Component: Switch (BL0145) (E-blocks 2)

Author	Matrix TSL
Version	1.0
Category	E-blocks 2

Switch component

A set of 8 push switches that can be connected to an E-blocks 2 upstream board via a port connector. Switches are wired in an active high configuration.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_EBlocks2_Switch_BL0145.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_EBlocks2_Switch_BL0145.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

	ReadState
Read the state of the switch at the given index.
- BYTE	Index
The switch to read the status of.
- BOOL	Return

	WaitUntilHigh
Pause the program until the switch at the given index is turned on.
- BYTE	Index
Index of the switch to wait for.
- VOID	Return

	ReadAll
Reads all of the switches at once, returning a byte containing one bit per switch.
- BYTE	Return

	WaitUntilLow
Pause the program until the switch at the given index is turned on.
- BYTE	Index
Index of the switch to wait for.
- VOID	Return

Property reference

	Properties
	Connections
	Input Mode
Choose how your switches are connected. PORT = Single port byte for all switches - pins are allocated in sequence from pin 0 - X Custom = Individual pin by pin connections
	Port

==Macro reference==

	ReadState
Read the state of the switch at the given index.
- BYTE	Index
The switch to read the status of.
- BOOL	Return

	WaitUntilHigh
Pause the program until the switch at the given index is turned on.
- BYTE	Index
Index of the switch to wait for.
- VOID	Return

	ReadAll
Reads all of the switches at once, returning a byte containing one bit per switch.
- BYTE	Return

	WaitUntilLow
Pause the program until the switch at the given index is turned on.
- BYTE	Index
Index of the switch to wait for.
- VOID	Return

Property reference

	Properties
	Connections
	Input Mode
Choose how your switches are connected. PORT = Single port byte for all switches - pins are allocated in sequence from pin 0 - X Custom = Individual pin by pin connections
	Port

==Macro reference==

	ReadState
Read the state of the switch at the given index.
- BYTE	Index
The switch to read the status of.
- BOOL	Return

	WaitUntilHigh
Pause the program until the switch at the given index is turned on.
- BYTE	Index
Index of the switch to wait for.
- VOID	Return

	ReadAll
Reads all of the switches at once, returning a byte containing one bit per switch.
- BYTE	Return

	WaitUntilLow
Pause the program until the switch at the given index is turned on.
- BYTE	Index
Index of the switch to wait for.
- VOID	Return

Property reference

	Properties
	Connections
	Input Mode
Choose how your switches are connected. PORT = Single port byte for all switches - pins are allocated in sequence from pin 0 - X Custom = Individual pin by pin connections
	Port

==Macro reference==

	ReadState
Read the state of the switch at the given index.
- BYTE	Index
The switch to read the status of.
- BOOL	Return

	WaitUntilHigh
Pause the program until the switch at the given index is turned on.
- BYTE	Index
Index of the switch to wait for.
- VOID	Return

	ReadAll
Reads all of the switches at once, returning a byte containing one bit per switch.
- BYTE	Return

	WaitUntilLow
Pause the program until the switch at the given index is turned on.
- BYTE	Index
Index of the switch to wait for.
- VOID	Return

Property reference

	Properties
	Connections
	Input Mode
Choose how your switches are connected. PORT = Single port byte for all switches - pins are allocated in sequence from pin 0 - X Custom = Individual pin by pin connections
	Port