Component: Potentiometer (Trimmer) Free ()
From Flowcode Help
Jump to navigationJump to search| Author | Matrix Ltd |
| Version | 1.4 |
| Category |
Contents
Potentiometer (Trimmer) Free component
Trim Pot for 0.1mm pitch PCB. With finger dial knob. Pointer colour can be changed from component properties.
Component Source Code
Please click here to view the component source code (Beta): FC_Comp_Source_knob_trim_finger_free.fcfx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Macro reference
Property reference
|
Properties |
|
Simulation |
|
Start Angle |
| Angle the control points to at its lowest setting. Measured counter-clockwise from the positive x-axis. | |
|
|
Sweep Angle |
| Angle through which the control sweeps as it turns from minimum to maximum. | |
|
Color |
|
Scope Traces |
| Selects if the scope traces are automatically generated or not | |
|
|
Connections |
|
Channel |
| Analogue input channel - which pin is the analogue input conected to? | |
|
|
Settings |
|
VRef voltage |
| Used by the GetVoltage or GetString component macros to take an ADC reading and convert it into a Voltage. +VRef voltage x 10mV Default 500 = 5.0V | |
|
VRef option |
| Defines what is used as the ADC maximum reference. ADC Range = GND to VRef Voltage. VDD - Defines the microcontrollers power supply pin as the max reference, VREF+ Pin - Dedicated pin on the microcontroller to allow for a variable reference voltage. | |
|
|
Conversion speed |
| Clock setting to select how fast the ADC peripheral will perform an ADC conversion. The FRC setting is based on a RC time base and so will vary with temperature and pressure. Other settings are generally based on divisions of the master clock. | |
|
|
Acquisition cycles |
| Number of micro seconds to wait for the ACD input to charge before starting the analogue sample. | |
|
|
Bit Depth |
| Maximum number of digital bits the ADC can sample. 8 bit = ADC range 0 - 255 10 bit = ADC range 0 - 1023 12 bit = ADC range 0 - 4095 | |
==Macro reference==
Property reference
|
|
Properties |
|
|
Simulation |
|
|
Start Angle |
| Angle the control points to at its lowest setting. Measured counter-clockwise from the positive x-axis. | |
|
|
Sweep Angle |
| Angle through which the control sweeps as it turns from minimum to maximum. | |
|
|
Color |
|
|
Scope Traces |
| Selects if the scope traces are automatically generated or not | |
|
|
Connections |
|
|
Channel |
| Analogue input channel - which pin is the analogue input conected to? | |
|
|
Settings |
|
|
VRef voltage |
| Used by the GetVoltage or GetString component macros to take an ADC reading and convert it into a Voltage. +VRef voltage x 10mV Default 500 = 5.0V | |
|
|
VRef option |
| Defines what is used as the ADC maximum reference. ADC Range = GND to VRef Voltage. VDD - Defines the microcontrollers power supply pin as the max reference, VREF+ Pin - Dedicated pin on the microcontroller to allow for a variable reference voltage. | |
|
|
Conversion speed |
| Clock setting to select how fast the ADC peripheral will perform an ADC conversion. The FRC setting is based on a RC time base and so will vary with temperature and pressure. Other settings are generally based on divisions of the master clock. | |
|
|
Acquisition cycles |
| Number of micro seconds to wait for the ACD input to charge before starting the analogue sample. | |
|
|
Bit Depth |
| Maximum number of digital bits the ADC can sample. 8 bit = ADC range 0 - 255 10 bit = ADC range 0 - 1023 12 bit = ADC range 0 - 4095 | |
