Component: LCD (ST7032i) (Alphanumeric)
From Flowcode Help
Jump to navigationJump to search
| Author | Matrix Ltd |
| Version | 2.1 |
| Category | Alphanumeric |
Contents
LCD (ST7032i) component
Standard alphanumeric LCD based on the ST7032i LCD driver IC connected using I2C.
Component Source Code
Please click here for the component source code: FC_Comp_Source_LCD_ST7032i.fcfx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Downloadable macro reference
|
Clear |
 - VOID
|
Return |
|
|
PrintString |
 - STRING
|
Text |
| - VOID
|
Return |
|
|
PrintAscii |
| Takes the ascii value for a character and prints the character | |
 - BYTE
|
character |
| - VOID
|
Return |
|
|
PrintNumber |
| Allows you to print a number. This is limited to a signed-INT, -32768 to 32767 | |
 - INT
|
Number |
| - VOID
|
Return |
|
|
RAMWrite |
| Modifies the internal memory of the LCD to allow for up to 8 customised characters to be created and stored in the device memory | |
| - BYTE
|
Index |
| - BYTE
|
d0 |
| - BYTE
|
d1 |
| - BYTE
|
d2 |
| - BYTE
|
d3 |
| - BYTE
|
d4 |
| - BYTE
|
d5 |
| - BYTE
|
d6 |
| - BYTE
|
d7 |
| - VOID
|
Return |
|
|
ClearLine |
| - BYTE
|
Line |
| - VOID
|
Return |
|
|
Cursor |
| Moves the cursor on the LCD Display | |
| - BYTE
|
x |
| - BYTE
|
y |
| - VOID
|
Return |
|
|
Command |
| Use this method/macro to send a specific command to the LCD. Refer to the Matrix Multimedia EB006 datasheet for a list of supported instructions. For Non-Matrix LCD's refer to the manufacturers datasheet. | |
| - BYTE
|
instruction |
| - VOID
|
Return |
|
|
PrintFormattedNumber |
| Will allow you to print a number up to 32-bits with signed or unsigned formatting. Signed = -2147483648 to 2147483647 Unsigned = 0 to 4294967295 | |
 - ULONG
|
Number |
| Enter the number or variable to print to the LCD | |
 - BOOL
|
Format |
| 0=Signed, 1=Unsigned | |
| - VOID
|
Return |
|
|
ScrollDisplay |
| Scrolls the display left or right by a number of given positions. | |
| - BYTE
|
position |
| - BYTE
|
direction |
| - VOID
|
Return |
|
|
PrintFloat |
| Print a Float number rounded up to a specified amount of decimal places. | |
 - FLOAT
|
Number |
| Enter the number or variable to print to the LCD | |
| - BYTE
|
DecimalPlaces |
| Enter how many decimal places to round up to (1 - 6) | |
| - VOID
|
Return |
|
|
Start |
| Startup routine required by the hardware device. | |
| - VOID
|
Return |
Property reference
|
Properties |
|
I2C Config |
|
Channel |
| Channel selection | |
|
|
Baud Select |
| Baud rate option selector | |
|
Baud Rate |
| Baud rate to be used | |
|
Stop Delay |
| On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not a 10ms delay between an I2C stop event and the next I2C start event. Most modern microcontrollers will not have a problem so this property can be disabled to speed up the I2C communications. | |
|
|
Connections |
|
SDA |
| Pin used for SDA (data signal) | |
|
|
SCL |
| Pin used for SCL (clock signal) | |
|
|
LCD Configuration |
|
|
Voltage |
| Configures things like the display default contrast and follower | |
|
|
Rows |
|
|
Columns |
|
|
Simulation |
|
|
Component Label |
|
Component Label Scale |
| The label scale can be change if the amout of text is too wide for the display | |
|
Text Colour |
| Colour of the font characters drawn on the display | |
|
|
Text Background |
| Colour surrounding the font characters drawn on the display | |
|
|
Display Background |
| Colour of the background of the display | |
|
|
Simulate Comms |
| Used to drive the comms durig simulation which can be used to: Data Recorder waveform generation Console Logging Data Injector to redirect the data e.g. to a SCADA slave connected to the physical hardware | |
