Component: LTSR Current Transducer (Electrical)
From Flowcode Help
Jump to navigationJump to search| Author | medelec35 |
| Version | 1.0 |
| Category | Electrical |
Contents
LTSR Current Transducer component
LTSR rage of +/- 6, 15 & 25A current Tranducers
Component Source Code
Please click here to view the component source code (Beta): FC_Comp_Source_LTSR_Current_Transducer.fcfx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Macro reference
|
Current |
 - FLOAT
|
Return |
Property reference
|
Properties |
|
Device |
|
VDD |
|
Channel |
| Analogue Input Channel - Which pin is the analogue input connected to? | |
|
|
VRef option |
| Defines what is used as the ADC maximum reference. ADC Range = GND to VRef Voltage VDD - Defines the microcontrollers power supply pin as the max reference, VREF+ Pin - Dedicated pin on the microcontroller to allow for a variable reference voltage. | |
|
VRef voltage |
| Used by the GetVoltage or GetString component macros to take an ADC reading and convert it into a Voltage. +VRef voltage x 10mV Default 500 = 5.0V | |
|
|
Conversion speed |
| Clock setting to select how fast the ADC peripheral will perform an ADC conversion. The FRC setting is based on a RC time base and so will vary with temperature and pressure. Other settings are generally based on divisions of the master clock. | |
|
|
Acquisition cycles |
| Number of micro seconds to wait for the ADC input to charge before starting the analogue sample. | |
==Macro reference==
|
|
Current |
| - FLOAT
|
Return |
Property reference
|
|
Properties |
|
|
Device |
|
|
VDD |
|
|
Channel |
| Analogue Input Channel - Which pin is the analogue input connected to? | |
|
|
VRef option |
| Defines what is used as the ADC maximum reference. ADC Range = GND to VRef Voltage VDD - Defines the microcontrollers power supply pin as the max reference, VREF+ Pin - Dedicated pin on the microcontroller to allow for a variable reference voltage. | |
|
|
VRef voltage |
| Used by the GetVoltage or GetString component macros to take an ADC reading and convert it into a Voltage. +VRef voltage x 10mV Default 500 = 5.0V | |
|
|
Conversion speed |
| Clock setting to select how fast the ADC peripheral will perform an ADC conversion. The FRC setting is based on a RC time base and so will vary with temperature and pressure. Other settings are generally based on divisions of the master clock. | |
|
|
Acquisition cycles |
| Number of micro seconds to wait for the ADC input to charge before starting the analogue sample. | |
