Component: LCD (Grove - UART) (Alphanumeric)

Author	Matrix Ltd
Version	2.0
Category	Alphanumeric

LCD (Grove - UART) component

Standard alphanumeric LCD based on the Grove display module.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_LCD_Grove_Uart.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_LCD_Grove_Uart.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

	ClearSim
- VOID	Return

	Clear
- VOID	Return

	PrintString
- STRING	Text
- VOID	Return

	PrintAscii
Takes the ascii value for a character and prints the character
- BYTE	character
- VOID	Return

	PrintNumber
Allows you to print a number. This is limited to a signed-INT, -32768 to 32767
- INT	Number
- VOID	Return

	BacklightControl
- BYTE	State
0=Backlight Off, 1=Backlight On
- VOID	Return

	ClearLine
- BYTE	Line
- VOID	Return

	Cursor
Moves the cursor on the LCD Display
- BYTE	x
- BYTE	y
- VOID	Return

	PrintFormattedNumber
Will allow you to print a number up to 32-bits with signed or unsigned formatting. Signed = -2147483648 to 2147483647 Unsigned = 0 to 4294967295
- ULONG	Number
Enter the number or variable to print to the LCD
- BOOL	Format
0=Signed, 1=Unsigned
- VOID	Return

	ScrollDisplay
Scrolls the display left or right by a number of given positions.
- BYTE	position
Number of positions to scroll the display
- BYTE	direction
Direction to scroll the display: 0=Left, 1=Right
- VOID	Return

	PrintFloat
Print a Float number rounded up to a specified amount of decimal places.
- FLOAT	Number
Enter the number or variable to print to the LCD
- BYTE	DecimalPlaces
Enter how many decimal places to round up to (1 - 6)
- VOID	Return

	Start
Startup routine required by the hardware device.
- VOID	Return

Property reference

	Properties
	LCD Configuration
	Rows
	Columns
	Connections
	Channel
UART Channel selector Software channels are bit banged using generic I/O pins but are not as reliable as hardware channels. Hardware channels use the selected peripheral on-board the target microcontroller.
	TX
Pin to be used for Transmit data
	Use RX
Selects if the Receive pin is used by the component. Yes: The RX pin is active and used to receive data for the UART. No: The RX pin is disabled and free to be used as general I/O.
	Baud Options
Baud rate option selector
	Baud Rate
	Simulation
	Component Label
	Component Label Scale
The label scale can be change if the amout of text is too wide for the display
	Text Colour
Colour of the font characters drawn on the display
	Text Background
	Display Background
	Scope Traces
Selects if the scope traces are automatically added to the data recorder window or not. Simulation - draws an approximation of the UART data onto the scope trace. ICT - sets up the scope trace for incoming data and adds UART packet decoding at the correct BAUD.
	Console Data
Selects if the console data is automatically generated or not
	Console Columns
Number of characters that can be displayed on a single line of the console.
	Data Source
Simulation data source used to allow the component to connect to various remote devices Nothing - Simulation data is ignored COM port - Routes the communication data to and from a physical or virtual COM port Injector - Routes the communication data via a data injector component on the Panel.