bus a bit at a time | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Return |
I2CSend | |
Transmit a byte using the I2C bus | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | DataOut |
- BOOL | Return |
UARTSend | |
Send a byte via the UART module | |
- BYTE | Channel |
Channel Index: Range 0 - UART Bus Count - 1 | |
- BYTE | Data |
Data Byte to send. Range: 0-255 | |
- VOID | Return |
OneWireGetDeviceCount | |
Returns the number of devices found by the last ScanBus operation. | |
- BYTE | Channel |
Channel Index: Range 0 - I2C Bus Count - 1 | |
- BYTE | Return |
PWMEnable | |
Enable a PWM output | |
- BYTE | Channel |
Range: 0-11 | |
- VOID | Return |
Initialise | |
Initialise the comms to the Arduino board ready for commands to be sent. | |
- VOID | Return |